ARM: stm32: cleanup stm32f7 files

Cleanup stm32f7 files:
- use BIT macro
- use GENMASK macro
- use rcc struct instead of macro additions

Add missing stm32f7 register in rcc struct

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
master
Michael Kurz 8 years ago committed by Tom Rini
parent b1a8de7e07
commit bad5188be2
  1. 6
      arch/arm/include/asm/arch-stm32f7/fmc.h
  2. 6
      arch/arm/include/asm/arch-stm32f7/gpt.h
  3. 50
      arch/arm/include/asm/arch-stm32f7/rcc.h
  4. 12
      arch/arm/include/asm/arch-stm32f7/stm32.h
  5. 100
      arch/arm/mach-stm32/stm32f7/clock.c
  6. 7
      board/st/stm32f746-disco/stm32f746-disco.c

@ -58,12 +58,12 @@ struct stm32_fmc_regs {
#define FMC_SDCMR_MODE_SELFREFRESH 5
#define FMC_SDCMR_MODE_POWERDOWN 6
#define FMC_SDCMR_BANK_1 (1 << 4)
#define FMC_SDCMR_BANK_2 (1 << 3)
#define FMC_SDCMR_BANK_1 BIT(4)
#define FMC_SDCMR_BANK_2 BIT(3)
#define FMC_SDCMR_MODE_REGISTER_SHIFT 9
#define FMC_SDSR_BUSY (1 << 5)
#define FMC_SDSR_BUSY BIT(5)
#define FMC_BUSY_WAIT() do { \
__asm__ __volatile__ ("dsb" : : : "memory"); \

@ -38,8 +38,8 @@ struct gpt_regs *const gpt1_regs_ptr =
(struct gpt_regs *)TIM2_BASE;
/* Timer control1 register */
#define GPT_CR1_CEN 0x0001
#define GPT_MODE_AUTO_RELOAD (1 << 7)
#define GPT_CR1_CEN BIT(0)
#define GPT_MODE_AUTO_RELOAD BIT(7)
/* Auto reload register for free running config */
#define GPT_FREE_RUNNING 0xFFFFFFFF
@ -48,6 +48,6 @@ struct gpt_regs *const gpt1_regs_ptr =
#define CONFIG_STM32_HZ 1000
/* Timer Event Generation registers */
#define TIM_EGR_UG (1 << 0)
#define TIM_EGR_UG BIT(0)
#endif

@ -34,31 +34,43 @@
#define RCC_PLLSAICFG 0x88 /* PLLSAI configuration */
#define RCC_DCKCFG1 0x8C /* dedicated clocks configuration register */
#define RCC_DCKCFG2 0x90 /* dedicated clocks configuration register */
/*
* RCC AHB1ENR specific definitions
*/
#define RCC_AHB1ENR_GPIO_A_EN BIT(0)
#define RCC_AHB1ENR_GPIO_B_EN BIT(1)
#define RCC_AHB1ENR_GPIO_C_EN BIT(2)
#define RCC_AHB1ENR_GPIO_D_EN BIT(3)
#define RCC_AHB1ENR_GPIO_E_EN BIT(4)
#define RCC_AHB1ENR_GPIO_F_EN BIT(5)
#define RCC_AHB1ENR_GPIO_G_EN BIT(6)
#define RCC_AHB1ENR_GPIO_H_EN BIT(7)
#define RCC_AHB1ENR_GPIO_I_EN BIT(8)
#define RCC_AHB1ENR_GPIO_J_EN BIT(9)
#define RCC_AHB1ENR_GPIO_K_EN BIT(10)
#define RCC_AHB1ENR_ETHMAC_EN BIT(25)
#define RCC_AHB1ENR_ETHMAC_TX_EN BIT(26)
#define RCC_AHB1ENR_ETHMAC_RX_EN BIT(27)
#define RCC_AHB1ENR_ETHMAC_PTP_EN BIT(28)
#define RCC_APB1ENR_TIM2EN (1 << 0)
#define RCC_APB1ENR_PWREN (1 << 28)
/*
* RCC AHB3ENR specific definitions
*/
#define RCC_AHB3ENR_FMC_EN BIT(0)
/*
* RCC USART specific definitions
* RCC APB1ENR specific definitions
*/
#define RCC_ENR_USART1EN (1 << 4)
#define RCC_ENR_USART2EN (1 << 17)
#define RCC_ENR_USART3EN (1 << 18)
#define RCC_ENR_USART6EN (1 << 5)
#define RCC_APB1ENR_TIM2EN BIT(0)
#define RCC_APB1ENR_USART2EN BIT(17)
#define RCC_APB1ENR_USART3EN BIT(18)
#define RCC_APB1ENR_PWREN BIT(28)
/*
* RCC GPIO specific definitions
* RCC APB2ENR specific definitions
*/
#define RCC_ENR_GPIO_A_EN (1 << 0)
#define RCC_ENR_GPIO_B_EN (1 << 1)
#define RCC_ENR_GPIO_C_EN (1 << 2)
#define RCC_ENR_GPIO_D_EN (1 << 3)
#define RCC_ENR_GPIO_E_EN (1 << 4)
#define RCC_ENR_GPIO_F_EN (1 << 5)
#define RCC_ENR_GPIO_G_EN (1 << 6)
#define RCC_ENR_GPIO_H_EN (1 << 7)
#define RCC_ENR_GPIO_I_EN (1 << 8)
#define RCC_ENR_GPIO_J_EN (1 << 9)
#define RCC_ENR_GPIO_K_EN (1 << 10)
#define RCC_APB2ENR_USART1EN BIT(4)
#define RCC_APB2ENR_USART6EN BIT(5)
#define RCC_APB2ENR_SYSCFGEN BIT(14)
#endif

@ -32,6 +32,7 @@
#define USART1_BASE (APB2_PERIPH_BASE + 0x1000)
#define USART6_BASE (APB2_PERIPH_BASE + 0x1400)
#define STM32_SYSCFG_BASE (APB2_PERIPH_BASE + 0x3800)
#define STM32_GPIOA_BASE (AHB1_PERIPH_BASE + 0x0000)
#define STM32_GPIOB_BASE (AHB1_PERIPH_BASE + 0x0400)
@ -62,7 +63,7 @@ enum clock {
CLOCK_APB1,
CLOCK_APB2
};
#define STM32_BUS_MASK 0xFFFF0000
#define STM32_BUS_MASK GENMASK(31, 16)
struct stm32_rcc_regs {
u32 cr; /* RCC clock control */
@ -95,11 +96,16 @@ struct stm32_rcc_regs {
u32 rsv6[2];
u32 sscgr; /* RCC spread spectrum clock generation */
u32 plli2scfgr; /* RCC PLLI2S configuration */
u32 pllsaicfgr;
u32 dckcfgr;
u32 pllsaicfgr; /* PLLSAI configuration */
u32 dckcfgr; /* dedicated clocks configuration register */
};
#define STM32_RCC ((struct stm32_rcc_regs *)RCC_BASE)
struct stm32_rcc_ext_f7_regs {
u32 dckcfgr2; /* dedicated clocks configuration register */
};
#define STM32_RCC_EXT_F7 ((struct stm32_rcc_ext_f7_regs *) (RCC_BASE + sizeof(struct stm32_rcc_regs)))
struct stm32_pwr_regs {
u32 cr1; /* power control register 1 */
u32 csr1; /* power control/status register 2 */

@ -11,36 +11,36 @@
#include <asm/arch/stm32.h>
#include <asm/arch/stm32_periph.h>
#define RCC_CR_HSION (1 << 0)
#define RCC_CR_HSEON (1 << 16)
#define RCC_CR_HSERDY (1 << 17)
#define RCC_CR_HSEBYP (1 << 18)
#define RCC_CR_CSSON (1 << 19)
#define RCC_CR_PLLON (1 << 24)
#define RCC_CR_PLLRDY (1 << 25)
#define RCC_CR_HSION BIT(0)
#define RCC_CR_HSEON BIT(16)
#define RCC_CR_HSERDY BIT(17)
#define RCC_CR_HSEBYP BIT(18)
#define RCC_CR_CSSON BIT(19)
#define RCC_CR_PLLON BIT(24)
#define RCC_CR_PLLRDY BIT(25)
#define RCC_PLLCFGR_PLLM_MASK 0x3F
#define RCC_PLLCFGR_PLLN_MASK 0x7FC0
#define RCC_PLLCFGR_PLLP_MASK 0x30000
#define RCC_PLLCFGR_PLLQ_MASK 0xF000000
#define RCC_PLLCFGR_PLLSRC (1 << 22)
#define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0)
#define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6)
#define RCC_PLLCFGR_PLLP_MASK GENMASK(17, 16)
#define RCC_PLLCFGR_PLLQ_MASK GENMASK(27, 24)
#define RCC_PLLCFGR_PLLSRC BIT(22)
#define RCC_PLLCFGR_PLLM_SHIFT 0
#define RCC_PLLCFGR_PLLN_SHIFT 6
#define RCC_PLLCFGR_PLLP_SHIFT 16
#define RCC_PLLCFGR_PLLQ_SHIFT 24
#define RCC_CFGR_AHB_PSC_MASK 0xF0
#define RCC_CFGR_APB1_PSC_MASK 0x1C00
#define RCC_CFGR_APB2_PSC_MASK 0xE000
#define RCC_CFGR_SW0 (1 << 0)
#define RCC_CFGR_SW1 (1 << 1)
#define RCC_CFGR_SW_MASK 0x3
#define RCC_CFGR_AHB_PSC_MASK GENMASK(7, 4)
#define RCC_CFGR_APB1_PSC_MASK GENMASK(12, 10)
#define RCC_CFGR_APB2_PSC_MASK GENMASK(15, 13)
#define RCC_CFGR_SW0 BIT(0)
#define RCC_CFGR_SW1 BIT(1)
#define RCC_CFGR_SW_MASK GENMASK(1, 0)
#define RCC_CFGR_SW_HSI 0
#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
#define RCC_CFGR_SWS0 (1 << 2)
#define RCC_CFGR_SWS1 (1 << 3)
#define RCC_CFGR_SWS_MASK 0xC
#define RCC_CFGR_SWS0 BIT(2)
#define RCC_CFGR_SWS1 BIT(3)
#define RCC_CFGR_SWS_MASK GENMASK(3, 2)
#define RCC_CFGR_SWS_HSI 0
#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
@ -48,39 +48,13 @@
#define RCC_CFGR_PPRE1_SHIFT 10
#define RCC_CFGR_PPRE2_SHIFT 13
#define RCC_APB1ENR_PWREN (1 << 28)
/*
* RCC USART specific definitions
*/
#define RCC_ENR_USART1EN (1 << 4)
#define RCC_ENR_USART2EN (1 << 17)
#define RCC_ENR_USART3EN (1 << 18)
#define RCC_ENR_USART6EN (1 << 5)
/*
* Offsets of some PWR registers
*/
#define PWR_CR1_ODEN (1 << 16)
#define PWR_CR1_ODSWEN (1 << 17)
#define PWR_CSR1_ODRDY (1 << 16)
#define PWR_CSR1_ODSWRDY (1 << 17)
/*
* RCC GPIO specific definitions
*/
#define RCC_ENR_GPIO_A_EN (1 << 0)
#define RCC_ENR_GPIO_B_EN (1 << 1)
#define RCC_ENR_GPIO_C_EN (1 << 2)
#define RCC_ENR_GPIO_D_EN (1 << 3)
#define RCC_ENR_GPIO_E_EN (1 << 4)
#define RCC_ENR_GPIO_F_EN (1 << 5)
#define RCC_ENR_GPIO_G_EN (1 << 6)
#define RCC_ENR_GPIO_H_EN (1 << 7)
#define RCC_ENR_GPIO_I_EN (1 << 8)
#define RCC_ENR_GPIO_J_EN (1 << 9)
#define RCC_ENR_GPIO_K_EN (1 << 10)
#define PWR_CR1_ODEN BIT(16)
#define PWR_CR1_ODSWEN BIT(17)
#define PWR_CSR1_ODRDY BIT(16)
#define PWR_CSR1_ODSWRDY BIT(17)
struct pll_psc {
u8 pll_m;
@ -243,40 +217,40 @@ void clock_setup(int peripheral)
{
switch (peripheral) {
case USART1_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN);
setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_USART1EN);
break;
case GPIO_A_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_A_EN);
break;
case GPIO_B_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_B_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_B_EN);
break;
case GPIO_C_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_C_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_C_EN);
break;
case GPIO_D_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_D_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_D_EN);
break;
case GPIO_E_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_E_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_E_EN);
break;
case GPIO_F_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_F_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_F_EN);
break;
case GPIO_G_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_G_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_G_EN);
break;
case GPIO_H_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_H_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_H_EN);
break;
case GPIO_I_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_I_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_I_EN);
break;
case GPIO_J_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_J_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_J_EN);
break;
case GPIO_K_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_K_EN);
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_K_EN);
break;
default:
break;

@ -114,11 +114,6 @@ out:
return rv;
}
/*
* STM32 RCC FMC specific definitions
*/
#define RCC_ENR_FMC (1 << 0) /* FMC module clock */
static inline u32 _ns2clk(u32 ns, u32 freq)
{
u32 tmp = freq/1000000;
@ -176,7 +171,7 @@ int dram_init(void)
if (rv)
return rv;
setbits_le32(RCC_BASE + RCC_AHB3ENR, RCC_ENR_FMC);
setbits_le32(&STM32_RCC->ahb3enr, RCC_AHB3ENR_FMC_EN);
/*
* Get frequency for NS2CLK calculation.

Loading…
Cancel
Save