Merge git://git.denx.de/u-boot-fsl-qoriq

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -76,6 +76,13 @@ config SECURE_BOOT
 	help
 		Enable Freescale Secure Boot feature
 
+config QSPI_AHB_INIT
+	bool "Init the QSPI AHB bus"
+	help
+	  The default setting for QSPI AHB bus just support 3bytes addressing.
+	  But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
+	  bus for those flashes to support the full QSPI flash size.
+
 config SYS_FSL_IFC_BANK_COUNT
 	int "Maximum banks of Integrated flash controller"
 	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -26,6 +26,9 @@
 #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
 #include <asm/armv8/sec_firmware.h>
 #endif
+#ifdef CONFIG_SYS_FSL_DDR
+#include <fsl_ddr.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -403,7 +406,9 @@ int arch_early_init_r(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 	erratum_a009635();
 #endif
-
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
+	erratum_a009942_check_cpo();
+#endif
 #ifdef CONFIG_MP
 #if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
 	/* Check the psci version to determine if the psci is supported */

arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c

@@ -36,6 +36,7 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 	{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
 	{0x39, {SGMII8, SGMII7, SGMII6, PCIE2, SGMII4, SGMII3, SGMII2,
 		PCIE1 } },
+	{0x3B, {XFI8, XFI7, XFI6, PCIE2, XFI4, XFI3, XFI2, PCIE1 } },
 	{0x4B, {PCIE2, PCIE2, PCIE2, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
 	{0x4C, {XFI8, XFI7, XFI6, XFI5, PCIE1, PCIE1, PCIE1, PCIE1 } },
 	{0x4D, {SGMII8, SGMII7, PCIE2, PCIE2, SGMII4, SGMII3, PCIE1, PCIE1 } },

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -373,6 +373,45 @@ void fsl_lsch2_early_init_f(void)
 }
 #endif
 
+#ifdef CONFIG_QSPI_AHB_INIT
+/* Enable 4bytes address support and fast read */
+int qspi_ahb_init(void)
+{
+	u32 *qspi_lut, lut_key, *qspi_key;
+
+	qspi_key = (void *)SYS_FSL_QSPI_ADDR + 0x300;
+	qspi_lut = (void *)SYS_FSL_QSPI_ADDR + 0x310;
+
+	lut_key = in_be32(qspi_key);
+
+	if (lut_key == 0x5af05af0) {
+		/* That means the register is BE */
+		out_be32(qspi_key, 0x5af05af0);
+		/* Unlock the lut table */
+		out_be32(qspi_key + 1, 0x00000002);
+		out_be32(qspi_lut, 0x0820040c);
+		out_be32(qspi_lut + 1, 0x1c080c08);
+		out_be32(qspi_lut + 2, 0x00002400);
+		/* Lock the lut table */
+		out_be32(qspi_key, 0x5af05af0);
+		out_be32(qspi_key + 1, 0x00000001);
+	} else {
+		/* That means the register is LE */
+		out_le32(qspi_key, 0x5af05af0);
+		/* Unlock the lut table */
+		out_le32(qspi_key + 1, 0x00000002);
+		out_le32(qspi_lut, 0x0820040c);
+		out_le32(qspi_lut + 1, 0x1c080c08);
+		out_le32(qspi_lut + 2, 0x00002400);
+		/* Lock the lut table */
+		out_le32(qspi_key, 0x5af05af0);
+		out_le32(qspi_key + 1, 0x00000001);
+	}
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
@@ -382,6 +421,9 @@ int board_late_init(void)
 #ifdef CONFIG_CHAIN_OF_TRUST
 	fsl_setenv_chain_of_trust();
 #endif
+#ifdef CONFIG_QSPI_AHB_INIT
+	qspi_ahb_init();
+#endif
 
 	return 0;
 }

arch/arm/dts/ls1021a.dtsi

@@ -176,6 +176,7 @@
 			#size-cells = <0>;
 			reg = <0x1550000 0x10000>,
 				<0x40000000 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
 			num-cs = <2>;
 			big-endian;
 			status = "disabled";

arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h

@@ -18,6 +18,7 @@
 #define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
 #define CONFIG_SYS_GIC400_ADDR			(CONFIG_SYS_IMMR + 0x00400000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
+#define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x00550000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
 #define CONFIG_SYS_FSL_CSU_ADDR			(CONFIG_SYS_IMMR + 0x00510000)
 #define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00ee0000)

arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h

@@ -19,6 +19,7 @@
 #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR	(CONFIG_SYS_IMMR + 0x00300000)
 #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR	(CONFIG_SYS_IMMR + 0x00310000)
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
+#define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x010c0000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x01140000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
 #define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011C0500)

arch/powerpc/cpu/mpc85xx/cpu_init.c

@@ -45,7 +45,9 @@
 #include <nand.h>
 #include <errno.h>
 #endif
-
+#ifndef CONFIG_ARCH_QEMU_E500
+#include <fsl_ddr.h>
+#endif
 #include "../../../../drivers/block/fsl_sata.h"
 #ifdef CONFIG_U_QE
 #include <fsl_qe.h>
@@ -947,6 +949,10 @@ int cpu_init_r(void)
 
 #endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+	erratum_a009942_check_cpo();
+#endif
+
 #ifdef CONFIG_FMAN_ENET
 	fman_enet_init();
 #endif

arch/powerpc/include/asm/config_mpc85xx.h

@@ -512,7 +512,6 @@
 #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_A004468
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_FSL_ERRATUM_A006379
 #define CONFIG_SYS_FSL_ERRATUM_A007186
@@ -549,7 +548,6 @@
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_FSL_ERRATUM_A006379
 #define CONFIG_SYS_FSL_ERRATUM_A007186

board/freescale/ls1021aqds/ls1021aqds.c

@@ -22,7 +22,7 @@
 #include <spl.h>
 #include <fsl_devdis.h>
 #include <fsl_validate.h>
-
+#include <fsl_ddr.h>
 #include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
@@ -433,7 +433,9 @@ int board_init(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_A010315
 	erratum_a010315();
 #endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+	erratum_a009942_check_cpo();
+#endif
 	major = get_soc_major_rev();
 	if (major == SOC_MAJOR_VER_1_0) {
 		/* Set CCI-400 control override register to

configs/ls1012afrdm_qspi_defconfig

@@ -34,3 +34,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

configs/ls1012aqds_qspi_defconfig

@@ -38,3 +38,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

configs/ls1012ardb_qspi_defconfig

@@ -38,3 +38,4 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y

configs/ls1046ardb_qspi_defconfig

@@ -24,3 +24,4 @@ CONFIG_SPI_FLASH=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
+CONFIG_QSPI_AHB_INIT=y

drivers/ddr/fsl/ctrl_regs.c

@@ -5,14 +5,14 @@
  */
 
 /*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Generic driver for Freescale DDR/DDR2/DDR3/DDR4 memory controller.
  * Based on code from spd_sdram.c
  * Author: James Yang [at freescale.com]
  */
 
 #include <common.h>
 #include <fsl_ddr_sdram.h>
-
+#include <fsl_errata.h>
 #include <fsl_ddr.h>
 #include <fsl_immap.h>
 #include <asm/io.h>
@@ -2306,6 +2306,38 @@ compute_fsl_memctl_config_regs(const unsigned int ctrl_num,
 	unsigned int ip_rev = 0;
 	unsigned int unq_mrs_en = 0;
 	int cs_en = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+	unsigned int ddr_freq;
+#endif
+#if (defined(CONFIG_SYS_FSL_ERRATUM_A008378) && \
+	defined(CONFIG_SYS_FSL_DDRC_GEN4)) || \
+	defined(CONFIG_SYS_FSL_ERRATUM_A009942)
+	struct ccsr_ddr __iomem *ddrc;
+
+	switch (ctrl_num) {
+	case 0:
+		ddrc = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+		break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	case 1:
+		ddrc = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+	case 2:
+		ddrc = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+	case 3:
+		ddrc = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+		break;
+#endif
+	default:
+		printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
+		return 1;
+	}
+#endif
 
 	memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
 
@@ -2526,5 +2558,105 @@ compute_fsl_memctl_config_regs(const unsigned int ctrl_num,
 		ddr->debug[2] |= 0x00000200;	/* set bit 22 */
 #endif
 
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008378) && defined(CONFIG_SYS_FSL_DDRC_GEN4)
+	/* Erratum applies when accumulated ECC is used, or DBI is enabled */
+#define IS_ACC_ECC_EN(v) ((v) & 0x4)
+#define IS_DBI(v) ((((v) >> 12) & 0x3) == 0x2)
+	if (has_erratum_a008378()) {
+		if (IS_ACC_ECC_EN(ddr->ddr_sdram_cfg) ||
+		    IS_DBI(ddr->ddr_sdram_cfg_3)) {
+			ddr->debug[28] = ddr_in32(&ddrc->debug[28]);
+			ddr->debug[28] |= (0x9 << 20);
+		}
+	}
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+	ddr->debug[28] |= ddr_in32(&ddrc->debug[28]);
+	ddr->debug[28] &= 0xff0fff00;
+	if (ddr_freq <= 1333)
+		ddr->debug[28] |= 0x0080006a;
+	else if (ddr_freq <= 1600)
+		ddr->debug[28] |= 0x0070006f;
+	else if (ddr_freq <= 1867)
+		ddr->debug[28] |= 0x00700076;
+	else if (ddr_freq <= 2133)
+		ddr->debug[28] |= 0x0060007b;
+	if (popts->cpo_sample)
+		ddr->debug[28] = (ddr->debug[28] & 0xffffff00) |
+				  popts->cpo_sample;
+#endif
+
 	return check_fsl_memctl_config_regs(ddr);
 }
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+/*
+ * This additional workaround of A009942 checks the condition to determine if
+ * the CPO value set by the existing A009942 workaround needs to be updated.
+ * If need, print a warning to prompt user reconfigure DDR debug_29[24:31] with
+ * expected optimal value, the optimal value is highly board dependent.
+ */
+void erratum_a009942_check_cpo(void)
+{
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
+	u32 cpo, cpo_e, cpo_o, cpo_target, cpo_optimal;
+	u32 cpo_min = ddr_in32(&ddr->debug[9]) >> 24;
+	u32 cpo_max = cpo_min;
+	u32 sdram_cfg, i, tmp, lanes, ddr_type;
+	bool update_cpo = false, has_ecc = false;
+
+	sdram_cfg = ddr_in32(&ddr->sdram_cfg);
+	if (sdram_cfg & SDRAM_CFG_32_BE)
+		lanes = 4;
+	else if (sdram_cfg & SDRAM_CFG_16_BE)
+		lanes = 2;
+	else
+		lanes = 8;
+
+	if (sdram_cfg & SDRAM_CFG_ECC_EN)
+		has_ecc = true;
+
+	/* determine the maximum and minimum CPO values */
+	for (i = 9; i < 9 + lanes / 2; i++) {
+		cpo = ddr_in32(&ddr->debug[i]);
+		cpo_e = cpo >> 24;
+		cpo_o = (cpo >> 8) & 0xff;
+		tmp = min(cpo_e, cpo_o);
+		if (tmp < cpo_min)
+			cpo_min = tmp;
+		tmp = max(cpo_e, cpo_o);
+		if (tmp > cpo_max)
+			cpo_max = tmp;
+	}
+
+	if (has_ecc) {
+		cpo = ddr_in32(&ddr->debug[13]);
+		cpo = cpo >> 24;
+		if (cpo < cpo_min)
+			cpo_min = cpo;
+		if (cpo > cpo_max)
+			cpo_max = cpo;
+	}
+
+	cpo_target = ddr_in32(&ddr->debug[28]) & 0xff;
+	cpo_optimal = ((cpo_max + cpo_min) >> 1) + 0x27;
+	debug("cpo_optimal = 0x%x, cpo_target = 0x%x\n", cpo_optimal,
+	      cpo_target);
+	debug("cpo_max = 0x%x, cpo_min = 0x%x\n", cpo_max, cpo_min);
+
+	ddr_type = (sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
+		    SDRAM_CFG_SDRAM_TYPE_SHIFT;
+	if (ddr_type == SDRAM_TYPE_DDR4)
+		update_cpo = (cpo_min + 0x3b) < cpo_target ? true : false;
+	else if (ddr_type == SDRAM_TYPE_DDR3)
+		update_cpo = (cpo_min + 0x3f) < cpo_target ? true : false;
+
+	if (update_cpo) {
+		printf("WARN: pls set popts->cpo_sample = 0x%x ", cpo_optimal);
+		printf("in <board>/ddr.c to optimize cpo\n");
+	}
+}
+#endif

drivers/ddr/fsl/fsl_ddr_gen4.c

@@ -47,13 +47,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 {
 	unsigned int i, bus_width;
 	struct ccsr_ddr __iomem *ddr;
-	u32 temp_sdram_cfg;
+	u32 temp32;
 	u32 total_gb_size_per_controller;
 	int timeout;
-#if defined(CONFIG_SYS_FSL_ERRATUM_A008511) || \
-	defined(CONFIG_SYS_FSL_ERRATUM_A009801)
-	u32 temp32;
-#endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 	u32 mr6;
@@ -61,11 +57,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	u32 vref_seq2[3] = {0xc0, 0xf0, 0x70};	/* for range 2 */
 	u32 *vref_seq = vref_seq1;
 #endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) | \
-	defined(CONFIG_SYS_FSL_ERRATUM_A010165)
-	ulong ddr_freq;
-	u32 tmp;
-#endif
 #ifdef CONFIG_FSL_DDR_BIST
 	u32 mtcr, err_detect, err_sbe;
 	u32 cs0_bnds, cs1_bnds, cs2_bnds, cs3_bnds, cs0_config;
@@ -73,7 +64,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 #ifdef CONFIG_FSL_DDR_BIST
 	char buffer[CONFIG_SYS_CBSIZE];
 #endif
-
 	switch (ctrl_num) {
 	case 0:
 		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
@@ -230,16 +220,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			ddr_out32(&ddr->debug[i], regs->debug[i]);
 		}
 	}
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008378
-	/* Erratum applies when accumulated ECC is used, or DBI is enabled */
-#define IS_ACC_ECC_EN(v) ((v) & 0x4)
-#define IS_DBI(v) ((((v) >> 12) & 0x3) == 0x2)
-	if (has_erratum_a008378()) {
-		if (IS_ACC_ECC_EN(regs->ddr_sdram_cfg) ||
-		    IS_DBI(regs->ddr_sdram_cfg_3))
-			ddr_setbits32(&ddr->debug[28], 0x9 << 20);
-	}
-#endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 	/* Part 1 of 2 */
@@ -277,24 +257,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	ddr_out32(&ddr->debug[25], temp32);
 #endif
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
-	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
-	tmp = ddr_in32(&ddr->debug[28]);
-	if (ddr_freq <= 1333)
-		ddr_out32(&ddr->debug[28], tmp | 0x0080006a);
-	else if (ddr_freq <= 1600)
-		ddr_out32(&ddr->debug[28], tmp | 0x0070006f);
-	else if (ddr_freq <= 1867)
-		ddr_out32(&ddr->debug[28], tmp | 0x00700076);
-	else if (ddr_freq <= 2133)
-		ddr_out32(&ddr->debug[28], tmp | 0x0060007b);
-#endif
-
 #ifdef CONFIG_SYS_FSL_ERRATUM_A010165
-	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
-	if ((ddr_freq > 1900) && (ddr_freq < 2300)) {
-		tmp = ddr_in32(&ddr->debug[28]);
-		ddr_out32(&ddr->debug[28], tmp | 0x000a0000);
+	temp32 = get_ddr_freq(ctrl_num) / 1000000;
+	if ((temp32 > 1900) && (temp32 < 2300)) {
+		temp32 = ddr_in32(&ddr->debug[28]);
+		ddr_out32(&ddr->debug[28], temp32 | 0x000a0000);
 	}
 #endif
 	/*
@@ -312,9 +279,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 step2:
 	/* Set, but do not enable the memory */
-	temp_sdram_cfg = regs->ddr_sdram_cfg;
-	temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
-	ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg);
+	temp32 = regs->ddr_sdram_cfg;
+	temp32 &= ~(SDRAM_CFG_MEM_EN);
+	ddr_out32(&ddr->sdram_cfg, temp32);
 
 	/*
 	 * 500 painful micro-seconds must elapse between
@@ -329,18 +296,18 @@ step2:
 #ifdef CONFIG_DEEP_SLEEP
 	if (is_warm_boot()) {
 		/* enter self-refresh */
-		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-		temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
-		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+		temp32 = ddr_in32(&ddr->sdram_cfg_2);
+		temp32 |= SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp32);
 		/* do board specific memory setup */
 		board_mem_sleep_setup();
 
-		temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+		temp32 = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
 	} else
 #endif
-		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+		temp32 = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
 	/* Let the controller go */
-	ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+	ddr_out32(&ddr->sdram_cfg, temp32 | SDRAM_CFG_MEM_EN);
 	mb();
 	isb();
 
@@ -483,9 +450,9 @@ step2:
 #ifdef CONFIG_DEEP_SLEEP
 	if (is_warm_boot()) {
 		/* exit self-refresh */
-		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-		temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
-		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+		temp32 = ddr_in32(&ddr->sdram_cfg_2);
+		temp32 &= ~SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp32);
 	}
 #endif
 

drivers/ddr/fsl/mpc85xx_ddr_gen3.c

@@ -174,9 +174,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			out_be32(&ddr->debug[i], regs->debug[i]);
 		}
 	}
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
-	out_be32(&ddr->debug[28], 0x30003000);
-#endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 	out_be32(&ddr->debug[12], 0x00000015);

drivers/usb/common/fsl-errata.c

@@ -139,6 +139,10 @@ bool has_erratum_a005697(void)
 	case SVR_9132:
 		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
 #endif
+#ifdef ONFIG_ARM64
+	case SVR_LS1012A:
+		return IS_SVR_REV(svr, 1, 0);
+#endif
 	}
 	return false;
 }

include/fsl_ddr.h

@@ -138,4 +138,6 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 void update_spd_address(unsigned int ctrl_num,
 			unsigned int slot,
 			unsigned int *addr);
+
+void erratum_a009942_check_cpo(void);
 #endif

include/fsl_ddr_sdram.h

@@ -374,7 +374,8 @@ typedef struct memctl_options_s {
 	unsigned int additive_latency_override_value;
 
 	unsigned int clk_adjust;		/* */
-	unsigned int cpo_override;
+	unsigned int cpo_override;		/* override timing_cfg_2[CPO]*/
+	unsigned int cpo_sample;		/* optimize debug_29[24:31] */
 	unsigned int write_data_delay;		/* DQS adjust */
 
 	unsigned int cswl_override;