Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

EXYNOS: SMDK5250: Enable the pinmux setup

Browse Source 
Use the pinmux configuration function for SMDK5250.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
master
Rajeshwari Shinde 13 years ago committed by Albert ARIBAUD
parent c5e3710a18
commit c6baaa6705
1 changed files with 38 additions and 138 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 176
      board/samsung/smdk5250/smdk5250.c

176
board/samsung/smdk5250/smdk5250.c
Unescape View File

@ -26,81 +26,16 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos5_gpio_part1 *gpio1;
#ifdef CONFIG_SMC911X
static void smc9115_pre_init(void)
static int smc9115_pre_init(void)
{
u32 smc_bw_conf, smc_bc_conf;
int i;
/*
* SROM:CS1 and EBI
*
* GPY0[0] SROM_CSn[0]
* GPY0[1] SROM_CSn[1](2)
* GPY0[2] SROM_CSn[2]
* GPY0[3] SROM_CSn[3]
* GPY0[4] EBI_OEn(2)
* GPY0[5] EBI_EEn(2)
*
* GPY1[0] EBI_BEn[0](2)
* GPY1[1] EBI_BEn[1](2)
* GPY1[2] SROM_WAIT(2)
* GPY1[3] EBI_DATA_RDn(2)
*/
s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
for (i = 0; i < 4; i++)
s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
/*
* EBI: 8 Addrss Lines
*
* GPY3[0] EBI_ADDR[0](2)
* GPY3[1] EBI_ADDR[1](2)
* GPY3[2] EBI_ADDR[2](2)
* GPY3[3] EBI_ADDR[3](2)
* GPY3[4] EBI_ADDR[4](2)
* GPY3[5] EBI_ADDR[5](2)
* GPY3[6] EBI_ADDR[6](2)
* GPY3[7] EBI_ADDR[7](2)
*
* EBI: 16 Data Lines
*
* GPY5[0] EBI_DATA[0](2)
* GPY5[1] EBI_DATA[1](2)
* GPY5[2] EBI_DATA[2](2)
* GPY5[3] EBI_DATA[3](2)
* GPY5[4] EBI_DATA[4](2)
* GPY5[5] EBI_DATA[5](2)
* GPY5[6] EBI_DATA[6](2)
* GPY5[7] EBI_DATA[7](2)
*
* GPY6[0] EBI_DATA[8](2)
* GPY6[1] EBI_DATA[9](2)
* GPY6[2] EBI_DATA[10](2)
* GPY6[3] EBI_DATA[11](2)
* GPY6[4] EBI_DATA[12](2)
* GPY6[5] EBI_DATA[13](2)
* GPY6[6] EBI_DATA[14](2)
* GPY6[7] EBI_DATA[15](2)
*/
for (i = 0; i < 8; i++) {
s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
}
int err;
/* Ethernet needs data bus width of 16 bits */
smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
@ -112,14 +47,20 @@ static void smc9115_pre_init(void)
| SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */
err = exynos_pinmux_config(PERIPH_ID_SROMC,
CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
if (err) {
debug("SROMC not configured\n");
return err;
}
s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
return 0;
}
#endif
int board_init(void)
{
gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
}
@ -168,7 +109,8 @@ void dram_init_banksize(void)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SMC911X
smc9115_pre_init();
if (smc9115_pre_init())
return -1;
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return 0;
@ -186,31 +128,12 @@ int checkboard(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int i, err;
/*
* MMC2 SD card GPIO:
*
* GPC2[0] SD_2_CLK(2)
* GPC2[1] SD_2_CMD(2)
* GPC2[2] SD_2_CDn
* GPC2[3:6] SD_2_DATA[0:3](2)
*/
for (i = 0; i < 7; i++) {
/* GPC2[0:6] special function 2 */
s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
/* GPK2[0:6] drv 4x */
s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);
int err;
/* GPK2[0:1] pull disable */
if (i == 0 || i == 1) {
s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE);
continue;
}
/* GPK2[2:6] pull up */
s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
if (err) {
debug("SDMMC2 not configured\n");
return err;
}
err = s5p_mmc_init(2, 4);
@ -218,63 +141,40 @@ int board_mmc_init(bd_t *bis)
}
#endif
static void board_uart_init(void)
static int board_uart_init(void)
{
struct exynos5_gpio_part1 *gpio1 =
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
int i;
int err;
/*
* UART0 GPIOs : GPA0CON[3:0] 0x2222
* Must set CFG17 switches to select UART0 to use.
*/
for (i = 0; i <= 3; i++) {
s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
/*
* UART1 GPIOs : GPA0CON[5:4] 0x22
* Must set CFG17 switches to select UART1 to use.
*
* This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
* in order to use them (so that those pins can be used for I2C).
*/
for (i = 4; i <= 5; i++) {
s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
/*
* UART2 GPIOs : GPA1CON[1:0] 0x22
* Must set CFG17 switches to select UART2 to use.
*
* This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
* in order to use them (so that those pins can be used for I2C).
*/
for (i = 0; i <= 1; i++) {
s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
/*
* UART3 GPIOs : GPA1CON[5:4] 0x22
* Must set CFG16 switches to select UART3 to use.
*/
for (i = 4; i <= 5; i++) {
s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
/*
* There's no mux for UART4--it's internal only
*/
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
board_uart_init();
return 0;
return board_uart_init();
}
#endif

Write Preview
Loading…
Cancel
Save