imx6: engicam: Use bootm instead of bootz

Boot Linux with uImage instead of zImage, so update
bootz with bootm.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

configs/imx6dl_icore_mmc_defconfig

@@ -16,7 +16,6 @@ CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/imx6dl_icore_nand_defconfig

@@ -15,7 +15,6 @@ CONFIG_SPL=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_NAND=y

configs/imx6dl_icore_rqs_mmc_defconfig

@@ -15,7 +15,6 @@ CONFIG_DEFAULT_FDT_FILE="imx6dl-icore-rqs.dtb"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/imx6q_icore_mmc_defconfig

@@ -16,7 +16,6 @@ CONFIG_DEFAULT_FDT_FILE="imx6q-icore.dtb"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/imx6q_icore_nand_defconfig

@@ -15,7 +15,6 @@ CONFIG_SPL=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_NAND=y

configs/imx6q_icore_rqs_mmc_defconfig

@@ -15,7 +15,6 @@ CONFIG_DEFAULT_FDT_FILE="imx6q-icore-rqs.dtb"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/imx6ul_geam_mmc_defconfig

@@ -15,7 +15,6 @@ CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="geam6ul> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MMC=y

configs/imx6ul_geam_nand_defconfig

@@ -14,7 +14,6 @@ CONFIG_SPL=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="geam6ul> "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_NAND=y

include/configs/imx6qdl_icore.h

@@ -38,7 +38,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"splashpos=m,m\0" \
-	"image=zImage\0" \
+	"image=uImage\0" \
 	"console=ttymxc3\0" \
 	"fdt_high=0xffffffff\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
@@ -60,16 +60,16 @@
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
+					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootz; " \
+			"bootm; " \
 		"fi\0"
 
 #define CONFIG_BOOTCOMMAND \

include/configs/imx6qdl_icore_rqs.h

@@ -33,7 +33,7 @@
 /* Default environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"image=zImage\0" \
+	"image=uImage\0" \
 	"console=ttymxc3\0" \
 	"fdt_high=0xffffffff\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
@@ -55,16 +55,16 @@
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
+					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootz; " \
+			"bootm; " \
 		"fi\0"
 
 #define CONFIG_BOOTCOMMAND \

include/configs/imx6ul_geam.h

@@ -37,7 +37,7 @@
 /* Default environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"image=zImage\0" \
+	"image=uImage\0" \
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
@@ -59,16 +59,16 @@
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
+					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootz; " \
+			"bootm; " \
 		"fi\0"
 
 #define CONFIG_BOOTCOMMAND \