ARM: don't probe PHY address for LaCie boards

The command miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr) always
returns 8 for the PHY address. It is the reset value for the PHY
Address Register. Obviously, this default value could be incorrect.
Moreover, as the PHY address is well known, there is no need to
auto-detect it.

Now, the PHY address must given as a parameter to the PHY initialization
function. Additionally this patch also fixes some aesthetic issues.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>

board/LaCie/common/common.c

@@ -20,34 +20,25 @@
 #define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
 #define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
 
-void mv_phy_88e1116_init(const char *name)
+void mv_phy_88e1116_init(const char *name, u16 phyaddr)
 {
 	u16 reg;
-	u16 devadr;
 
 	if (miiphy_set_current_dev(name))
 		return;
 
-	/* command to read PHY dev address */
-	if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
-		printf("Err..(%s) could not read PHY dev address\n", __func__);
-		return;
-	}
-
 	/*
 	 * Enable RGMII delay on Tx and Rx for CPU port
 	 * Ref: sec 4.7.2 of chip datasheet
 	 */
-	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
+	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
 	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, devadr);
+	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
+	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
 
-	printf("88E1116 Initialized on %s\n", name);
+	if (miiphy_reset(name, phyaddr) == 0)
+		printf("88E1116 Initialized on %s\n", name);
 }
 #endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */
 

board/LaCie/common/common.h

@@ -11,7 +11,7 @@
 #define _LACIE_COMMON_H
 
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
-void mv_phy_88e1116_init(const char *name);
+void mv_phy_88e1116_init(const char *name, u16 phyaddr);
 #endif
 #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
 int lacie_read_mac_address(uchar *mac);

board/LaCie/edminiv2/edminiv2.c

@@ -96,6 +96,6 @@ int board_init(void)
 /* Configure and enable MV88E1116 PHY */
 void reset_phy(void)
 {
-	mv_phy_88e1116_init("egiga0");
+	mv_phy_88e1116_init("egiga0", 8);
 }
 #endif /* CONFIG_RESET_PHY_R */

board/LaCie/net2big_v2/net2big_v2.c

@@ -109,7 +109,7 @@ int misc_init_r(void)
 /* Configure and initialize PHY */
 void reset_phy(void)
 {
-	mv_phy_88e1116_init("egiga0");
+	mv_phy_88e1116_init("egiga0", 8);
 }
 #endif
 

board/LaCie/netspace_v2/netspace_v2.c

@@ -107,7 +107,7 @@ int misc_init_r(void)
 /* Configure and initialize PHY */
 void reset_phy(void)
 {
-	mv_phy_88e1116_init("egiga0");
+	mv_phy_88e1116_init("egiga0", 8);
 }
 #endif