Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Patch by Yuli Barcohen, 14 Aug 2003:

Browse Source 
add support for bzip2 uncompression
master
wdenk 22 years ago
parent ca75added1
commit c29fdfc1d8
12 changed files with 3688 additions and 5 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      CHANGELOG
  2. 13
      README
  3. 24
      common/cmd_bootm.c
  4. 5
      examples/Makefile
  5. 330
      include/bzlib.h
  6. 5
      lib_generic/Makefile
  7. 1597
      lib_generic/bzlib.c
  8. 148
      lib_generic/bzlib_crctable.c
  9. 664
      lib_generic/bzlib_decompress.c
  10. 232
      lib_generic/bzlib_huffman.c
  11. 541
      lib_generic/bzlib_private.h
  12. 128
      lib_generic/bzlib_randtable.c

6
CHANGELOG
Unescape View File

@ -2,6 +2,12 @@
Changes for U-Boot 0.4.7:
======================================================================
* Patch by Yuli Barcohen, 14 Aug 2003:
add support for bzip2 uncompression
* Add GCC library to examples/Makefile so GCC utility functions will
be resolved, too
* Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command

13
README
Unescape View File

@ -859,6 +859,16 @@ The following options need to be configured:
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
- Compression support:
CONFIG_BZIP2
If this option is set, support for bzip2 compressed
images is included. If not, only uncompressed and gzip
compressed images are supported.
NOTE: the bzip2 algorithm requires a lot of RAM, so
the malloc area (as defined by CFG_MALLOC_LEN) should
be at least 4MB.
- Ethernet address:
CONFIG_ETHADDR
@ -2263,8 +2273,7 @@ defines the following image properties:
* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: PowerPC).
* Compression Type (Provisions for uncompressed, gzip, bzip2;
Currently supported: uncompressed, gzip).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
* Image Name

24
common/cmd_bootm.c
Unescape View File

@ -30,6 +30,7 @@
#include <image.h>
#include <malloc.h>
#include <zlib.h>
#include <bzlib.h>
#include <environment.h>
#include <asm/byteorder.h>
@ -142,6 +143,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ulong addr;
ulong data, len, checksum;
ulong *len_ptr;
uint unc_len = 0x400000;
int i, verify;
char *name, *s;
int (*appl)(cmd_tbl_t *, int, int, char *[]);
@ -307,13 +309,26 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", name);
if (gunzip ((void *)ntohl(hdr->ih_load), 0x400000,
if (gunzip ((void *)ntohl(hdr->ih_load), unc_len,
(uchar *)data, (int *)&len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
SHOW_BOOT_PROGRESS (-6);
do_reset (cmdtp, flag, argc, argv);
}
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", name);
i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
&unc_len, (char *)data, len, 0, 0);
if (i != BZ_OK) {
printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
SHOW_BOOT_PROGRESS (-6);
udelay(100000);
do_reset (cmdtp, flag, argc, argv);
}
break;
#endif /* CONFIG_BZIP2 */
default:
if (iflag)
enable_interrupts();
@ -1206,6 +1221,13 @@ int gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
return (0);
}
#ifdef CONFIG_BZIP2
void bz_internal_error(int errcode)
{
printf ("BZIP2 internal error %d\n", errcode);
}
#endif /* CONFIG_BZIP2 */
static void
do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong *len_ptr, int verify)

5
examples/Makefile
Unescape View File

@ -79,6 +79,8 @@ endif
LIBCOBJS= stubs.o
LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
CPPFLAGS += -I..
all: .depend $(LIB) $(SREC) $(BIN)
@ -88,7 +90,8 @@ $(LIB): .depend $(LIBOBJS)
$(AR) crv $@ $(LIBOBJS)
%.srec: %.o $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB) \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
%.bin: %.srec

330
include/bzlib.h
Unescape View File

@ -0,0 +1,330 @@
/*
* This file is a modified version of bzlib.h from the bzip2-1.0.2
* distribution which can be found at http://sources.redhat.com/bzip2/
*/
/*-------------------------------------------------------------*/
/*--- Public header file for the library. ---*/
/*--- bzlib.h ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#ifndef _BZLIB_H
#define _BZLIB_H
/* Configure for U-Boot environment */
#define BZ_NO_STDIO
#define BZ_NO_COMPRESS
/* End of configuration for U-Boot environment */
#ifdef __cplusplus
extern "C" {
#endif
#define BZ_RUN 0
#define BZ_FLUSH 1
#define BZ_FINISH 2
#define BZ_OK 0
#define BZ_RUN_OK 1
#define BZ_FLUSH_OK 2
#define BZ_FINISH_OK 3
#define BZ_STREAM_END 4
#define BZ_SEQUENCE_ERROR (-1)
#define BZ_PARAM_ERROR (-2)
#define BZ_MEM_ERROR (-3)
#define BZ_DATA_ERROR (-4)
#define BZ_DATA_ERROR_MAGIC (-5)
#define BZ_IO_ERROR (-6)
#define BZ_UNEXPECTED_EOF (-7)
#define BZ_OUTBUFF_FULL (-8)
#define BZ_CONFIG_ERROR (-9)
typedef
struct {
char *next_in;
unsigned int avail_in;
unsigned int total_in_lo32;
unsigned int total_in_hi32;
char *next_out;
unsigned int avail_out;
unsigned int total_out_lo32;
unsigned int total_out_hi32;
void *state;
void *(*bzalloc)(void *,int,int);
void (*bzfree)(void *,void *);
void *opaque;
}
bz_stream;
#ifndef BZ_IMPORT
#define BZ_EXPORT
#endif
#ifdef _WIN32
# include <windows.h>
# ifdef small
/* windows.h define small to char */
# undef small
# endif
# ifdef BZ_EXPORT
# define BZ_API(func) WINAPI func
# define BZ_EXTERN extern
# else
/* import windows dll dynamically */
# define BZ_API(func) (WINAPI * func)
# define BZ_EXTERN
# endif
#else
# define BZ_API(func) func
# define BZ_EXTERN extern
#endif
/*-- Core (low-level) library functions --*/
BZ_EXTERN int BZ_API(BZ2_bzCompressInit) (
bz_stream* strm,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN int BZ_API(BZ2_bzCompress) (
bz_stream* strm,
int action
);
BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) (
bz_stream* strm
);
BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) (
bz_stream *strm,
int verbosity,
int small
);
BZ_EXTERN int BZ_API(BZ2_bzDecompress) (
bz_stream* strm
);
BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) (
bz_stream *strm
);
/*-- High(er) level library functions --*/
#ifndef BZ_NO_STDIO
#define BZ_MAX_UNUSED 5000
/* Need a definitition for FILE */
#include <stdio.h>
typedef void BZFILE;
BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) (
int* bzerror,
FILE* f,
int verbosity,
int small,
void* unused,
int nUnused
);
BZ_EXTERN void BZ_API(BZ2_bzReadClose) (
int* bzerror,
BZFILE* b
);
BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) (
int* bzerror,
BZFILE* b,
void** unused,
int* nUnused
);
BZ_EXTERN int BZ_API(BZ2_bzRead) (
int* bzerror,
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) (
int* bzerror,
FILE* f,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN void BZ_API(BZ2_bzWrite) (
int* bzerror,
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN void BZ_API(BZ2_bzWriteClose) (
int* bzerror,
BZFILE* b,
int abandon,
unsigned int* nbytes_in,
unsigned int* nbytes_out
);
BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) (
int* bzerror,
BZFILE* b,
int abandon,
unsigned int* nbytes_in_lo32,
unsigned int* nbytes_in_hi32,
unsigned int* nbytes_out_lo32,
unsigned int* nbytes_out_hi32
);
#endif
/*-- Utility functions --*/
BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) (
char* dest,
unsigned int* destLen,
char* source,
unsigned int sourceLen,
int blockSize100k,
int verbosity,
int workFactor
);
BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) (
char* dest,
unsigned int* destLen,
char* source,
unsigned int sourceLen,
int small,
int verbosity
);
/*--
Code contributed by Yoshioka Tsuneo
(QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
to support better zlib compatibility.
This code is not _officially_ part of libbzip2 (yet);
I haven't tested it, documented it, or considered the
threading-safeness of it.
If this code breaks, please contact both Yoshioka and me.
--*/
BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
void
);
#ifndef BZ_NO_STDIO
BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
const char *path,
const char *mode
);
BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
int fd,
const char *mode
);
BZ_EXTERN int BZ_API(BZ2_bzread) (
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN int BZ_API(BZ2_bzwrite) (
BZFILE* b,
void* buf,
int len
);
BZ_EXTERN int BZ_API(BZ2_bzflush) (
BZFILE* b
);
BZ_EXTERN void BZ_API(BZ2_bzclose) (
BZFILE* b
);
BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
BZFILE *b,
int *errnum
);
#endif
#ifdef __cplusplus
}
#endif
#endif
/*-------------------------------------------------------------*/
/*--- end bzlib.h ---*/
/*-------------------------------------------------------------*/

5
lib_generic/Makefile
Unescape View File

@ -25,7 +25,10 @@ include $(TOPDIR)/config.mk
LIB = libgeneric.a
OBJS = crc32.o ctype.o display_options.o ldiv.o string.o vsprintf.o zlib.o
OBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
crc32.o ctype.o display_options.o ldiv.o \
string.o vsprintf.o zlib.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)

1597
lib_generic/bzlib.c
View File

File diff suppressed because it is too large Load Diff

148
lib_generic/bzlib_crctable.c
Unescape View File

@ -0,0 +1,148 @@
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Table for doing CRCs ---*/
/*--- crctable.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#include "bzlib_private.h"
/*--
I think this is an implementation of the AUTODIN-II,
Ethernet & FDDI 32-bit CRC standard. Vaguely derived
from code by Rob Warnock, in Section 51 of the
comp.compression FAQ.
--*/
UInt32 BZ2_crc32Table[256] = {
/*-- Ugly, innit? --*/
0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
};
/*-------------------------------------------------------------*/
/*--- end crctable.c ---*/
/*-------------------------------------------------------------*/
#endif /* CONFIG_BZIP2 */

664
lib_generic/bzlib_decompress.c
Unescape View File

@ -0,0 +1,664 @@
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Decompression machinery ---*/
/*--- decompress.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#include "bzlib_private.h"
/*---------------------------------------------------*/
static
void makeMaps_d ( DState* s )
{
Int32 i;
s->nInUse = 0;
for (i = 0; i < 256; i++)
if (s->inUse[i]) {
s->seqToUnseq[s->nInUse] = i;
s->nInUse++;
}
}
/*---------------------------------------------------*/
#define RETURN(rrr) \
{ retVal = rrr; goto save_state_and_return; };
#define GET_BITS(lll,vvv,nnn) \
case lll: s->state = lll; \
while (True) { \
if (s->bsLive >= nnn) { \
UInt32 v; \
v = (s->bsBuff >> \
(s->bsLive-nnn)) & ((1 << nnn)-1); \
s->bsLive -= nnn; \
vvv = v; \
break; \
} \
if (s->strm->avail_in == 0) RETURN(BZ_OK); \
s->bsBuff \
= (s->bsBuff << 8) | \
((UInt32) \
(*((UChar*)(s->strm->next_in)))); \
s->bsLive += 8; \
s->strm->next_in++; \
s->strm->avail_in--; \
s->strm->total_in_lo32++; \
if (s->strm->total_in_lo32 == 0) \
s->strm->total_in_hi32++; \
}
#define GET_UCHAR(lll,uuu) \
GET_BITS(lll,uuu,8)
#define GET_BIT(lll,uuu) \
GET_BITS(lll,uuu,1)
/*---------------------------------------------------*/
#define GET_MTF_VAL(label1,label2,lval) \
{ \
if (groupPos == 0) { \
groupNo++; \
if (groupNo >= nSelectors) \
RETURN(BZ_DATA_ERROR); \
groupPos = BZ_G_SIZE; \
gSel = s->selector[groupNo]; \
gMinlen = s->minLens[gSel]; \
gLimit = &(s->limit[gSel][0]); \
gPerm = &(s->perm[gSel][0]); \
gBase = &(s->base[gSel][0]); \
} \
groupPos--; \
zn = gMinlen; \
GET_BITS(label1, zvec, zn); \
while (1) { \
if (zn > 20 /* the longest code */) \
RETURN(BZ_DATA_ERROR); \
if (zvec <= gLimit[zn]) break; \
zn++; \
GET_BIT(label2, zj); \
zvec = (zvec << 1) | zj; \
}; \
if (zvec - gBase[zn] < 0 \
|| zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE) \
RETURN(BZ_DATA_ERROR); \
lval = gPerm[zvec - gBase[zn]]; \
}
/*---------------------------------------------------*/
Int32 BZ2_decompress ( DState* s )
{
UChar uc;
Int32 retVal;
Int32 minLen, maxLen;
bz_stream* strm = s->strm;
/* stuff that needs to be saved/restored */
Int32 i;
Int32 j;
Int32 t;
Int32 alphaSize;
Int32 nGroups;
Int32 nSelectors;
Int32 EOB;
Int32 groupNo;
Int32 groupPos;
Int32 nextSym;
Int32 nblockMAX;
Int32 nblock;
Int32 es;
Int32 N;
Int32 curr;
Int32 zt;
Int32 zn;
Int32 zvec;
Int32 zj;
Int32 gSel;
Int32 gMinlen;
Int32* gLimit;
Int32* gBase;
Int32* gPerm;
if (s->state == BZ_X_MAGIC_1) {
/*initialise the save area*/
s->save_i = 0;
s->save_j = 0;
s->save_t = 0;
s->save_alphaSize = 0;
s->save_nGroups = 0;
s->save_nSelectors = 0;
s->save_EOB = 0;
s->save_groupNo = 0;
s->save_groupPos = 0;
s->save_nextSym = 0;
s->save_nblockMAX = 0;
s->save_nblock = 0;
s->save_es = 0;
s->save_N = 0;
s->save_curr = 0;
s->save_zt = 0;
s->save_zn = 0;
s->save_zvec = 0;
s->save_zj = 0;
s->save_gSel = 0;
s->save_gMinlen = 0;
s->save_gLimit = NULL;
s->save_gBase = NULL;
s->save_gPerm = NULL;
}
/*restore from the save area*/
i = s->save_i;
j = s->save_j;
t = s->save_t;
alphaSize = s->save_alphaSize;
nGroups = s->save_nGroups;
nSelectors = s->save_nSelectors;
EOB = s->save_EOB;
groupNo = s->save_groupNo;
groupPos = s->save_groupPos;
nextSym = s->save_nextSym;
nblockMAX = s->save_nblockMAX;
nblock = s->save_nblock;
es = s->save_es;
N = s->save_N;
curr = s->save_curr;
zt = s->save_zt;
zn = s->save_zn;
zvec = s->save_zvec;
zj = s->save_zj;
gSel = s->save_gSel;
gMinlen = s->save_gMinlen;
gLimit = s->save_gLimit;
gBase = s->save_gBase;
gPerm = s->save_gPerm;
retVal = BZ_OK;
switch (s->state) {
GET_UCHAR(BZ_X_MAGIC_1, uc);
if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC);
GET_UCHAR(BZ_X_MAGIC_2, uc);
if (uc != BZ_HDR_Z) RETURN(BZ_DATA_ERROR_MAGIC);
GET_UCHAR(BZ_X_MAGIC_3, uc)
if (uc != BZ_HDR_h) RETURN(BZ_DATA_ERROR_MAGIC);
GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
if (s->blockSize100k < (BZ_HDR_0 + 1) ||
s->blockSize100k > (BZ_HDR_0 + 9)) RETURN(BZ_DATA_ERROR_MAGIC);
s->blockSize100k -= BZ_HDR_0;
if (s->smallDecompress) {
s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
s->ll4 = BZALLOC(
((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar)
);
if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
} else {
s->tt = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
}
GET_UCHAR(BZ_X_BLKHDR_1, uc);
if (uc == 0x17) goto endhdr_2;
if (uc != 0x31) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_BLKHDR_2, uc);
if (uc != 0x41) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_BLKHDR_3, uc);
if (uc != 0x59) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_BLKHDR_4, uc);
if (uc != 0x26) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_BLKHDR_5, uc);
if (uc != 0x53) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_BLKHDR_6, uc);
if (uc != 0x59) RETURN(BZ_DATA_ERROR);
s->currBlockNo++;
if (s->verbosity >= 2)
VPrintf1 ( "\n [%d: huff+mtf ", s->currBlockNo );
s->storedBlockCRC = 0;
GET_UCHAR(BZ_X_BCRC_1, uc);
s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_BCRC_2, uc);
s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_BCRC_3, uc);
s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_BCRC_4, uc);
s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
s->origPtr = 0;
GET_UCHAR(BZ_X_ORIGPTR_1, uc);
s->origPtr = (s->origPtr << 8) | ((Int32)uc);
GET_UCHAR(BZ_X_ORIGPTR_2, uc);
s->origPtr = (s->origPtr << 8) | ((Int32)uc);
GET_UCHAR(BZ_X_ORIGPTR_3, uc);
s->origPtr = (s->origPtr << 8) | ((Int32)uc);
if (s->origPtr < 0)
RETURN(BZ_DATA_ERROR);
if (s->origPtr > 10 + 100000*s->blockSize100k)
RETURN(BZ_DATA_ERROR);
/*--- Receive the mapping table ---*/
for (i = 0; i < 16; i++) {
GET_BIT(BZ_X_MAPPING_1, uc);
if (uc == 1)
s->inUse16[i] = True; else
s->inUse16[i] = False;
}
for (i = 0; i < 256; i++) s->inUse[i] = False;
for (i = 0; i < 16; i++)
if (s->inUse16[i])
for (j = 0; j < 16; j++) {
GET_BIT(BZ_X_MAPPING_2, uc);
if (uc == 1) s->inUse[i * 16 + j] = True;
}
makeMaps_d ( s );
if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
alphaSize = s->nInUse+2;
/*--- Now the selectors ---*/
GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
for (i = 0; i < nSelectors; i++) {
j = 0;
while (True) {
GET_BIT(BZ_X_SELECTOR_3, uc);
if (uc == 0) break;
j++;
if (j >= nGroups) RETURN(BZ_DATA_ERROR);
}
s->selectorMtf[i] = j;
}
/*--- Undo the MTF values for the selectors. ---*/
{
UChar pos[BZ_N_GROUPS], tmp, v;
for (v = 0; v < nGroups; v++) pos[v] = v;
for (i = 0; i < nSelectors; i++) {
v = s->selectorMtf[i];
tmp = pos[v];
while (v > 0) { pos[v] = pos[v-1]; v--; }
pos[0] = tmp;
s->selector[i] = tmp;
}
}
/*--- Now the coding tables ---*/
for (t = 0; t < nGroups; t++) {
GET_BITS(BZ_X_CODING_1, curr, 5);
for (i = 0; i < alphaSize; i++) {
while (True) {
if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
GET_BIT(BZ_X_CODING_2, uc);
if (uc == 0) break;
GET_BIT(BZ_X_CODING_3, uc);
if (uc == 0) curr++; else curr--;
}
s->len[t][i] = curr;
}
}
/*--- Create the Huffman decoding tables ---*/
for (t = 0; t < nGroups; t++) {
minLen = 32;
maxLen = 0;
for (i = 0; i < alphaSize; i++) {
if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
if (s->len[t][i] < minLen) minLen = s->len[t][i];
}
BZ2_hbCreateDecodeTables (
&(s->limit[t][0]),
&(s->base[t][0]),
&(s->perm[t][0]),
&(s->len[t][0]),
minLen, maxLen, alphaSize
);
s->minLens[t] = minLen;
}
/*--- Now the MTF values ---*/
EOB = s->nInUse+1;
nblockMAX = 100000 * s->blockSize100k;
groupNo = -1;
groupPos = 0;
for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
/*-- MTF init --*/
{
Int32 ii, jj, kk;
kk = MTFA_SIZE-1;
for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
kk--;
}
s->mtfbase[ii] = kk + 1;
}
}
/*-- end MTF init --*/
nblock = 0;
GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
while (True) {
if (nextSym == EOB) break;
if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
es = -1;
N = 1;
do {
if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
if (nextSym == BZ_RUNB) es = es + (1+1) * N;
N = N * 2;
GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
}
while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
es++;
uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
s->unzftab[uc] += es;
if (s->smallDecompress)
while (es > 0) {
if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
s->ll16[nblock] = (UInt16)uc;
nblock++;
es--;
}
else
while (es > 0) {
if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
s->tt[nblock] = (UInt32)uc;
nblock++;
es--;
};
continue;
} else {
if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
/*-- uc = MTF ( nextSym-1 ) --*/
{
Int32 ii, jj, kk, pp, lno, off;
UInt32 nn;
nn = (UInt32)(nextSym - 1);
if (nn < MTFL_SIZE) {
/* avoid general-case expense */
pp = s->mtfbase[0];
uc = s->mtfa[pp+nn];
while (nn > 3) {
Int32 z = pp+nn;
s->mtfa[(z) ] = s->mtfa[(z)-1];
s->mtfa[(z)-1] = s->mtfa[(z)-2];
s->mtfa[(z)-2] = s->mtfa[(z)-3];
s->mtfa[(z)-3] = s->mtfa[(z)-4];
nn -= 4;
}
while (nn > 0) {
s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--;
};
s->mtfa[pp] = uc;
} else {
/* general case */
lno = nn / MTFL_SIZE;
off = nn % MTFL_SIZE;
pp = s->mtfbase[lno] + off;
uc = s->mtfa[pp];
while (pp > s->mtfbase[lno]) {
s->mtfa[pp] = s->mtfa[pp-1]; pp--;
};
s->mtfbase[lno]++;
while (lno > 0) {
s->mtfbase[lno]--;
s->mtfa[s->mtfbase[lno]]
= s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
lno--;
}
s->mtfbase[0]--;
s->mtfa[s->mtfbase[0]] = uc;
if (s->mtfbase[0] == 0) {
kk = MTFA_SIZE-1;
for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
kk--;
}
s->mtfbase[ii] = kk + 1;
}
}
}
}
/*-- end uc = MTF ( nextSym-1 ) --*/
s->unzftab[s->seqToUnseq[uc]]++;
if (s->smallDecompress)
s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
s->tt[nblock] = (UInt32)(s->seqToUnseq[uc]);
nblock++;
GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
continue;
}
}
/* Now we know what nblock is, we can do a better sanity
check on s->origPtr.
*/
if (s->origPtr < 0 || s->origPtr >= nblock)
RETURN(BZ_DATA_ERROR);
s->state_out_len = 0;
s->state_out_ch = 0;
BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
s->state = BZ_X_OUTPUT;
if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
/*-- Set up cftab to facilitate generation of T^(-1) --*/
s->cftab[0] = 0;
for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
if (s->smallDecompress) {
/*-- Make a copy of cftab, used in generation of T --*/
for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
/*-- compute the T vector --*/
for (i = 0; i < nblock; i++) {
uc = (UChar)(s->ll16[i]);
SET_LL(i, s->cftabCopy[uc]);
s->cftabCopy[uc]++;
}
/*-- Compute T^(-1) by pointer reversal on T --*/
i = s->origPtr;
j = GET_LL(i);
do {
Int32 tmp = GET_LL(j);
SET_LL(j, i);
i = j;
j = tmp;
}
while (i != s->origPtr);
s->tPos = s->origPtr;
s->nblock_used = 0;
if (s->blockRandomised) {
BZ_RAND_INIT_MASK;
BZ_GET_SMALL(s->k0); s->nblock_used++;
BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
} else {
BZ_GET_SMALL(s->k0); s->nblock_used++;
}
} else {
/*-- compute the T^(-1) vector --*/
for (i = 0; i < nblock; i++) {
uc = (UChar)(s->tt[i] & 0xff);
s->tt[s->cftab[uc]] |= (i << 8);
s->cftab[uc]++;
}
s->tPos = s->tt[s->origPtr] >> 8;
s->nblock_used = 0;
if (s->blockRandomised) {
BZ_RAND_INIT_MASK;
BZ_GET_FAST(s->k0); s->nblock_used++;
BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
} else {
BZ_GET_FAST(s->k0); s->nblock_used++;
}
}
RETURN(BZ_OK);
endhdr_2:
GET_UCHAR(BZ_X_ENDHDR_2, uc);
if (uc != 0x72) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_ENDHDR_3, uc);
if (uc != 0x45) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_ENDHDR_4, uc);
if (uc != 0x38) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_ENDHDR_5, uc);
if (uc != 0x50) RETURN(BZ_DATA_ERROR);
GET_UCHAR(BZ_X_ENDHDR_6, uc);
if (uc != 0x90) RETURN(BZ_DATA_ERROR);
s->storedCombinedCRC = 0;
GET_UCHAR(BZ_X_CCRC_1, uc);
s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_CCRC_2, uc);
s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_CCRC_3, uc);
s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
GET_UCHAR(BZ_X_CCRC_4, uc);
s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
s->state = BZ_X_IDLE;
RETURN(BZ_STREAM_END);
default: AssertH ( False, 4001 );
}
AssertH ( False, 4002 );
save_state_and_return:
s->save_i = i;
s->save_j = j;
s->save_t = t;
s->save_alphaSize = alphaSize;
s->save_nGroups = nGroups;
s->save_nSelectors = nSelectors;
s->save_EOB = EOB;
s->save_groupNo = groupNo;
s->save_groupPos = groupPos;
s->save_nextSym = nextSym;
s->save_nblockMAX = nblockMAX;
s->save_nblock = nblock;
s->save_es = es;
s->save_N = N;
s->save_curr = curr;
s->save_zt = zt;
s->save_zn = zn;
s->save_zvec = zvec;
s->save_zj = zj;
s->save_gSel = gSel;
s->save_gMinlen = gMinlen;
s->save_gLimit = gLimit;
s->save_gBase = gBase;
s->save_gPerm = gPerm;
return retVal;
}
/*-------------------------------------------------------------*/
/*--- end decompress.c ---*/
/*-------------------------------------------------------------*/
#endif /* CONFIG_BZIP2 */

232
lib_generic/bzlib_huffman.c
Unescape View File

@ -0,0 +1,232 @@
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Huffman coding low-level stuff ---*/
/*--- huffman.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#include "bzlib_private.h"
/*---------------------------------------------------*/
#define WEIGHTOF(zz0) ((zz0) & 0xffffff00)
#define DEPTHOF(zz1) ((zz1) & 0x000000ff)
#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
#define ADDWEIGHTS(zw1,zw2) \
(WEIGHTOF(zw1)+WEIGHTOF(zw2)) | \
(1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
#define UPHEAP(z) \
{ \
Int32 zz, tmp; \
zz = z; tmp = heap[zz]; \
while (weight[tmp] < weight[heap[zz >> 1]]) { \
heap[zz] = heap[zz >> 1]; \
zz >>= 1; \
} \
heap[zz] = tmp; \
}
#define DOWNHEAP(z) \
{ \
Int32 zz, yy, tmp; \
zz = z; tmp = heap[zz]; \
while (True) { \
yy = zz << 1; \
if (yy > nHeap) break; \
if (yy < nHeap && \
weight[heap[yy+1]] < weight[heap[yy]]) \
yy++; \
if (weight[tmp] < weight[heap[yy]]) break; \
heap[zz] = heap[yy]; \
zz = yy; \
} \
heap[zz] = tmp; \
}
/*---------------------------------------------------*/
void BZ2_hbMakeCodeLengths ( UChar *len,
Int32 *freq,
Int32 alphaSize,
Int32 maxLen )
{
/*--
Nodes and heap entries run from 1. Entry 0
for both the heap and nodes is a sentinel.
--*/
Int32 nNodes, nHeap, n1, n2, i, j, k;
Bool tooLong;
Int32 heap [ BZ_MAX_ALPHA_SIZE + 2 ];
Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ];
for (i = 0; i < alphaSize; i++)
weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
while (True) {
nNodes = alphaSize;
nHeap = 0;
heap[0] = 0;
weight[0] = 0;
parent[0] = -2;
for (i = 1; i <= alphaSize; i++) {
parent[i] = -1;
nHeap++;
heap[nHeap] = i;
UPHEAP(nHeap);
}
AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
while (nHeap > 1) {
n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
nNodes++;
parent[n1] = parent[n2] = nNodes;
weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
parent[nNodes] = -1;
nHeap++;
heap[nHeap] = nNodes;
UPHEAP(nHeap);
}
AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
tooLong = False;
for (i = 1; i <= alphaSize; i++) {
j = 0;
k = i;
while (parent[k] >= 0) { k = parent[k]; j++; }
len[i-1] = j;
if (j > maxLen) tooLong = True;
}
if (! tooLong) break;
for (i = 1; i < alphaSize; i++) {
j = weight[i] >> 8;
j = 1 + (j / 2);
weight[i] = j << 8;
}
}
}
/*---------------------------------------------------*/
void BZ2_hbAssignCodes ( Int32 *code,
UChar *length,
Int32 minLen,
Int32 maxLen,
Int32 alphaSize )
{
Int32 n, vec, i;
vec = 0;
for (n = minLen; n <= maxLen; n++) {
for (i = 0; i < alphaSize; i++)
if (length[i] == n) { code[i] = vec; vec++; };
vec <<= 1;
}
}
/*---------------------------------------------------*/
void BZ2_hbCreateDecodeTables ( Int32 *limit,
Int32 *base,
Int32 *perm,
UChar *length,
Int32 minLen,
Int32 maxLen,
Int32 alphaSize )
{
Int32 pp, i, j, vec;
pp = 0;
for (i = minLen; i <= maxLen; i++)
for (j = 0; j < alphaSize; j++)
if (length[j] == i) { perm[pp] = j; pp++; };
for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
vec = 0;
for (i = minLen; i <= maxLen; i++) {
vec += (base[i+1] - base[i]);
limit[i] = vec-1;
vec <<= 1;
}
for (i = minLen + 1; i <= maxLen; i++)
base[i] = ((limit[i-1] + 1) << 1) - base[i];
}
/*-------------------------------------------------------------*/
/*--- end huffman.c ---*/
/*-------------------------------------------------------------*/
#endif /* CONFIG_BZIP2 */

541
lib_generic/bzlib_private.h
Unescape View File

@ -0,0 +1,541 @@
/*
* This file is a modified version of bzlib_private.h from the bzip2-1.0.2
* distribution which can be found at http://sources.redhat.com/bzip2/
*/
/*-------------------------------------------------------------*/
/*--- Private header file for the library. ---*/
/*--- bzlib_private.h ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#ifndef _BZLIB_PRIVATE_H
#define _BZLIB_PRIVATE_H
#include <malloc.h>
#include "bzlib.h"
#ifndef BZ_NO_STDIO
#include <stdio.h>
#include <ctype.h>
#include <string.h>
#endif
/*-- General stuff. --*/
#define BZ_VERSION "1.0.2, 30-Dec-2001"
typedef char Char;
typedef unsigned char Bool;
typedef unsigned char UChar;
typedef int Int32;
typedef unsigned int UInt32;
typedef short Int16;
typedef unsigned short UInt16;
#define True ((Bool)1)
#define False ((Bool)0)
#ifndef __GNUC__
#define __inline__ /* */
#endif
#ifndef BZ_NO_STDIO
extern void BZ2_bz__AssertH__fail ( int errcode );
#define AssertH(cond,errcode) \
{ if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
#if BZ_DEBUG
#define AssertD(cond,msg) \
{ if (!(cond)) { \
fprintf ( stderr, \
"\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
exit(1); \
}}
#else
#define AssertD(cond,msg) /* */
#endif
#define VPrintf0(zf) \
fprintf(stderr,zf)
#define VPrintf1(zf,za1) \
fprintf(stderr,zf,za1)
#define VPrintf2(zf,za1,za2) \
fprintf(stderr,zf,za1,za2)
#define VPrintf3(zf,za1,za2,za3) \
fprintf(stderr,zf,za1,za2,za3)
#define VPrintf4(zf,za1,za2,za3,za4) \
fprintf(stderr,zf,za1,za2,za3,za4)
#define VPrintf5(zf,za1,za2,za3,za4,za5) \
fprintf(stderr,zf,za1,za2,za3,za4,za5)
#else
extern void bz_internal_error ( int errcode );
#define AssertH(cond,errcode) \
{ if (!(cond)) bz_internal_error ( errcode ); }
#define AssertD(cond,msg) /* */
#define VPrintf0(zf) /* */
#define VPrintf1(zf,za1) /* */
#define VPrintf2(zf,za1,za2) /* */
#define VPrintf3(zf,za1,za2,za3) /* */
#define VPrintf4(zf,za1,za2,za3,za4) /* */
#define VPrintf5(zf,za1,za2,za3,za4,za5) /* */
#endif
#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
#define BZFREE(ppp) (strm->bzfree)(strm->opaque,(ppp))
/*-- Header bytes. --*/
#define BZ_HDR_B 0x42 /* 'B' */
#define BZ_HDR_Z 0x5a /* 'Z' */
#define BZ_HDR_h 0x68 /* 'h' */
#define BZ_HDR_0 0x30 /* '0' */
/*-- Constants for the back end. --*/
#define BZ_MAX_ALPHA_SIZE 258
#define BZ_MAX_CODE_LEN 23
#define BZ_RUNA 0
#define BZ_RUNB 1
#define BZ_N_GROUPS 6
#define BZ_G_SIZE 50
#define BZ_N_ITERS 4
#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
/*-- Stuff for randomising repetitive blocks. --*/
extern Int32 BZ2_rNums[512];
#define BZ_RAND_DECLS \
Int32 rNToGo; \
Int32 rTPos \
#define BZ_RAND_INIT_MASK \
s->rNToGo = 0; \
s->rTPos = 0 \
#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
#define BZ_RAND_UPD_MASK \
if (s->rNToGo == 0) { \
s->rNToGo = BZ2_rNums[s->rTPos]; \
s->rTPos++; \
if (s->rTPos == 512) s->rTPos = 0; \
} \
s->rNToGo--;
/*-- Stuff for doing CRCs. --*/
extern UInt32 BZ2_crc32Table[256];
#define BZ_INITIALISE_CRC(crcVar) \
{ \
crcVar = 0xffffffffL; \
}
#define BZ_FINALISE_CRC(crcVar) \
{ \
crcVar = ~(crcVar); \
}
#define BZ_UPDATE_CRC(crcVar,cha) \
{ \
crcVar = (crcVar << 8) ^ \
BZ2_crc32Table[(crcVar >> 24) ^ \
((UChar)cha)]; \
}
/*-- States and modes for compression. --*/
#define BZ_M_IDLE 1
#define BZ_M_RUNNING 2
#define BZ_M_FLUSHING 3
#define BZ_M_FINISHING 4
#define BZ_S_OUTPUT 1
#define BZ_S_INPUT 2
#define BZ_N_RADIX 2
#define BZ_N_QSORT 12
#define BZ_N_SHELL 18
#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
/*-- Structure holding all the compression-side stuff. --*/
typedef
struct {
/* pointer back to the struct bz_stream */
bz_stream* strm;
/* mode this stream is in, and whether inputting */
/* or outputting data */
Int32 mode;
Int32 state;
/* remembers avail_in when flush/finish requested */
UInt32 avail_in_expect;
/* for doing the block sorting */
UInt32* arr1;
UInt32* arr2;
UInt32* ftab;
Int32 origPtr;
/* aliases for arr1 and arr2 */
UInt32* ptr;
UChar* block;
UInt16* mtfv;
UChar* zbits;
/* for deciding when to use the fallback sorting algorithm */
Int32 workFactor;
/* run-length-encoding of the input */
UInt32 state_in_ch;
Int32 state_in_len;
BZ_RAND_DECLS;
/* input and output limits and current posns */
Int32 nblock;
Int32 nblockMAX;
Int32 numZ;
Int32 state_out_pos;
/* map of bytes used in block */
Int32 nInUse;
Bool inUse[256];
UChar unseqToSeq[256];
/* the buffer for bit stream creation */
UInt32 bsBuff;
Int32 bsLive;
/* block and combined CRCs */
UInt32 blockCRC;
UInt32 combinedCRC;
/* misc administratium */
Int32 verbosity;
Int32 blockNo;
Int32 blockSize100k;
/* stuff for coding the MTF values */
Int32 nMTF;
Int32 mtfFreq [BZ_MAX_ALPHA_SIZE];
UChar selector [BZ_MAX_SELECTORS];
UChar selectorMtf[BZ_MAX_SELECTORS];
UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 code [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 rfreq [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
/* second dimension: only 3 needed; 4 makes index calculations faster */
UInt32 len_pack[BZ_MAX_ALPHA_SIZE][4];
}
EState;
/*-- externs for compression. --*/
extern void
BZ2_blockSort ( EState* );
extern void
BZ2_compressBlock ( EState*, Bool );
extern void
BZ2_bsInitWrite ( EState* );
extern void
BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );
extern void
BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );
/*-- states for decompression. --*/
#define BZ_X_IDLE 1
#define BZ_X_OUTPUT 2
#define BZ_X_MAGIC_1 10
#define BZ_X_MAGIC_2 11
#define BZ_X_MAGIC_3 12
#define BZ_X_MAGIC_4 13
#define BZ_X_BLKHDR_1 14
#define BZ_X_BLKHDR_2 15
#define BZ_X_BLKHDR_3 16
#define BZ_X_BLKHDR_4 17
#define BZ_X_BLKHDR_5 18
#define BZ_X_BLKHDR_6 19
#define BZ_X_BCRC_1 20
#define BZ_X_BCRC_2 21
#define BZ_X_BCRC_3 22
#define BZ_X_BCRC_4 23
#define BZ_X_RANDBIT 24
#define BZ_X_ORIGPTR_1 25
#define BZ_X_ORIGPTR_2 26
#define BZ_X_ORIGPTR_3 27
#define BZ_X_MAPPING_1 28
#define BZ_X_MAPPING_2 29
#define BZ_X_SELECTOR_1 30
#define BZ_X_SELECTOR_2 31
#define BZ_X_SELECTOR_3 32
#define BZ_X_CODING_1 33
#define BZ_X_CODING_2 34
#define BZ_X_CODING_3 35
#define BZ_X_MTF_1 36
#define BZ_X_MTF_2 37
#define BZ_X_MTF_3 38
#define BZ_X_MTF_4 39
#define BZ_X_MTF_5 40
#define BZ_X_MTF_6 41
#define BZ_X_ENDHDR_2 42
#define BZ_X_ENDHDR_3 43
#define BZ_X_ENDHDR_4 44
#define BZ_X_ENDHDR_5 45
#define BZ_X_ENDHDR_6 46
#define BZ_X_CCRC_1 47
#define BZ_X_CCRC_2 48
#define BZ_X_CCRC_3 49
#define BZ_X_CCRC_4 50
/*-- Constants for the fast MTF decoder. --*/
#define MTFA_SIZE 4096
#define MTFL_SIZE 16
/*-- Structure holding all the decompression-side stuff. --*/
typedef
struct {
/* pointer back to the struct bz_stream */
bz_stream* strm;
/* state indicator for this stream */
Int32 state;
/* for doing the final run-length decoding */
UChar state_out_ch;
Int32 state_out_len;
Bool blockRandomised;
BZ_RAND_DECLS;
/* the buffer for bit stream reading */
UInt32 bsBuff;
Int32 bsLive;
/* misc administratium */
Int32 blockSize100k;
Bool smallDecompress;
Int32 currBlockNo;
Int32 verbosity;
/* for undoing the Burrows-Wheeler transform */
Int32 origPtr;
UInt32 tPos;
Int32 k0;
Int32 unzftab[256];
Int32 nblock_used;
Int32 cftab[257];
Int32 cftabCopy[257];
/* for undoing the Burrows-Wheeler transform (FAST) */
UInt32 *tt;
/* for undoing the Burrows-Wheeler transform (SMALL) */
UInt16 *ll16;
UChar *ll4;
/* stored and calculated CRCs */
UInt32 storedBlockCRC;
UInt32 storedCombinedCRC;
UInt32 calculatedBlockCRC;
UInt32 calculatedCombinedCRC;
/* map of bytes used in block */
Int32 nInUse;
Bool inUse[256];
Bool inUse16[16];
UChar seqToUnseq[256];
/* for decoding the MTF values */
UChar mtfa [MTFA_SIZE];
Int32 mtfbase[256 / MTFL_SIZE];
UChar selector [BZ_MAX_SELECTORS];
UChar selectorMtf[BZ_MAX_SELECTORS];
UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 limit [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 base [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 perm [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
Int32 minLens[BZ_N_GROUPS];
/* save area for scalars in the main decompress code */
Int32 save_i;
Int32 save_j;
Int32 save_t;
Int32 save_alphaSize;
Int32 save_nGroups;
Int32 save_nSelectors;
Int32 save_EOB;
Int32 save_groupNo;
Int32 save_groupPos;
Int32 save_nextSym;
Int32 save_nblockMAX;
Int32 save_nblock;
Int32 save_es;
Int32 save_N;
Int32 save_curr;
Int32 save_zt;
Int32 save_zn;
Int32 save_zvec;
Int32 save_zj;
Int32 save_gSel;
Int32 save_gMinlen;
Int32* save_gLimit;
Int32* save_gBase;
Int32* save_gPerm;
}
DState;
/*-- Macros for decompression. --*/
#define BZ_GET_FAST(cccc) \
s->tPos = s->tt[s->tPos]; \
cccc = (UChar)(s->tPos & 0xff); \
s->tPos >>= 8;
#define BZ_GET_FAST_C(cccc) \
c_tPos = c_tt[c_tPos]; \
cccc = (UChar)(c_tPos & 0xff); \
c_tPos >>= 8;
#define SET_LL4(i,n) \
{ if (((i) & 0x1) == 0) \
s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else \
s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4); \
}
#define GET_LL4(i) \
((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)
#define SET_LL(i,n) \
{ s->ll16[i] = (UInt16)(n & 0x0000ffff); \
SET_LL4(i, n >> 16); \
}
#define GET_LL(i) \
(((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))
#define BZ_GET_SMALL(cccc) \
cccc = BZ2_indexIntoF ( s->tPos, s->cftab ); \
s->tPos = GET_LL(s->tPos);
/*-- externs for decompression. --*/
extern Int32
BZ2_indexIntoF ( Int32, Int32* );
extern Int32
BZ2_decompress ( DState* );
extern void
BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
Int32, Int32, Int32 );
#endif
/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/
#ifdef BZ_NO_STDIO
#ifndef NULL
#define NULL 0
#endif
#endif
/*-------------------------------------------------------------*/
/*--- end bzlib_private.h ---*/
/*-------------------------------------------------------------*/

128
lib_generic/bzlib_randtable.c
Unescape View File

@ -0,0 +1,128 @@
#include <config.h>
#ifdef CONFIG_BZIP2
/*-------------------------------------------------------------*/
/*--- Table for randomising repetitive blocks ---*/
/*--- randtable.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2002 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
--*/
#include "bzlib_private.h"
/*---------------------------------------------*/
Int32 BZ2_rNums[512] = {
619, 720, 127, 481, 931, 816, 813, 233, 566, 247,
985, 724, 205, 454, 863, 491, 741, 242, 949, 214,
733, 859, 335, 708, 621, 574, 73, 654, 730, 472,
419, 436, 278, 496, 867, 210, 399, 680, 480, 51,
878, 465, 811, 169, 869, 675, 611, 697, 867, 561,
862, 687, 507, 283, 482, 129, 807, 591, 733, 623,
150, 238, 59, 379, 684, 877, 625, 169, 643, 105,
170, 607, 520, 932, 727, 476, 693, 425, 174, 647,
73, 122, 335, 530, 442, 853, 695, 249, 445, 515,
909, 545, 703, 919, 874, 474, 882, 500, 594, 612,
641, 801, 220, 162, 819, 984, 589, 513, 495, 799,
161, 604, 958, 533, 221, 400, 386, 867, 600, 782,
382, 596, 414, 171, 516, 375, 682, 485, 911, 276,
98, 553, 163, 354, 666, 933, 424, 341, 533, 870,
227, 730, 475, 186, 263, 647, 537, 686, 600, 224,
469, 68, 770, 919, 190, 373, 294, 822, 808, 206,
184, 943, 795, 384, 383, 461, 404, 758, 839, 887,
715, 67, 618, 276, 204, 918, 873, 777, 604, 560,
951, 160, 578, 722, 79, 804, 96, 409, 713, 940,
652, 934, 970, 447, 318, 353, 859, 672, 112, 785,
645, 863, 803, 350, 139, 93, 354, 99, 820, 908,
609, 772, 154, 274, 580, 184, 79, 626, 630, 742,
653, 282, 762, 623, 680, 81, 927, 626, 789, 125,
411, 521, 938, 300, 821, 78, 343, 175, 128, 250,
170, 774, 972, 275, 999, 639, 495, 78, 352, 126,
857, 956, 358, 619, 580, 124, 737, 594, 701, 612,
669, 112, 134, 694, 363, 992, 809, 743, 168, 974,
944, 375, 748, 52, 600, 747, 642, 182, 862, 81,
344, 805, 988, 739, 511, 655, 814, 334, 249, 515,
897, 955, 664, 981, 649, 113, 974, 459, 893, 228,
433, 837, 553, 268, 926, 240, 102, 654, 459, 51,
686, 754, 806, 760, 493, 403, 415, 394, 687, 700,
946, 670, 656, 610, 738, 392, 760, 799, 887, 653,
978, 321, 576, 617, 626, 502, 894, 679, 243, 440,
680, 879, 194, 572, 640, 724, 926, 56, 204, 700,
707, 151, 457, 449, 797, 195, 791, 558, 945, 679,
297, 59, 87, 824, 713, 663, 412, 693, 342, 606,
134, 108, 571, 364, 631, 212, 174, 643, 304, 329,
343, 97, 430, 751, 497, 314, 983, 374, 822, 928,
140, 206, 73, 263, 980, 736, 876, 478, 430, 305,
170, 514, 364, 692, 829, 82, 855, 953, 676, 246,
369, 970, 294, 750, 807, 827, 150, 790, 288, 923,
804, 378, 215, 828, 592, 281, 565, 555, 710, 82,
896, 831, 547, 261, 524, 462, 293, 465, 502, 56,
661, 821, 976, 991, 658, 869, 905, 758, 745, 193,
768, 550, 608, 933, 378, 286, 215, 979, 792, 961,
61, 688, 793, 644, 986, 403, 106, 366, 905, 644,
372, 567, 466, 434, 645, 210, 389, 550, 919, 135,
780, 773, 635, 389, 707, 100, 626, 958, 165, 504,
920, 176, 193, 713, 857, 265, 203, 50, 668, 108,
645, 990, 626, 197, 510, 357, 358, 850, 858, 364,
936, 638
};
/*-------------------------------------------------------------*/
/*--- end randtable.c ---*/
/*-------------------------------------------------------------*/
#endif /* CONFIG_BZIP2 */
Write Preview
Loading…
Cancel
Save