I reorganized my config files, putting the common stuff into netstal-common.h (got the idea by looking a amcc-common.h from Stefan). Added stuff to boot the new powerpc linux via NFS (only tested with HCU4). Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> Signed-off-by: Stefan Roese <sr@denx.de>master
Niklaus Giger
17 years ago
committed by
Stefan Roese
parent
c9c11d751e
commit
c11da19454
@ -0,0 +1,255 @@ |
||||
/*
|
||||
* (C) Copyright 2008 |
||||
* Niklaus Giger, Netstal Maschinen AG, niklaus.giger@netstal.com |
||||
* adapted from amcc-common.h by |
||||
* (C) Copyright 2008 |
||||
* * Stefan Roese, DENX Software Engineering, sr@denx.de. |
||||
* |
||||
* Common configuration options for all Netstal boards |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef __NETSTAL_COMMON_H |
||||
#define __NETSTAL_COMMON_H |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ |
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */ |
||||
#define CONFIG_SYS_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */ |
||||
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ |
||||
|
||||
/*
|
||||
* UART |
||||
*/ |
||||
#define CONFIG_SERIAL_MULTI |
||||
#define CONFIG_SYS_BAUDRATE_TABLE \ |
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
||||
|
||||
/*
|
||||
* I2C |
||||
*/ |
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ |
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F |
||||
|
||||
/* This is the 7bit address of the device, not including P. */ |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
||||
|
||||
/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 |
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 |
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 |
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE |
||||
|
||||
/*
|
||||
* Ethernet/EMAC/PHY |
||||
*/ |
||||
#define CONFIG_MII /* MII PHY management */ |
||||
#define CONFIG_PHY_ADDR 1 /* PHY address */ |
||||
#if defined(CONFIG_440) |
||||
#define CONFIG_NET_MULTI 1 |
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */ |
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */ |
||||
#else |
||||
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */ |
||||
#endif |
||||
#define CONFIG_HAS_ETH0 |
||||
|
||||
/*
|
||||
* Commands |
||||
*/ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_ASKENV |
||||
#if defined(CONFIG_440) |
||||
#define CONFIG_CMD_CACHE |
||||
#endif |
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_DIAG |
||||
#define CONFIG_CMD_EEPROM |
||||
#define CONFIG_CMD_ELF |
||||
#define CONFIG_CMD_I2C |
||||
#define CONFIG_CMD_IRQ |
||||
#define CONFIG_CMD_MII |
||||
#define CONFIG_CMD_NET |
||||
#define CONFIG_CMD_NFS |
||||
#define CONFIG_CMD_PING |
||||
#define CONFIG_CMD_REGINFO |
||||
#define CONFIG_BOOT_RETRY_TIME 30 |
||||
#define CONFIG_RESET_TO_RETRY |
||||
/*
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ |
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#else |
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
||||
#endif |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
||||
#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */ |
||||
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
||||
|
||||
#define CONFIG_CMDLINE_EDITING /* add command line history */ |
||||
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
||||
#define CONFIG_LOOPW /* enable loopw command */ |
||||
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ |
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
||||
#define CONFIG_VERSION_VARIABLE /* include version env variable */ |
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ |
||||
|
||||
#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ |
||||
#ifdef CONFIG_SYS_HUSH_PARSER |
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
||||
#endif |
||||
|
||||
#define CONFIG_LOADS_ECHO /* echo on for serial download */ |
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
||||
|
||||
/*
|
||||
* BOOTP options |
||||
*/ |
||||
#define CONFIG_BOOTP_BOOTFILESIZE |
||||
#define CONFIG_BOOTP_BOOTPATH |
||||
#define CONFIG_BOOTP_GATEWAY |
||||
#define CONFIG_BOOTP_HOSTNAME |
||||
#define CONFIG_BOOTP_SUBNETMASK |
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data |
||||
* have to be in the first 8 MB of memory, since this is |
||||
* the maximum mapped by the Linux kernel during initialization. |
||||
*/ |
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
||||
|
||||
/*
|
||||
* Internal Definitions |
||||
*/ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ |
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
||||
#endif |
||||
|
||||
/*
|
||||
* Pass open firmware flat tree |
||||
*/ |
||||
#define CONFIG_OF_LIBFDT |
||||
#define CONFIG_OF_BOARD_SETUP |
||||
|
||||
/*
|
||||
* Booting and default environment |
||||
*/ |
||||
#define CONFIG_PREBOOT "echo;" \ |
||||
"echo Type \"run net_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo" |
||||
#define CONFIG_BOOTCOMMAND "run vx" |
||||
|
||||
/*
|
||||
* Only very few boards have default console not on ttyS0 (like Taishan) |
||||
*/ |
||||
#if !defined(CONFIG_USE_TTY) |
||||
#define CONFIG_USE_TTY ttyS0 |
||||
#endif |
||||
|
||||
/*
|
||||
* Only some 4xx PPC's are equipped with an FPU |
||||
*/ |
||||
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ |
||||
defined(CONFIG_460EX) || defined(CONFIG_460GT) |
||||
#define CONFIG_NETSTAL_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" |
||||
#else |
||||
#define CONFIG_NETSTAL_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" |
||||
#endif |
||||
|
||||
/*
|
||||
* Only some boards need to extend the bootargs by some additional |
||||
* parameters (like Makalu) |
||||
*/ |
||||
#if !defined(CONFIG_ADDMISC) |
||||
#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0" |
||||
#endif |
||||
|
||||
#define xstr(s) str(s) |
||||
#define str(s) #s |
||||
|
||||
/* Setup some values for the default environment variables */ |
||||
#define CONFIG_SERVERIP 172.25.1.1 |
||||
#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ |
||||
#define CONFIG_OVERWRITE_ETHADDR_ONCE |
||||
|
||||
#define CONFIG_SYS_TFTP_LOADADDR 0x01000000 |
||||
|
||||
/*
|
||||
* General common environment variables shared by all boards produced by Netstal Maschinen |
||||
*/ |
||||
#define CONFIG_NETSTAL_DEF_ENV \ |
||||
"netdev=eth0\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs}" \
|
||||
" console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0" \
|
||||
CONFIG_ADDMISC \
|
||||
"initrd_high=30000000\0" \
|
||||
"kernel_addr_r=400000\0" \
|
||||
"fdt_addr_r=800000\0" \
|
||||
"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
|
||||
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
|
||||
"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
||||
"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
|
||||
"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
|
||||
"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
|
||||
"setenv filesize\0" \
|
||||
"upd=run load update\0" \
|
||||
"vx_rom=" xstr(CONFIG_HOSTNAME) "/" \
|
||||
xstr(CONFIG_HOSTNAME) "_vx_rom\0" \
|
||||
"vx=tftp " xstr(CONFIG_SYS_TFTP_LOADADDR) " ${vx_rom};run vxargs;" \
|
||||
"bootvx\0" \
|
||||
"vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \
|
||||
" h=${serverip} u=dpu pw=netstal8752 " \
|
||||
"tn=" xstr(CONFIG_HOSTNAME) " f=0x3008\0" \
|
||||
CONFIG_NETSTAL_DEF_ENV_ROOTPATH |
||||
|
||||
/*
|
||||
* Default environment for arch/powerpc booting |
||||
* for boards that are ported to arch/powerpc |
||||
*/ |
||||
#define CONFIG_NETSTAL_DEF_ENV_POWERPC \ |
||||
"flash_self=run ramargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
||||
"flash_nfs=run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
||||
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
||||
"tftp ${fdt_addr_r} ${fdt_file}; " \
|
||||
"run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" |
||||
|
||||
#endif /* __NETSTAL_COMMON_H */ |
||||
Loading…
Reference in new issue