Fix number base handling of "load" command

As documented, almost all U-Boot commands expect numbers to be entered
in hexadecimal input format. (Exception: for historical reasons, the
"sleep" command takes its argument in decimal input format.)

This rule was broken for the "load" command; for details please see
especially commits 045fa1e "fs: add filesystem switch libary,
implement ls and fsload commands" and 3f83c87 "fs: fix number base
behaviour change in fatload/ext*load".  In the result, the load
command would always require an explicit "0x" prefix for regular
(i. e. base 16 formatted) input.

Change this to use the standard notation of base 16 input format.
While strictly speaking this is a change of the user interface, we
hope that it will not cause trouble.  Stephen Warren comments (see
[1]):

        I suppose you can change the behaviour if you want; anyone
        writing "0x..." for their values presumably won't be
        affected, and if people really do assume all values in U-Boot
        are in hex, presumably nobody currently relies upon using
        non-prefixed values with the generic load command, since it
        doesn't work like that right now.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/171172

Acked-by: Tom Rini <trini@ti.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

common/cmd_ext2.c

@@ -32,7 +32,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  */
 int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT);
 }
 
 U_BOOT_CMD(
@@ -47,6 +47,5 @@ U_BOOT_CMD(
 	"load binary file from a Ext2 filesystem",
 	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
-	"      to address 'addr' from ext2 filesystem.\n"
-	"      All numeric parameters are assumed to be hex."
+	"      to address 'addr' from ext2 filesystem."
 );

common/cmd_ext4.c

@@ -45,7 +45,7 @@
 int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,
 						char *const argv[])
 {
-	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT);
 }
 
 int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
@@ -122,5 +122,4 @@ U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
 	   "load binary file from a Ext4 filesystem",
 	   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"
 	   "    - load binary file 'filename' from 'dev' on 'interface'\n"
-	   "      to address 'addr' from ext4 filesystem.\n"
-	   "      All numeric parameters are assumed to be hex.");
+	   "      to address 'addr' from ext4 filesystem");

common/cmd_fat.c

@@ -19,7 +19,7 @@
 
 int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16);
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT);
 }
 
 
@@ -35,8 +35,7 @@ U_BOOT_CMD(
 	"      the load stops on end of file.\n"
 	"      If either 'pos' or 'bytes' are not aligned to\n"
 	"      ARCH_DMA_MINALIGN then a misaligned buffer warning will\n"
-	"      be printed and performance will suffer for the load.\n"
-	"      All numeric parameters are assumed to be hex."
+	"      be printed and performance will suffer for the load."
 );
 
 static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

common/cmd_fs.c

@@ -22,7 +22,7 @@
 
 int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0);
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY);
 }
 
 U_BOOT_CMD(
@@ -34,9 +34,7 @@ U_BOOT_CMD(
 	"      'bytes' gives the size to load in bytes.\n"
 	"      If 'bytes' is 0 or omitted, the file is read until the end.\n"
 	"      'pos' gives the file byte position to start reading from.\n"
-	"      If 'pos' is 0 or omitted, the file is read from the start.\n"
-	"      All numeric parameters are assumed to be decimal,\n"
-	"      unless specified otherwise using a leading \"0x\"."
+	"      If 'pos' is 0 or omitted, the file is read from the start."
 );
 
 int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

fs/fs.c

@@ -231,7 +231,7 @@ int fs_write(const char *filename, ulong addr, int offset, int len)
 }
 
 int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
-		int fstype, int cmdline_base)
+		int fstype)
 {
 	unsigned long addr;
 	const char *addr_str;
@@ -250,7 +250,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 		return 1;
 
 	if (argc >= 4) {
-		addr = simple_strtoul(argv[3], NULL, cmdline_base);
+		addr = simple_strtoul(argv[3], NULL, 16);
 	} else {
 		addr_str = getenv("loadaddr");
 		if (addr_str != NULL)
@@ -268,11 +268,11 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 		}
 	}
 	if (argc >= 6)
-		bytes = simple_strtoul(argv[5], NULL, cmdline_base);
+		bytes = simple_strtoul(argv[5], NULL, 16);
 	else
 		bytes = 0;
 	if (argc >= 7)
-		pos = simple_strtoul(argv[6], NULL, cmdline_base);
+		pos = simple_strtoul(argv[6], NULL, 16);
 	else
 		pos = 0;
 
@@ -313,7 +313,7 @@ int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 }
 
 int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
-		int fstype, int cmdline_base)
+		int fstype)
 {
 	unsigned long addr;
 	const char *filename;
@@ -329,10 +329,10 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 		return 1;
 
 	filename = argv[3];
-	addr = simple_strtoul(argv[4], NULL, cmdline_base);
-	bytes = simple_strtoul(argv[5], NULL, cmdline_base);
+	addr = simple_strtoul(argv[4], NULL, 16);
+	bytes = simple_strtoul(argv[5], NULL, 16);
 	if (argc >= 7)
-		pos = simple_strtoul(argv[6], NULL, cmdline_base);
+		pos = simple_strtoul(argv[6], NULL, 16);
 	else
 		pos = 0;
 

include/fs.h

@@ -59,10 +59,10 @@ int fs_read(const char *filename, ulong addr, int offset, int len);
  * to a specific filesystem type via the fstype parameter.
  */
 int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
-		int fstype, int cmdline_base);
+		int fstype);
 int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 		int fstype);
 int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
-		int fstype, int cmdline_base);
+		int fstype);
 
 #endif /* _FS_H */