Merge git://git.denx.de/u-boot-sunxi

Update A20-OLinuXino-Lime2-eMMC_defconfig to include CONFIG_SCSI

Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arm/dts/Makefile

@@ -336,6 +336,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
 	sun50i-h5-orangepi-zero-plus2.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-bananapi-m64.dtb \
+	sun50i-a64-nanopi-a64.dtb \
+	sun50i-a64-olinuxino.dtb \
 	sun50i-a64-orangepi-win.dtb \
 	sun50i-a64-pine64-plus.dtb \
 	sun50i-a64-pine64.dtb

arch/arm/dts/sun50i-a64-nanopi-a64.dts

@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi A64";
+	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "disabled";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};

arch/arm/dts/sun50i-a64-olinuxino.dts

@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A64-Olinuxino";
+	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};

arch/arm/dts/sun50i-a64.dtsi

@@ -204,6 +204,28 @@
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;

arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts

@@ -56,7 +56,7 @@
 };
 
 &pio {
-	mmc2_pins_nrst: mmc2@0 {
+	mmc2_pins_nrst: mmc2-rst-pin {
 		allwinner,pins = "PC16";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

arch/arm/include/asm/arch-sunxi/prcm.h

@@ -196,6 +196,10 @@
 #define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
 #define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
 
+#define PRCM_SEC_SWITCH_APB0_CLK_NONSEC (0x1 << 0)
+#define PRCM_SEC_SWITCH_PLL_CFG_NONSEC (0x1 << 1)
+#define PRCM_SEC_SWITCH_PWR_GATE_NONSEC (0x1 << 2)
+
 #ifndef __ASSEMBLY__
 #include <linux/compiler.h>
 
@@ -233,6 +237,8 @@ struct __packed sunxi_prcm_reg {
 	u32 dram_pwr;		/* 0x180 */
 	u8 res12[0xc];		/* 0x184 */
 	u32 dram_tst;		/* 0x190 */
+	u8 res13[0x3c];		/* 0x194 */
+	u32 prcm_sec_switch;	/* 0x1d0 */
 };
 
 void prcm_apb0_enable(u32 flags);

arch/arm/mach-sunxi/clock_sun6i.c

@@ -66,11 +66,17 @@ void clock_init_sec(void)
 #ifdef CONFIG_MACH_SUNXI_H3_H5
 	struct sunxi_ccm_reg * const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_prcm_reg * const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 
 	setbits_le32(&ccm->ccu_sec_switch,
 		     CCM_SEC_SWITCH_MBUS_NONSEC |
 		     CCM_SEC_SWITCH_BUS_NONSEC |
 		     CCM_SEC_SWITCH_PLL_NONSEC);
+	setbits_le32(&prcm->prcm_sec_switch,
+		     PRCM_SEC_SWITCH_APB0_CLK_NONSEC |
+		     PRCM_SEC_SWITCH_PLL_CFG_NONSEC |
+		     PRCM_SEC_SWITCH_PWR_GATE_NONSEC);
 #endif
 }
 

board/sunxi/MAINTAINERS

@@ -88,11 +88,21 @@ M:	Iain Paton <ipaton0@gmail.com>
 S:	Maintained
 F:	configs/A20-OLinuXino-Lime2_defconfig
 
+A20-OLINUXINO-LIME2-EMMC BOARD
+M:	Olliver Schinagl <oliver@schinagl.nl>
+S:	Maintained
+F:	configs/A20-OLinuXino-Lime2-eMMC_defconfig
+
 A33-OLINUXINO BOARD
 M:	Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
 S:	Maintained
 F:	configs/A33-OLinuXino_defconfig
 
+A64-OLINUXINO BOARD
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/a64-olinuxino_defconfig
+
 A80 OPTIMUS BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
@@ -267,6 +277,11 @@ M:	Jelle van der Waa <jelle@vdwaa.nl>
 S:	Maintained
 F:	configs/nanopi_neo_air_defconfig
 
+NANOPI-A64 BOARD
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/nanopi_a64_defconfig
+
 NINTENDO NES CLASSIC EDITION BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>
 S:	Maintained

configs/A20-OLinuXino-Lime2-eMMC_defconfig

@@ -0,0 +1,37 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB0_VBUS_PIN="PC17"
+CONFIG_USB0_VBUS_DET="PH5"
+CONFIG_I2C1_ENABLE=y
+CONFIG_SATAPWR="PC3"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_DFU_RAM=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_SCSI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/a64-olinuxino_defconfig

@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I=y
+CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y

configs/nanopi_a64_defconfig

@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I=y
+CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-nanopi-a64"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y

configs/orangepi_pc2_defconfig

@@ -4,6 +4,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=3881977
+CONFIG_MACPWR="PD6"
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y

configs/orangepi_zero_defconfig

@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=672
+CONFIG_DRAM_CLK=624
 CONFIG_DRAM_ZQ=3881979
 CONFIG_DRAM_ODT_EN=y
 # CONFIG_VIDEO_DE2 is not set