ARM: UniPhier: update the vendor name of UniPhier in Kconfig

The business for UniPhier Soc family has been transferred from
Panasonic Corporation to Socionext Inc.

Update the SoC select menu in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/Kconfig

@@ -786,7 +786,7 @@ config TARGET_JORNADA
 	select CPU_SA1100
 
 config ARCH_UNIPHIER
-	bool "Panasonic UniPhier platform"
+	bool "Socionext UniPhier SoCs"
 	select CPU_V7
 	select SUPPORT_SPL
 	select SPL
@@ -794,6 +794,9 @@ config ARCH_UNIPHIER
 	select DM
 	select DM_SERIAL
 	select DM_I2C
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
 
 config TARGET_STM32F429_DISCOVERY
 	bool "Support STM32F429 Discovery"

arch/arm/mach-uniphier/Kconfig

@@ -1,5 +1,4 @@
-menu "Panasonic UniPhier platform"
-	depends on ARCH_UNIPHIER
+if ARCH_UNIPHIER
 
 config SYS_CONFIG_NAME
 	default "uniphier"
@@ -78,4 +77,4 @@ config DDR_FREQ
 	default 1333 if DDR_FREQ_1333
 	default 1600 if DDR_FREQ_1600
 
-endmenu
+endif

drivers/i2c/Kconfig

@@ -63,13 +63,13 @@ config SYS_I2C_UNIPHIER
 	depends on ARCH_UNIPHIER && DM_I2C
 	default y
 	help
-	  Support for Panasonic UniPhier I2C controller driver.  This I2C
-	  controller is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
+	  Support for UniPhier I2C controller driver.  This I2C controller
+	  is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
 
 config SYS_I2C_UNIPHIER_F
 	bool "UniPhier FIFO-builtin I2C driver"
 	depends on ARCH_UNIPHIER && DM_I2C
 	default y
 	help
-	  Support for Panasonic UniPhier FIFO-builtin I2C controller driver.
+	  Support for UniPhier FIFO-builtin I2C controller driver.
 	  This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.

drivers/serial/Kconfig

@@ -77,7 +77,8 @@ config DEBUG_UART_SHIFT
 	  registers, 2=32-bit word registers, etc.
 
 config UNIPHIER_SERIAL
-	bool "UniPhier on-chip UART support"
+	bool "Support for UniPhier on-chip UART"
 	depends on ARCH_UNIPHIER && DM_SERIAL
 	help
-	  Support for the on-chip UARTs on the Panasonic UniPhier platform.
+	  If you have a UniPhier based board and want to use the on-chip
+	  serial ports, say Y to this option. If unsure, say N.

drivers/usb/host/Kconfig

@@ -18,12 +18,11 @@ config USB_XHCI
 if USB_XHCI_HCD
 
 config USB_XHCI_UNIPHIER
-	bool "Support for Panasonic UniPhier on-chip xHCI USB controller"
+	bool "Support for UniPhier on-chip xHCI USB controller"
 	depends on ARCH_UNIPHIER
 	default y
 	---help---
-	  Enables support for the on-chip xHCI controller on Panasonic
-	  UniPhier SoCs.
+	  Enables support for the on-chip xHCI controller on UniPhier SoCs.
 
 endif
 
@@ -54,11 +53,10 @@ config USB_EHCI
 if USB_EHCI_HCD
 
 config USB_EHCI_UNIPHIER
-	bool "Support for Panasonic UniPhier on-chip EHCI USB controller"
+	bool "Support for UniPhier on-chip EHCI USB controller"
 	depends on ARCH_UNIPHIER && OF_CONTROL
 	default y
 	---help---
-	  Enables support for the on-chip EHCI controller on Panasonic
-	  UniPhier SoCs.
+	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
 
 endif