From a62790997f9a2e50a168c73e752a471590e8cf4f Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 21 Jan 2016 20:02:51 +0530
Subject: [PATCH 01/20] MIPS: initialize board_init_f() argument to zero.

Argument boot_flags of board_init_f() should be set to 0 as
$a0 may be utilized in lowlevel_init() or mips_cache_reset()
or previous stage boot-loader.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 arch/mips/cpu/start.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index e95cdca..2aa2dcb 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -185,7 +185,7 @@ reset:
 	PTR_ADDU t0, k0, GD_MALLOC_BASE	# gd->malloc_base offset
 	sw	sp, 0(t0)
 #endif
-
+	move	a0, zero		# a0 <-- boot_flags = 0
 	PTR_LA	t9, board_init_f
 	jr	t9
 	 move	ra, zero

From e26e8dc8f4da08eb0a58f14e23e78c008e6a6440 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Sat, 9 Jan 2016 22:24:47 +0100
Subject: [PATCH 02/20] MIPS: start.S: fix and optimize instructions

Fix 32 vs 64 bit load/store instructions. Access CP0_WATCHHI as
32 Bit register. Use 64 Bit register access for clearing gd_data
and copying U-Boot.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 arch/mips/cpu/start.S | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index 2aa2dcb..d2c31ae 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -115,7 +115,7 @@ reset:
 
 	/* Clear watch registers */
 	MTC0	zero, CP0_WATCHLO
-	MTC0	zero, CP0_WATCHHI
+	mtc0	zero, CP0_WATCHHI
 
 	/* WP(Watch Pending), SW0/1 should be cleared */
 	mtc0	zero, CP0_CAUSE
@@ -161,14 +161,14 @@ reset:
 #endif
 
 	/* Set up temporary stack */
-	PTR_LI	t0, -16
+	li	t0, -16
 	PTR_LI	t1, CONFIG_SYS_INIT_SP_ADDR
 	and	sp, t1, t0		# force 16 byte alignment
 	PTR_SUB	sp, sp, GD_SIZE		# reserve space for gd
 	and	sp, sp, t0		# force 16 byte alignment
 	move	k0, sp			# save gd pointer
 #ifdef CONFIG_SYS_MALLOC_F_LEN
-	PTR_LI	t2, CONFIG_SYS_MALLOC_F_LEN
+	li	t2, CONFIG_SYS_MALLOC_F_LEN
 	PTR_SUB	sp, sp, t2		# reserve space for early malloc
 	and	sp, sp, t0		# force 16 byte alignment
 #endif
@@ -177,14 +177,14 @@ reset:
 	/* Clear gd */
 	move	t0, k0
 1:
-	sw	zero, 0(t0)
+	PTR_S	zero, 0(t0)
 	blt	t0, t1, 1b
-	 PTR_ADDI t0, 4
+	 PTR_ADDI t0, PTRSIZE
 
 #ifdef CONFIG_SYS_MALLOC_F_LEN
-	PTR_ADDU t0, k0, GD_MALLOC_BASE	# gd->malloc_base offset
-	sw	sp, 0(t0)
+	PTR_S	sp, GD_MALLOC_BASE(k0)	# gd->malloc_base offset
 #endif
+
 	move	a0, zero		# a0 <-- boot_flags = 0
 	PTR_LA	t9, board_init_f
 	jr	t9
@@ -224,11 +224,11 @@ ENTRY(relocate_code)
 	 * t2 = source end address
 	 */
 1:
-	lw	t3, 0(t0)
-	sw	t3, 0(t1)
-	PTR_ADDU t0, 4
+	PTR_L	t3, 0(t0)
+	PTR_S	t3, 0(t1)
+	PTR_ADDU t0, PTRSIZE
 	blt	t0, t2, 1b
-	 PTR_ADDU t1, 4
+	 PTR_ADDU t1, PTRSIZE
 
 	/* If caches were enabled, we would have to flush them here. */
 	PTR_SUB	a1, t1, s2		# a1 <-- size

From fbb0de088b86a0f87e876531b5ae6077cc0ab14c Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Wed, 27 Jan 2016 03:13:59 +0100
Subject: [PATCH 03/20] mips: cache: Bulletproof the code against cornercases

This patch makes sure that the flush/invalidate_dcache_range() functions
can handle corner-case calls like this -- invalidate_dcache_range(0, 0, 0);
This call is valid and is happily produced by USB EHCI code for example.
The expected behavior of the cache function(s) in this case is that they
will do no operation, since the size is zero.

The current implementation though has a problem where such invocation will
result in a hard CPU hang. This is because under such conditions, where the
start_addr = 0 and stop = 0, the addr = 0 and aend = 0xffffffe0 . The loop
will then try to iterate over the entire address space, which in itself is
wrong. But iterating over the entire address space might also hit some odd
address which will cause bus hang. The later happens on the Atheros MIPS.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
---
 arch/mips/lib/cache.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c
index bf8ff59..7482005 100644
--- a/arch/mips/lib/cache.c
+++ b/arch/mips/lib/cache.c
@@ -95,6 +95,10 @@ void flush_dcache_range(ulong start_addr, ulong stop)
 	const void *addr = (const void *)(start_addr & ~(lsize - 1));
 	const void *aend = (const void *)((stop - 1) & ~(lsize - 1));
 
+	/* aend will be miscalculated when size is zero, so we return here */
+	if (start_addr == stop)
+		return;
+
 	while (1) {
 		mips_cache(HIT_WRITEBACK_INV_D, addr);
 		if (addr == aend)
@@ -109,6 +113,10 @@ void invalidate_dcache_range(ulong start_addr, ulong stop)
 	const void *addr = (const void *)(start_addr & ~(lsize - 1));
 	const void *aend = (const void *)((stop - 1) & ~(lsize - 1));
 
+	/* aend will be miscalculated when size is zero, so we return here */
+	if (start_addr == stop)
+		return;
+
 	while (1) {
 		mips_cache(HIT_INVALIDATE_D, addr);
 		if (addr == aend)

From 8ac493cd65ea2af5f9b79f7f71edf543b46da112 Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 29 Jan 2016 13:54:51 +0000
Subject: [PATCH 04/20] MIPS: Remove SLOW_DOWN_IO

CONF_SLOWDOWN_IO is never set for any target, so remove the dead code in
the SLOW_DOWN_IO macro. This is done in preparation for changes to
mips_io_port_base which can be avoided in this path by removing it
entirely.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 arch/mips/include/asm/io.h | 40 +++-------------------------------------
 1 file changed, 3 insertions(+), 37 deletions(-)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index f71e342..4f9ec19 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -26,11 +26,6 @@
 #include <spaces.h>
 
 /*
- * Slowdown I/O port space accesses for antique hardware.
- */
-#undef CONF_SLOWDOWN_IO
-
-/*
  * Raw operations are never swapped in software.  OTOH values that raw
  * operations are working on may or may not have been swapped by the bus
  * hardware.  An example use would be for flash memory that's used for
@@ -72,33 +67,6 @@ static inline void set_io_port_base(unsigned long base)
 }
 
 /*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- *
- */
-
-#define __SLOW_DOWN_IO \
-	__asm__ __volatile__( \
-		"sb\t$0,0x80(%0)" \
-		: : "r" (mips_io_port_base));
-
-#ifdef CONF_SLOWDOWN_IO
-#ifdef REALLY_SLOW_IO
-#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
-#else
-#define SLOW_DOWN_IO __SLOW_DOWN_IO
-#endif
-#else
-#define SLOW_DOWN_IO
-#endif
-
-/*
  *     virt_to_phys    -       map virtual addresses to physical
  *     @address: address to remap
  *
@@ -316,7 +284,7 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 	return pfx##ioswab##bwlq(__mem, __val);				\
 }
 
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p)			\
 									\
 static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 {									\
@@ -333,7 +301,6 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
 									\
 	*__addr = __val;						\
-	slow;								\
 }									\
 									\
 static inline type pfx##in##bwlq##p(unsigned long port)			\
@@ -346,7 +313,6 @@ static inline type pfx##in##bwlq##p(unsigned long port)			\
 	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
 									\
 	__val = *__addr;						\
-	slow;								\
 									\
 	return pfx##ioswab##bwlq(__addr, __val);			\
 }
@@ -367,8 +333,8 @@ BUILDIO_MEM(l, u32)
 BUILDIO_MEM(q, u64)
 
 #define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
-	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, )			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p)
 
 #define BUILDIO_IOPORT(bwlq, type)					\
 	__BUILD_IOPORT_PFX(, bwlq, type)				\

From 05e342554e51767830d7e60f2dab09192fd2a0e1 Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 29 Jan 2016 13:54:52 +0000
Subject: [PATCH 05/20] MIPS: Support dynamic I/O port base address

The existing mips_io_port_base variable isn't suitable for use early
during boot since it will be stored in the .data section which may not
be writable pre-relocation. Fix this by moving the I/O port base address
into struct arch_global_data. In order to avoid adding this field for
all targets, make this dependant upon a new Kconfig entry
CONFIG_DYNAMIC_IO_PORT_BASE. Malta is the only board which sets a
non-zero I/O port base, so select this option only for Malta.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 arch/mips/Kconfig                   |  4 ++++
 arch/mips/include/asm/global_data.h |  3 +++
 arch/mips/include/asm/io.h          | 48 +++++++++++++++++++++----------------
 arch/mips/lib/Makefile              |  1 -
 arch/mips/lib/io.c                  | 12 ----------
 5 files changed, 34 insertions(+), 34 deletions(-)
 delete mode 100644 arch/mips/lib/io.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1b39c4c..585887c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -23,6 +23,7 @@ config TARGET_QEMU_MIPS
 
 config TARGET_MALTA
 	bool "Support malta"
+	select DYNAMIC_IO_PORT_BASE
 	select SUPPORTS_BIG_ENDIAN
 	select SUPPORTS_LITTLE_ENDIAN
 	select SUPPORTS_CPU_MIPS32_R1
@@ -217,6 +218,9 @@ config MIPS_L1_CACHE_SHIFT
 	default "4" if MIPS_L1_CACHE_SHIFT_4
 	default "5"
 
+config DYNAMIC_IO_PORT_BASE
+	bool
+
 endif
 
 endmenu
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index 2d9a0c9..a1ca257 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -12,6 +12,9 @@
 
 /* Architecture-specific global data */
 struct arch_global_data {
+#ifdef CONFIG_DYNAMIC_IO_PORT_BASE
+	unsigned long io_port_base;
+#endif
 #ifdef CONFIG_JZSOC
 	/* There are other clocks in the jz4740 */
 	unsigned long per_clk;	/* Peripheral bus clock */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 4f9ec19..723a60a 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -41,31 +41,37 @@
 
 #define IO_SPACE_LIMIT 0xffff
 
-/*
- * On MIPS I/O ports are memory mapped, so we access them using normal
- * load/store instructions. mips_io_port_base is the virtual address to
- * which all ports are being mapped.  For sake of efficiency some code
- * assumes that this is an address that can be loaded with a single lui
- * instruction, so the lower 16 bits must be zero.  Should be true on
- * on any sane architecture; generic code does not use this assumption.
- */
-extern const unsigned long mips_io_port_base;
+#ifdef CONFIG_DYNAMIC_IO_PORT_BASE
+
+static inline ulong mips_io_port_base(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	return gd->arch.io_port_base;
+}
 
-/*
- * Gcc will generate code to load the value of mips_io_port_base after each
- * function call which may be fairly wasteful in some cases.  So we don't
- * play quite by the book.  We tell gcc mips_io_port_base is a long variable
- * which solves the code generation issue.  Now we need to violate the
- * aliasing rules a little to make initialization possible and finally we
- * will need the barrier() to fight side effects of the aliasing chat.
- * This trickery will eventually collapse under gcc's optimizer.  Oh well.
- */
 static inline void set_io_port_base(unsigned long base)
 {
-	* (unsigned long *) &mips_io_port_base = base;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->arch.io_port_base = base;
 	barrier();
 }
 
+#else /* !CONFIG_DYNAMIC_IO_PORT_BASE */
+
+static inline ulong mips_io_port_base(void)
+{
+	return 0;
+}
+
+static inline void set_io_port_base(unsigned long base)
+{
+	BUG_ON(base);
+}
+
+#endif /* !CONFIG_DYNAMIC_IO_PORT_BASE */
+
 /*
  *     virt_to_phys    -       map virtual addresses to physical
  *     @address: address to remap
@@ -293,7 +299,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 									\
 	war_octeon_io_reorder_wmb();					\
 									\
-	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base() + port); \
 									\
 	__val = pfx##ioswab##bwlq(__addr, val);				\
 									\
@@ -308,7 +314,7 @@ static inline type pfx##in##bwlq##p(unsigned long port)			\
 	volatile type *__addr;						\
 	type __val;							\
 									\
-	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base() + port); \
 									\
 	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
 									\
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index ac536da..b7ce5df 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -7,7 +7,6 @@
 
 obj-y	+= cache.o
 obj-y	+= cache_init.o
-obj-y	+= io.o
 
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 
diff --git a/arch/mips/lib/io.c b/arch/mips/lib/io.c
deleted file mode 100644
index b2d4a09..0000000
--- a/arch/mips/lib/io.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * mips_io_port_base is the begin of the address space to which x86 style
- * I/O ports are mapped.
- */
-const unsigned long mips_io_port_base = -1;

From 19a5ef60bb209f85ee2f61e99b65c321843b2316 Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 29 Jan 2016 13:54:53 +0000
Subject: [PATCH 06/20] malta: Set I/O port base early

Set the I/O port base earlier, from board_early_init_f, in preparation
for it being used by the serial driver.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 board/imgtec/malta/malta.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index cae4a21..6f4aebc 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -146,6 +146,8 @@ int board_early_init_f(void)
 		return -1;
 	}
 
+	set_io_port_base((ulong)io_base);
+
 	/* setup FDC37M817 super I/O controller */
 	malta_superio_init(io_base);
 
@@ -179,8 +181,6 @@ void pci_init_board(void)
 
 	switch (malta_sys_con()) {
 	case SYSCON_GT64120:
-		set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE));
-
 		gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
 				 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
 				 0x10000000, 0x10000000, 128 * 1024 * 1024,
@@ -189,8 +189,6 @@ void pci_init_board(void)
 
 	default:
 	case SYSCON_MSC01:
-		set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE));
-
 		msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE),
 			       0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
 			       MALTA_MSC01_PCIMEM_MAP,

From 91ec615e5474e38bbd65f36b861849e70311548b Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 29 Jan 2016 13:54:54 +0000
Subject: [PATCH 07/20] malta: Use I/O accessors for SuperI/O controller

Rather than passing the I/O port base address to the Super I/O code,
switch it to using outb such that it makes use of the I/O port base
address automatically.

Drop the extern keyword to satisfy checkpatch whilst here.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 board/imgtec/malta/malta.c   | 10 +++++-----
 board/imgtec/malta/superio.c | 10 +++++-----
 board/imgtec/malta/superio.h |  2 +-
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index 6f4aebc..e31331a 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -130,26 +130,26 @@ void _machine_restart(void)
 
 int board_early_init_f(void)
 {
-	void *io_base;
+	ulong io_base;
 
 	/* choose correct PCI I/O base */
 	switch (malta_sys_con()) {
 	case SYSCON_GT64120:
-		io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
+		io_base = CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
 		break;
 
 	case SYSCON_MSC01:
-		io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
+		io_base = CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
 		break;
 
 	default:
 		return -1;
 	}
 
-	set_io_port_base((ulong)io_base);
+	set_io_port_base(io_base);
 
 	/* setup FDC37M817 super I/O controller */
-	malta_superio_init(io_base);
+	malta_superio_init();
 
 	return 0;
 }
diff --git a/board/imgtec/malta/superio.c b/board/imgtec/malta/superio.c
index eaa14df..7865ae2 100644
--- a/board/imgtec/malta/superio.c
+++ b/board/imgtec/malta/superio.c
@@ -45,19 +45,19 @@ static struct {
 	{ SIOCONF_ACTIVATE,	0x01 },
 };
 
-void malta_superio_init(void *io_base)
+void malta_superio_init(void)
 {
 	unsigned i;
 
 	/* enter config state */
-	writeb(SIOCONF_ENTER_SETUP, io_base + SIO_CONF_PORT);
+	outb(SIOCONF_ENTER_SETUP, SIO_CONF_PORT);
 
 	/* configure peripherals */
 	for (i = 0; i < ARRAY_SIZE(sio_config); i++) {
-		writeb(sio_config[i].key, io_base + SIO_CONF_PORT);
-		writeb(sio_config[i].data, io_base + SIO_DATA_PORT);
+		outb(sio_config[i].key, SIO_CONF_PORT);
+		outb(sio_config[i].data, SIO_DATA_PORT);
 	}
 
 	/* exit config state */
-	writeb(SIOCONF_EXIT_SETUP, io_base + SIO_CONF_PORT);
+	outb(SIOCONF_EXIT_SETUP, SIO_CONF_PORT);
 }
diff --git a/board/imgtec/malta/superio.h b/board/imgtec/malta/superio.h
index 1450da5..271c462 100644
--- a/board/imgtec/malta/superio.h
+++ b/board/imgtec/malta/superio.h
@@ -10,6 +10,6 @@
 #ifndef __BOARD_MALTA_SUPERIO_H__
 #define __BOARD_MALTA_SUPERIO_H__
 
-extern void malta_superio_init(void *io_base);
+void malta_superio_init(void);
 
 #endif /* __BOARD_MALTA_SUPERIO_H__ */

From 32c1a6eef8b467bb776f989caf0480fce6218598 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:10 +0530
Subject: [PATCH 08/20] MIPS: initial infrastructure for Microchip PIC32
 architecture

Create initial directory, Kconfigs needed for PIC32 architecture
support. Also add PIC32 specific register definition required for drivers.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 arch/mips/Kconfig                         |  6 +++
 arch/mips/Makefile                        |  1 +
 arch/mips/mach-pic32/Kconfig              |  7 +++
 arch/mips/mach-pic32/Makefile             |  7 +++
 arch/mips/mach-pic32/cpu.c                | 13 ++++++
 arch/mips/mach-pic32/include/mach/pic32.h | 76 +++++++++++++++++++++++++++++++
 6 files changed, 110 insertions(+)
 create mode 100644 arch/mips/mach-pic32/Kconfig
 create mode 100644 arch/mips/mach-pic32/Makefile
 create mode 100644 arch/mips/mach-pic32/cpu.c
 create mode 100644 arch/mips/mach-pic32/include/mach/pic32.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 585887c..f852a1f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -55,6 +55,11 @@ config TARGET_PB1X00
 	select SYS_MIPS_CACHE_INIT_RAM_LOAD
 	select MIPS_TUNE_4KC
 
+config MACH_PIC32
+	bool "Support Microchip PIC32"
+	select OF_CONTROL
+	select DM
+
 endchoice
 
 source "board/dbau1x00/Kconfig"
@@ -62,6 +67,7 @@ source "board/imgtec/malta/Kconfig"
 source "board/micronas/vct/Kconfig"
 source "board/pb1x00/Kconfig"
 source "board/qemu-mips/Kconfig"
+source "arch/mips/mach-pic32/Kconfig"
 
 if MIPS
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 2133e7e..aec5a15 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -8,6 +8,7 @@ libs-y += arch/mips/cpu/
 libs-y += arch/mips/lib/
 
 machine-$(CONFIG_SOC_AU1X00) += au1x00
+machine-$(CONFIG_MACH_PIC32) += pic32
 
 machdirs := $(patsubst %,arch/mips/mach-%/,$(machine-y))
 libs-y += $(machdirs)
diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
new file mode 100644
index 0000000..c1cc5e3
--- /dev/null
+++ b/arch/mips/mach-pic32/Kconfig
@@ -0,0 +1,7 @@
+menu "Microchip PIC32 platforms"
+	depends on MACH_PIC32
+
+config SYS_SOC
+	default "none"
+
+endmenu
diff --git a/arch/mips/mach-pic32/Makefile b/arch/mips/mach-pic32/Makefile
new file mode 100644
index 0000000..cb42607
--- /dev/null
+++ b/arch/mips/mach-pic32/Makefile
@@ -0,0 +1,7 @@
+# (C) Copyright 2015
+# Purna Chandra Mandal, purna.mandal@microchip.com.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y = cpu.o
diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
new file mode 100644
index 0000000..58fd3ab
--- /dev/null
+++ b/arch/mips/mach-pic32/cpu.c
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2015
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#include <common.h>
+
+phys_size_t initdram(int board_type)
+{
+	return 0;
+}
diff --git a/arch/mips/mach-pic32/include/mach/pic32.h b/arch/mips/mach-pic32/include/mach/pic32.h
new file mode 100644
index 0000000..7e41810
--- /dev/null
+++ b/arch/mips/mach-pic32/include/mach/pic32.h
@@ -0,0 +1,76 @@
+/*
+ * (c) 2015 Paul Thacker <paul.thacker@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __PIC32_REGS_H__
+#define __PIC32_REGS_H__
+
+#include <asm/io.h>
+
+/* System Configuration */
+#define PIC32_CFG_BASE		0x1f800000
+
+/* System config register offsets */
+#define CFGCON		0x0000
+#define DEVID		0x0020
+#define SYSKEY		0x0030
+#define PMD1		0x0040
+#define PMD7		0x00a0
+#define CFGEBIA		0x00c0
+#define CFGEBIC		0x00d0
+#define CFGPG		0x00e0
+#define CFGMPLL		0x0100
+
+/* Non Volatile Memory (NOR flash) */
+#define PIC32_NVM_BASE		(PIC32_CFG_BASE + 0x0600)
+/* Oscillator Configuration */
+#define PIC32_OSC_BASE		(PIC32_CFG_BASE + 0x1200)
+/* Peripheral Pin Select Input */
+#define PPS_IN_BASE		0x1f801400
+/* Peripheral Pin Select Output */
+#define PPS_OUT_BASE		0x1f801500
+/* Pin Config */
+#define PINCTRL_BASE		0x1f860000
+
+/* USB Core */
+#define PIC32_USB_CORE_BASE	0x1f8e3000
+#define PIC32_USB_CTRL_BASE	0x1f884000
+
+/* SPI1-SPI6 */
+#define PIC32_SPI1_BASE		0x1f821000
+
+/* Prefetch Module */
+#define PREFETCH_BASE		0x1f8e0000
+
+/* DDR2 Controller */
+#define PIC32_DDR2C_BASE	0x1f8e8000
+
+/* DDR2 PHY */
+#define PIC32_DDR2P_BASE	0x1f8e9100
+
+/* EBI */
+#define PIC32_EBI_BASE		0x1f8e1000
+
+/* SQI */
+#define PIC32_SQI_BASE		0x1f8e2000
+
+struct pic32_reg_atomic {
+	u32 raw;
+	u32 clr;
+	u32 set;
+	u32 inv;
+};
+
+#define _CLR_OFFSET	0x04
+#define _SET_OFFSET	0x08
+#define _INV_OFFSET	0x0c
+
+static inline void __iomem *pic32_get_syscfg_base(void)
+{
+	return (void __iomem *)CKSEG1ADDR(PIC32_CFG_BASE);
+}
+
+#endif	/* __PIC32_REGS_H__ */

From a0e7908326b9dcde4c27dbbcbc52ccbf9e009255 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:11 +0530
Subject: [PATCH 09/20] drivers: clk: Add clock driver for Microchip PIC32
 Microcontroller.

PIC32 clock module consists of multiple oscillators, PLLs, mutiplexers
and dividers capable of supplying clock to various controllers
on or off-chip.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 .../clock/microchip,pic32-clock.txt                |  33 ++
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk_pic32.c                            | 433 +++++++++++++++++++++
 include/dt-bindings/clock/microchip,clock.h        |  29 ++
 4 files changed, 496 insertions(+)
 create mode 100644 doc/device-tree-bindings/clock/microchip,pic32-clock.txt
 create mode 100644 drivers/clk/clk_pic32.c
 create mode 100644 include/dt-bindings/clock/microchip,clock.h

diff --git a/doc/device-tree-bindings/clock/microchip,pic32-clock.txt b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
new file mode 100644
index 0000000..f185ce0
--- /dev/null
+++ b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
@@ -0,0 +1,33 @@
+* Microchip PIC32 Clock and Oscillator
+
+Microchip PIC32 clock tree consists of few oscillators, PLLs,
+multiplexers and few divider modules capable of supplying clocks
+to various controllers within SoC and also to off-chip.
+
+PIC32 clock controller output is defined by indices as defined
+in [0]
+
+[0] include/dt-bindings/clock/microchip,clock.h
+
+Required Properties:
+- compatible: should be "microchip,pic32mzda_clk"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+	clock: clk@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x1000>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+controller:
+
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0xbf822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock PB2CLK>;
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 8aa81f4..c9144e3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_CLK) += clk-uclass.o clk_fixed_rate.o
 obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
 obj-$(CONFIG_SANDBOX) += clk_sandbox.o
+obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
new file mode 100644
index 0000000..5d88354
--- /dev/null
+++ b/drivers/clk/clk_pic32.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright (C) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <div64.h>
+#include <wait_bit.h>
+#include <dm/lists.h>
+#include <asm/io.h>
+#include <mach/pic32.h>
+#include <dt-bindings/clock/microchip,clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Primary oscillator */
+#define SYS_POSC_CLK_HZ	24000000
+
+/* FRC clk rate */
+#define SYS_FRC_CLK_HZ	8000000
+
+/* Clock Registers */
+#define OSCCON		0x0000
+#define OSCTUNE		0x0010
+#define SPLLCON		0x0020
+#define REFO1CON	0x0080
+#define REFO1TRIM	0x0090
+#define PB1DIV		0x0140
+
+/* SPLL */
+#define ICLK_MASK	0x00000080
+#define PLLIDIV_MASK	0x00000007
+#define PLLODIV_MASK	0x00000007
+#define CUROSC_MASK	0x00000007
+#define PLLMUL_MASK	0x0000007F
+#define FRCDIV_MASK	0x00000007
+
+/* PBCLK */
+#define PBDIV_MASK	0x00000007
+
+/* SYSCLK MUX */
+#define SCLK_SRC_FRC1	0
+#define SCLK_SRC_SPLL	1
+#define SCLK_SRC_POSC	2
+#define SCLK_SRC_FRC2	7
+
+/* Reference Oscillator Control Reg fields */
+#define REFO_SEL_MASK	0x0f
+#define REFO_SEL_SHIFT	0
+#define REFO_ACTIVE	BIT(8)
+#define REFO_DIVSW_EN	BIT(9)
+#define REFO_OE		BIT(12)
+#define REFO_ON		BIT(15)
+#define REFO_DIV_SHIFT	16
+#define REFO_DIV_MASK	0x7fff
+
+/* Reference Oscillator Trim Register Fields */
+#define REFO_TRIM_REG	0x10
+#define REFO_TRIM_MASK	0x1ff
+#define REFO_TRIM_SHIFT	23
+#define REFO_TRIM_MAX	511
+
+#define ROCLK_SRC_SCLK		0x0
+#define ROCLK_SRC_SPLL		0x7
+#define ROCLK_SRC_ROCLKI	0x8
+
+/* Memory PLL */
+#define MPLL_IDIV		0x3f
+#define MPLL_MULT		0xff
+#define MPLL_ODIV1		0x7
+#define MPLL_ODIV2		0x7
+#define MPLL_VREG_RDY		BIT(23)
+#define MPLL_RDY		BIT(31)
+#define MPLL_IDIV_SHIFT		0
+#define MPLL_MULT_SHIFT		8
+#define MPLL_ODIV1_SHIFT	24
+#define MPLL_ODIV2_SHIFT	27
+#define MPLL_IDIV_INIT		0x03
+#define MPLL_MULT_INIT		0x32
+#define MPLL_ODIV1_INIT		0x02
+#define MPLL_ODIV2_INIT		0x01
+
+struct pic32_clk_priv {
+	void __iomem *iobase;
+	void __iomem *syscfg_base;
+};
+
+static ulong pic32_get_pll_rate(struct pic32_clk_priv *priv)
+{
+	u32 iclk, idiv, odiv, mult;
+	ulong plliclk, v;
+
+	v = readl(priv->iobase + SPLLCON);
+	iclk = (v & ICLK_MASK);
+	idiv = ((v >> 8) & PLLIDIV_MASK) + 1;
+	odiv = ((v >> 24) & PLLODIV_MASK);
+	mult = ((v >> 16) & PLLMUL_MASK) + 1;
+
+	plliclk = iclk ? SYS_FRC_CLK_HZ : SYS_POSC_CLK_HZ;
+
+	if (odiv < 2)
+		odiv = 2;
+	else if (odiv < 5)
+		odiv = (1 << odiv);
+	else
+		odiv = 32;
+
+	return ((plliclk / idiv) * mult) / odiv;
+}
+
+static ulong pic32_get_sysclk(struct pic32_clk_priv *priv)
+{
+	ulong v;
+	ulong hz;
+	ulong div, frcdiv;
+	ulong curr_osc;
+
+	/* get clk source */
+	v = readl(priv->iobase + OSCCON);
+	curr_osc = (v >> 12) & CUROSC_MASK;
+	switch (curr_osc) {
+	case SCLK_SRC_FRC1:
+	case SCLK_SRC_FRC2:
+		frcdiv = ((v >> 24) & FRCDIV_MASK);
+		div = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
+		hz = SYS_FRC_CLK_HZ / div;
+		break;
+
+	case SCLK_SRC_SPLL:
+		hz = pic32_get_pll_rate(priv);
+		break;
+
+	case SCLK_SRC_POSC:
+		hz = SYS_POSC_CLK_HZ;
+		break;
+
+	default:
+		hz = 0;
+		printf("clk: unknown sclk_src.\n");
+		break;
+	}
+
+	return hz;
+}
+
+static ulong pic32_get_pbclk(struct pic32_clk_priv *priv, int periph)
+{
+	void __iomem *reg;
+	ulong div, clk_freq;
+
+	WARN_ON((periph < PB1CLK) || (periph > PB7CLK));
+
+	clk_freq = pic32_get_sysclk(priv);
+
+	reg = priv->iobase + PB1DIV + (periph - PB1CLK) * 0x10;
+	div = (readl(reg) & PBDIV_MASK) + 1;
+
+	return clk_freq / div;
+}
+
+static ulong pic32_get_cpuclk(struct pic32_clk_priv *priv)
+{
+	return pic32_get_pbclk(priv, PB7CLK);
+}
+
+static ulong pic32_set_refclk(struct pic32_clk_priv *priv, int periph,
+			      int parent_rate, int rate, int parent_id)
+{
+	void __iomem *reg;
+	u32 div, trim, v;
+	u64 frac;
+
+	WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
+
+	/* calculate dividers,
+	 *   rate = parent_rate / [2 * (div + (trim / 512))]
+	 */
+	if (parent_rate <= rate) {
+		div = 0;
+		trim = 0;
+	} else {
+		div = parent_rate / (rate << 1);
+		frac = parent_rate;
+		frac <<= 8;
+		do_div(frac, rate);
+		frac -= (u64)(div << 9);
+		trim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : (u32)frac;
+	}
+
+	reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
+
+	/* disable clk */
+	writel(REFO_ON | REFO_OE, reg + _CLR_OFFSET);
+
+	/* wait till previous src change is active */
+	wait_for_bit(__func__, reg, REFO_DIVSW_EN | REFO_ACTIVE,
+		     false, CONFIG_SYS_HZ, false);
+
+	/* parent_id */
+	v = readl(reg);
+	v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+	v |= (parent_id << REFO_SEL_SHIFT);
+
+	/* apply rodiv */
+	v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT);
+	v |= (div << REFO_DIV_SHIFT);
+	writel(v, reg);
+
+	/* apply trim */
+	v = readl(reg + REFO_TRIM_REG);
+	v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT);
+	v |= (trim << REFO_TRIM_SHIFT);
+	writel(v, reg + REFO_TRIM_REG);
+
+	/* enable clk */
+	writel(REFO_ON | REFO_OE, reg + _SET_OFFSET);
+
+	/* switch divider */
+	writel(REFO_DIVSW_EN, reg + _SET_OFFSET);
+
+	/* wait for divider switching to complete */
+	return wait_for_bit(__func__, reg, REFO_DIVSW_EN, false,
+			    CONFIG_SYS_HZ, false);
+}
+
+static ulong pic32_get_refclk(struct pic32_clk_priv *priv, int periph)
+{
+	u32 rodiv, rotrim, rosel, v, parent_rate;
+	void __iomem *reg;
+	u64 rate64;
+
+	WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
+
+	reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
+	v = readl(reg);
+	/* get rosel */
+	rosel = (v >> REFO_SEL_SHIFT) & REFO_SEL_MASK;
+	/* get div */
+	rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK;
+
+	/* get trim */
+	v = readl(reg + REFO_TRIM_REG);
+	rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK;
+
+	if (!rodiv)
+		return 0;
+
+	/* get parent rate */
+	switch (rosel) {
+	case ROCLK_SRC_SCLK:
+		parent_rate = pic32_get_cpuclk(priv);
+		break;
+	case ROCLK_SRC_SPLL:
+		parent_rate = pic32_get_pll_rate(priv);
+		break;
+	default:
+		parent_rate = 0;
+		break;
+	}
+
+	/* Calculation
+	 * rate = parent_rate / [2 * (div + (trim / 512))]
+	 */
+	if (rotrim) {
+		rodiv <<= 9;
+		rodiv += rotrim;
+		rate64 = parent_rate;
+		rate64 <<= 8;
+		do_div(rate64, rodiv);
+		v = (u32)rate64;
+	} else {
+		v = parent_rate / (rodiv << 1);
+	}
+	return v;
+}
+
+static ulong pic32_get_mpll_rate(struct pic32_clk_priv *priv)
+{
+	u32 v, idiv, mul;
+	u32 odiv1, odiv2;
+	u64 rate;
+
+	v = readl(priv->syscfg_base + CFGMPLL);
+	idiv = v & MPLL_IDIV;
+	mul = (v >> MPLL_MULT_SHIFT) & MPLL_MULT;
+	odiv1 = (v >> MPLL_ODIV1_SHIFT) & MPLL_ODIV1;
+	odiv2 = (v >> MPLL_ODIV2_SHIFT) & MPLL_ODIV2;
+
+	rate = (SYS_POSC_CLK_HZ / idiv) * mul;
+	do_div(rate, odiv1);
+	do_div(rate, odiv2);
+
+	return (ulong)rate;
+}
+
+static int pic32_mpll_init(struct pic32_clk_priv *priv)
+{
+	u32 v, mask;
+
+	/* initialize */
+	v = (MPLL_IDIV_INIT << MPLL_IDIV_SHIFT) |
+	    (MPLL_MULT_INIT << MPLL_MULT_SHIFT) |
+	    (MPLL_ODIV1_INIT << MPLL_ODIV1_SHIFT) |
+	    (MPLL_ODIV2_INIT << MPLL_ODIV2_SHIFT);
+
+	writel(v, priv->syscfg_base + CFGMPLL);
+
+	/* Wait for ready */
+	mask = MPLL_RDY | MPLL_VREG_RDY;
+	return wait_for_bit(__func__, priv->syscfg_base + CFGMPLL, mask,
+			    true, get_tbclk(), false);
+}
+
+static void pic32_clk_init(struct udevice *dev)
+{
+	const void *blob = gd->fdt_blob;
+	struct pic32_clk_priv *priv;
+	ulong rate, pll_hz;
+	char propname[50];
+	int i;
+
+	priv = dev_get_priv(dev);
+	pll_hz = pic32_get_pll_rate(priv);
+
+	/* Initialize REFOs as not initialized and enabled on reset. */
+	for (i = REF1CLK; i <= REF5CLK; i++) {
+		snprintf(propname, sizeof(propname),
+			 "microchip,refo%d-frequency", i - REF1CLK + 1);
+		rate = fdtdec_get_int(blob, dev->of_offset, propname, 0);
+		if (rate)
+			pic32_set_refclk(priv, i, pll_hz, rate, ROCLK_SRC_SPLL);
+	}
+
+	/* Memory PLL */
+	pic32_mpll_init(priv);
+}
+
+static ulong pic32_clk_get_rate(struct udevice *dev)
+{
+	struct pic32_clk_priv *priv = dev_get_priv(dev);
+
+	return pic32_get_cpuclk(priv);
+}
+
+static ulong pic32_get_periph_rate(struct udevice *dev, int periph)
+{
+	struct pic32_clk_priv *priv = dev_get_priv(dev);
+	ulong rate;
+
+	switch (periph) {
+	case PB1CLK ... PB7CLK:
+		rate = pic32_get_pbclk(priv, periph);
+		break;
+	case REF1CLK ... REF5CLK:
+		rate = pic32_get_refclk(priv, periph);
+		break;
+	case PLLCLK:
+		rate = pic32_get_pll_rate(priv);
+		break;
+	case MPLL:
+		rate = pic32_get_mpll_rate(priv);
+		break;
+	default:
+		rate = 0;
+		break;
+	}
+
+	return rate;
+}
+
+static ulong pic32_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+{
+	struct pic32_clk_priv *priv = dev_get_priv(dev);
+	ulong pll_hz;
+
+	switch (periph) {
+	case REF1CLK ... REF5CLK:
+		pll_hz = pic32_get_pll_rate(priv);
+		pic32_set_refclk(priv, periph, pll_hz, rate, ROCLK_SRC_SPLL);
+		break;
+	default:
+		break;
+	}
+
+	return rate;
+}
+
+static struct clk_ops pic32_pic32_clk_ops = {
+	.get_rate = pic32_clk_get_rate,
+	.set_periph_rate = pic32_set_periph_rate,
+	.get_periph_rate = pic32_get_periph_rate,
+};
+
+static int pic32_clk_probe(struct udevice *dev)
+{
+	struct pic32_clk_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->iobase = ioremap(addr, size);
+	if (!priv->iobase)
+		return -EINVAL;
+
+	priv->syscfg_base = pic32_get_syscfg_base();
+
+	/* initialize clocks */
+	pic32_clk_init(dev);
+
+	return 0;
+}
+
+static const struct udevice_id pic32_clk_ids[] = {
+	{ .compatible = "microchip,pic32mzda-clk"},
+	{}
+};
+
+U_BOOT_DRIVER(pic32_clk) = {
+	.name		= "pic32_clk",
+	.id		= UCLASS_CLK,
+	.of_match	= pic32_clk_ids,
+	.flags		= DM_FLAG_PRE_RELOC,
+	.ops		= &pic32_pic32_clk_ops,
+	.probe		= pic32_clk_probe,
+	.priv_auto_alloc_size = sizeof(struct pic32_clk_priv),
+};
diff --git a/include/dt-bindings/clock/microchip,clock.h b/include/dt-bindings/clock/microchip,clock.h
new file mode 100644
index 0000000..93c222d
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,clock.h
@@ -0,0 +1,29 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __CLK_MICROCHIP_PIC32
+#define __CLK_MICROCHIP_PIC32
+
+/* clock output indices */
+#define BASECLK	0
+#define PLLCLK	1
+#define MPLL	2
+#define SYSCLK	3
+#define PB1CLK	4
+#define PB2CLK	5
+#define PB3CLK	6
+#define PB4CLK	7
+#define PB5CLK	8
+#define PB6CLK	9
+#define PB7CLK	10
+#define REF1CLK	11
+#define REF2CLK	12
+#define REF3CLK	13
+#define REF4CLK	14
+#define REF5CLK	15
+
+#endif	/* __CLK_MICROCHIP_PIC32 */

From 5f266c60bf036a4adad2b69c1597ff49104959da Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:12 +0530
Subject: [PATCH 10/20] drivers: pinctrl: Add pinctrl driver for Microchip
 PIC32.

In PIC32 pin-controller is a combined gpio-controller, pin-mux and
pin-config module. Remappable peripherals are assigned pins through
per-pin based muxing logic. And pin configuration are performed on
specific port registers which are shared along with gpio controller.
Note, non-remappable peripherals have default pins assigned thus
require no muxing.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 drivers/pinctrl/Kconfig         |  10 ++
 drivers/pinctrl/Makefile        |   1 +
 drivers/pinctrl/pinctrl_pic32.c | 363 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl_pic32.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 57e6142..5dd2ddd 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -131,6 +131,16 @@ config PINCTRL_SANDBOX
 	  actually does nothing but print debug messages when pinctrl
 	  operations are invoked.
 
+config PIC32_PINCTRL
+	bool "Microchip PIC32 pin-control and pin-mux driver"
+	depends on DM && MACH_PIC32
+	default y
+	help
+	  Supports individual pin selection and configuration for each remappable
+	  peripheral available on Microchip PIC32 SoCs. This driver is controlled
+	  by a device tree node which contains both GPIO defintion and pin control
+	  functions.
+
 endif
 
 source "drivers/pinctrl/uniphier/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 70d25dc..b4f4650 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
 obj-$(CONFIG_PINCTRL_SANDBOX)	+= pinctrl-sandbox.o
 
 obj-$(CONFIG_ARCH_UNIPHIER)	+= uniphier/
+obj-$(CONFIG_PIC32_PINCTRL)	+= pinctrl_pic32.o
diff --git a/drivers/pinctrl/pinctrl_pic32.c b/drivers/pinctrl/pinctrl_pic32.c
new file mode 100644
index 0000000..5cf97ec
--- /dev/null
+++ b/drivers/pinctrl/pinctrl_pic32.c
@@ -0,0 +1,363 @@
+/*
+ * Pinctrl driver for Microchip PIC32 SoCs
+ * Copyright (c) 2015 Microchip Technology Inc.
+ * Written by Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <mach/pic32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* PIC32 has 10 peripheral ports with 16 pins each.
+ * Ports are marked PORTA-PORTK or PORT0-PORT9.
+ */
+enum {
+	PIC32_PORT_A = 0,
+	PIC32_PORT_B = 1,
+	PIC32_PORT_C = 2,
+	PIC32_PORT_D = 3,
+	PIC32_PORT_E = 4,
+	PIC32_PORT_F = 5,
+	PIC32_PORT_G = 6,
+	PIC32_PORT_H = 7,
+	PIC32_PORT_J = 8, /* no PORT_I */
+	PIC32_PORT_K = 9,
+	PIC32_PINS_PER_PORT = 16,
+};
+
+#define PIN_CONFIG_PIC32_DIGITAL	(PIN_CONFIG_END + 1)
+#define PIN_CONFIG_PIC32_ANALOG		(PIN_CONFIG_END + 2)
+
+/* pin configuration descriptor */
+struct pic32_pin_config {
+	u16 port;	/* port number */
+	u16 pin;	/* pin number in the port */
+	u32 config;	/* one of PIN_CONFIG_* */
+};
+#define PIN_CONFIG(_prt, _pin, _cfg) \
+	{.port = (_prt), .pin = (_pin), .config = (_cfg), }
+
+/* In PIC32 muxing is performed at pin-level through two
+ * different set of registers - one set for input functions,
+ * and other for output functions.
+ * Pin configuration is handled through port register.
+ */
+/* Port control registers */
+struct pic32_reg_port {
+	struct pic32_reg_atomic ansel;
+	struct pic32_reg_atomic tris;
+	struct pic32_reg_atomic port;
+	struct pic32_reg_atomic lat;
+	struct pic32_reg_atomic odc;
+	struct pic32_reg_atomic cnpu;
+	struct pic32_reg_atomic cnpd;
+	struct pic32_reg_atomic cncon;
+	struct pic32_reg_atomic unused[8];
+};
+
+/* Input function mux registers */
+struct pic32_reg_in_mux {
+	u32 unused0;
+	u32 int1[4];
+	u32 unused1;
+	u32 t2ck[8];
+	u32 ic1[9];
+	u32 unused2;
+	u32 ocfar;
+	u32 unused3;
+	u32 u1rx;
+	u32 u1cts;
+	u32 u2rx;
+	u32 u2cts;
+	u32 u3rx;
+	u32 u3cts;
+	u32 u4rx;
+	u32 u4cts;
+	u32 u5rx;
+	u32 u5cts;
+	u32 u6rx;
+	u32 u6cts;
+	u32 unused4;
+	u32 sdi1;
+	u32 ss1;
+	u32 unused5;
+	u32 sdi2;
+	u32 ss2;
+	u32 unused6;
+	u32 sdi3;
+	u32 ss3;
+	u32 unused7;
+	u32 sdi4;
+	u32 ss4;
+	u32 unused8;
+	u32 sdi5;
+	u32 ss5;
+	u32 unused9;
+	u32 sdi6;
+	u32 ss6;
+	u32 c1rx;
+	u32 c2rx;
+	u32 refclki1;
+	u32 refclki2;
+	u32 refclki3;
+	u32 refclki4;
+};
+
+/* output mux register offset */
+#define PPS_OUT(__port, __pin) \
+	(((__port) * PIC32_PINS_PER_PORT + (__pin)) << 2)
+
+
+struct pic32_pinctrl_priv {
+	struct pic32_reg_in_mux *mux_in; /* mux input function */
+	struct pic32_reg_port *pinconf; /* pin configuration*/
+	void __iomem *mux_out;	/* mux output function */
+};
+
+enum {
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_ETH,
+	PERIPH_ID_USB,
+	PERIPH_ID_SDHCI,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SQI,
+};
+
+static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv,
+			       u32 port_nr, u32 pin, u32 param)
+{
+	struct pic32_reg_port *port;
+
+	port = &priv->pinconf[port_nr];
+	switch (param) {
+	case PIN_CONFIG_PIC32_DIGITAL:
+		writel(BIT(pin), &port->ansel.clr);
+		break;
+	case PIN_CONFIG_PIC32_ANALOG:
+		writel(BIT(pin), &port->ansel.set);
+		break;
+	case PIN_CONFIG_INPUT_ENABLE:
+		writel(BIT(pin), &port->tris.set);
+		break;
+	case PIN_CONFIG_OUTPUT:
+		writel(BIT(pin), &port->tris.clr);
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		writel(BIT(pin), &port->cnpu.set);
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		writel(BIT(pin), &port->cnpd.set);
+		break;
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		writel(BIT(pin), &port->odc.set);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv,
+			       const struct pic32_pin_config *list, int count)
+{
+	int i;
+
+	for (i = 0 ; i < count; i++)
+		pic32_pinconfig_one(priv, list[i].port,
+				    list[i].pin, list[i].config);
+
+	return 0;
+}
+
+static void pic32_eth_pin_config(struct udevice *dev)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct pic32_pin_config configs[] = {
+		/* EMDC - D11 */
+		PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT),
+		/* ETXEN */
+		PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT),
+		/* ECRSDV */
+		PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE),
+		/* ERXD0 */
+		PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE),
+		PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN),
+		/* ERXD1 */
+		PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE),
+		PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN),
+		/* EREFCLK */
+		PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE),
+		/* ETXD1 */
+		PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT),
+		/* ETXD0 */
+		PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT),
+		/* EMDIO */
+		PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE),
+		/* ERXERR */
+		PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL),
+		PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE),
+	};
+
+	pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
+static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+
+	switch (func) {
+	case PERIPH_ID_UART2:
+		/* PPS for U2 RX/TX */
+		writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9));
+		writel(0x05, &priv->mux_in->u2rx); /* B0 */
+		/* set digital mode */
+		pic32_pinconfig_one(priv, PIC32_PORT_G, 9,
+				    PIN_CONFIG_PIC32_DIGITAL);
+		pic32_pinconfig_one(priv, PIC32_PORT_B, 0,
+				    PIN_CONFIG_PIC32_DIGITAL);
+		break;
+	case PERIPH_ID_ETH:
+		pic32_eth_pin_config(dev);
+		break;
+	default:
+		debug("%s: unknown-unhandled case\n", __func__);
+		break;
+	}
+
+	return 0;
+}
+
+static int pic32_pinctrl_get_periph_id(struct udevice *dev,
+				       struct udevice *periph)
+{
+	int ret;
+	u32 cell[2];
+
+	ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset,
+				   "interrupts", cell, ARRAY_SIZE(cell));
+	if (ret < 0)
+		return -EINVAL;
+
+	/* interrupt number */
+	switch (cell[0]) {
+	case 112 ... 114:
+		return PERIPH_ID_UART1;
+	case 145 ... 147:
+		return PERIPH_ID_UART2;
+	case 109 ... 111:
+		return PERIPH_ID_SPI1;
+	case 142 ... 144:
+		return PERIPH_ID_SPI2;
+	case 115 ... 117:
+		return PERIPH_ID_I2C1;
+	case 148 ... 150:
+		return PERIPH_ID_I2C2;
+	case 132 ... 133:
+		return PERIPH_ID_USB;
+	case 169:
+		return PERIPH_ID_SQI;
+	case 191:
+		return PERIPH_ID_SDHCI;
+	case 153:
+		return PERIPH_ID_ETH;
+	default:
+		break;
+	}
+
+	return -ENOENT;
+}
+
+static int pic32_pinctrl_set_state_simple(struct udevice *dev,
+					  struct udevice *periph)
+{
+	int func;
+
+	debug("%s: periph %s\n", __func__, periph->name);
+	func = pic32_pinctrl_get_periph_id(dev, periph);
+	if (func < 0)
+		return func;
+	return pic32_pinctrl_request(dev, func, 0);
+}
+
+static struct pinctrl_ops pic32_pinctrl_ops = {
+	.set_state_simple	= pic32_pinctrl_set_state_simple,
+	.request		= pic32_pinctrl_request,
+	.get_periph_id		= pic32_pinctrl_get_periph_id,
+};
+
+static int pic32_pinctrl_probe(struct udevice *dev)
+{
+	struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+	struct fdt_resource res;
+	void *fdt = (void *)gd->fdt_blob;
+	int node = dev->of_offset;
+	int ret;
+
+	ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+				     "ppsin", &res);
+	if (ret < 0) {
+		printf("pinctrl: resource \"ppsin\" not found\n");
+		return ret;
+	}
+	priv->mux_in = ioremap(res.start, fdt_resource_size(&res));
+
+	ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+				     "ppsout", &res);
+	if (ret < 0) {
+		printf("pinctrl: resource \"ppsout\" not found\n");
+		return ret;
+	}
+	priv->mux_out = ioremap(res.start, fdt_resource_size(&res));
+
+	ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+				     "port", &res);
+	if (ret < 0) {
+		printf("pinctrl: resource \"port\" not found\n");
+		return ret;
+	}
+	priv->pinconf = ioremap(res.start, fdt_resource_size(&res));
+
+	return 0;
+}
+
+static int pic32_pinctrl_bind(struct udevice *dev)
+{
+	/* scan child GPIO banks */
+	return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+static const struct udevice_id pic32_pinctrl_ids[] = {
+	{ .compatible = "microchip,pic32mzda-pinctrl" },
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_pic32) = {
+	.name		= "pinctrl_pic32",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= pic32_pinctrl_ids,
+	.ops		= &pic32_pinctrl_ops,
+	.probe		= pic32_pinctrl_probe,
+	.bind		= pic32_pinctrl_bind,
+	.priv_auto_alloc_size = sizeof(struct pic32_pinctrl_priv),
+};

From 386d934e0b2dbe64d4b156eb64b819bdd5c7c121 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:13 +0530
Subject: [PATCH 11/20] drivers: gpio: add driver for Microchip PIC32 GPIO
 controller.

In PIC32 GPIO controller is part of PIC32 pin controller.
PIC32 has ten independently programmable ports and each with multiple pins.
Each of these pins can be configured and used as GPIO, provided they
are not in use for other peripherals.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 drivers/gpio/Kconfig      |   7 ++
 drivers/gpio/Makefile     |   2 +-
 drivers/gpio/pic32_gpio.c | 174 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 182 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpio/pic32_gpio.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e60e9fd..845dc72 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -83,4 +83,11 @@ config VYBRID_GPIO
 	help
 	  Say yes here to support Vybrid vf610 GPIOs.
 
+config PIC32_GPIO
+	bool "Microchip PIC32 GPIO driver"
+	depends on DM_GPIO && MACH_PIC32
+	default y
+	help
+	  Say yes here to support Microchip PIC32 GPIOs.
+
 endmenu
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fb4fd25..845a6d4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO)	+= stm32_gpio.o
 obj-$(CONFIG_ZYNQ_GPIO)		+= zynq_gpio.o
 obj-$(CONFIG_VYBRID_GPIO)	+= vybrid_gpio.o
 obj-$(CONFIG_HIKEY_GPIO)	+= hi6220_gpio.o
-
+obj-$(CONFIG_PIC32_GPIO)	+= pic32_gpio.o
diff --git a/drivers/gpio/pic32_gpio.c b/drivers/gpio/pic32_gpio.c
new file mode 100644
index 0000000..499b4fa
--- /dev/null
+++ b/drivers/gpio/pic32_gpio.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2015 Microchip Technology Inc
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/compat.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <mach/pic32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Peripheral Pin Control */
+struct pic32_reg_port {
+	struct pic32_reg_atomic ansel;
+	struct pic32_reg_atomic tris;
+	struct pic32_reg_atomic port;
+	struct pic32_reg_atomic lat;
+	struct pic32_reg_atomic open_drain;
+	struct pic32_reg_atomic cnpu;
+	struct pic32_reg_atomic cnpd;
+	struct pic32_reg_atomic cncon;
+};
+
+enum {
+	MICROCHIP_GPIO_DIR_OUT,
+	MICROCHIP_GPIO_DIR_IN,
+	MICROCHIP_GPIOS_PER_BANK = 16,
+};
+
+struct pic32_gpio_priv {
+	struct pic32_reg_port *regs;
+	char name[2];
+};
+
+static int pic32_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+
+	return !!(readl(&priv->regs->port.raw) & BIT(offset));
+}
+
+static int pic32_gpio_set_value(struct udevice *dev, unsigned offset,
+				int value)
+{
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+	int mask = BIT(offset);
+
+	if (value)
+		writel(mask, &priv->regs->port.set);
+	else
+		writel(mask, &priv->regs->port.clr);
+
+	return 0;
+}
+
+static int pic32_gpio_direction(struct udevice *dev, unsigned offset)
+{
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+
+	/* pin in analog mode ? */
+	if (readl(&priv->regs->ansel.raw) & BIT(offset))
+		return -EPERM;
+
+	if (readl(&priv->regs->tris.raw) & BIT(offset))
+		return MICROCHIP_GPIO_DIR_IN;
+	else
+		return MICROCHIP_GPIO_DIR_OUT;
+}
+
+static int pic32_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+	int mask = BIT(offset);
+
+	writel(mask, &priv->regs->ansel.clr);
+	writel(mask, &priv->regs->tris.set);
+
+	return 0;
+}
+
+static int pic32_gpio_direction_output(struct udevice *dev,
+				       unsigned offset, int value)
+{
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+	int mask = BIT(offset);
+
+	writel(mask, &priv->regs->ansel.clr);
+	writel(mask, &priv->regs->tris.clr);
+
+	pic32_gpio_set_value(dev, offset, value);
+	return 0;
+}
+
+static int pic32_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
+			    struct fdtdec_phandle_args *args)
+{
+	desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
+
+	return 0;
+}
+
+static int pic32_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	int ret = GPIOF_UNUSED;
+
+	switch (pic32_gpio_direction(dev, offset)) {
+	case MICROCHIP_GPIO_DIR_OUT:
+		ret = GPIOF_OUTPUT;
+		break;
+	case MICROCHIP_GPIO_DIR_IN:
+		ret = GPIOF_INPUT;
+		break;
+	default:
+		ret = GPIOF_UNUSED;
+		break;
+	}
+	return ret;
+}
+
+static const struct dm_gpio_ops gpio_pic32_ops = {
+	.direction_input	= pic32_gpio_direction_input,
+	.direction_output	= pic32_gpio_direction_output,
+	.get_value		= pic32_gpio_get_value,
+	.set_value		= pic32_gpio_set_value,
+	.get_function		= pic32_gpio_get_function,
+	.xlate			= pic32_gpio_xlate,
+};
+
+static int pic32_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct pic32_gpio_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+	char *end;
+	int bank;
+
+	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	uc_priv->gpio_count = MICROCHIP_GPIOS_PER_BANK;
+	/* extract bank name */
+	end = strrchr(dev->name, '@');
+	bank = trailing_strtoln(dev->name, end);
+	priv->name[0] = 'A' + bank;
+	uc_priv->bank_name = priv->name;
+
+	return 0;
+}
+
+static const struct udevice_id pic32_gpio_ids[] = {
+	{ .compatible = "microchip,pic32mzda-gpio" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpio_pic32) = {
+	.name		= "gpio_pic32",
+	.id		= UCLASS_GPIO,
+	.of_match	= pic32_gpio_ids,
+	.ops		= &gpio_pic32_ops,
+	.probe		= pic32_gpio_probe,
+	.priv_auto_alloc_size	= sizeof(struct pic32_gpio_priv),
+};

From 9e160ee823b44e0a63bc469d42d7d9fcab54b60b Mon Sep 17 00:00:00 2001
From: Paul Thacker <paul.thacker@microchip.com>
Date: Thu, 28 Jan 2016 15:30:14 +0530
Subject: [PATCH 12/20] drivers: serial: add driver for Microchip PIC32 UART
 controller.

This adds PIC32 UART controller support based on driver model.

Signed-off-by: Paul Thacker <paul.thacker@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 .../serial/microchip,pic32-uart.txt                |   5 +
 drivers/serial/Kconfig                             |  15 ++
 drivers/serial/Makefile                            |   1 +
 drivers/serial/serial_pic32.c                      | 198 +++++++++++++++++++++
 4 files changed, 219 insertions(+)
 create mode 100644 doc/device-tree-bindings/serial/microchip,pic32-uart.txt
 create mode 100644 drivers/serial/serial_pic32.c

diff --git a/doc/device-tree-bindings/serial/microchip,pic32-uart.txt b/doc/device-tree-bindings/serial/microchip,pic32-uart.txt
new file mode 100644
index 0000000..f00e215
--- /dev/null
+++ b/doc/device-tree-bindings/serial/microchip,pic32-uart.txt
@@ -0,0 +1,5 @@
+* Microchip PIC32 serial UART
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-uart".
+- reg: exactly one register range.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1ab6128..fac3176 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -150,6 +150,14 @@ config DEBUG_UART_PL011
 	  work. The driver will be available until the real driver model
 	  serial is running.
 
+config DEBUG_UART_PIC32
+	bool "Microchip PIC32"
+	depends on PIC32_SERIAL
+	help
+	  Select this to enable a debug UART using the serial_pic32 driver. You
+	  will need to provide parameters to make this work. The driver will
+	  be available until the real driver model serial is running.
+
 endchoice
 
 config DEBUG_UART_BASE
@@ -241,6 +249,13 @@ config FSL_LPUART
 	  Select this to enable a Low Power UART for Freescale VF610 and
 	  QorIQ Layerscape devices.
 
+config PIC32_SERIAL
+	bool "Support for Microchip PIC32 on-chip UART"
+	depends on DM_SERIAL && MACH_PIC32
+	default y
+	help
+	  Support for the UART found on Microchip PIC32 SoC's.
+
 config SYS_NS16550
 	bool "NS16550 UART or compatible"
 	help
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index dd87147..57cd38b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_MXS_AUART) += mxs_auart.o
 obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
 obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
 obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o
+obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o
 
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/serial_pic32.c b/drivers/serial/serial_pic32.c
new file mode 100644
index 0000000..af9fbbf
--- /dev/null
+++ b/drivers/serial/serial_pic32.c
@@ -0,0 +1,198 @@
+/*
+ * (c) 2015 Paul Thacker <paul.thacker@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <serial.h>
+#include <wait_bit.h>
+#include <mach/pic32.h>
+#include <dt-bindings/clock/microchip,clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* UART Control Registers */
+#define U_MOD		0x00
+#define U_MODCLR	(U_MOD + _CLR_OFFSET)
+#define U_MODSET	(U_MOD + _SET_OFFSET)
+#define U_STA		0x10
+#define U_STACLR	(U_STA + _CLR_OFFSET)
+#define U_STASET	(U_STA + _SET_OFFSET)
+#define U_TXR		0x20
+#define U_RXR		0x30
+#define U_BRG		0x40
+
+/* U_MOD bits */
+#define UART_ENABLE		BIT(15)
+
+/* U_STA bits */
+#define UART_RX_ENABLE		BIT(12)
+#define UART_TX_BRK		BIT(11)
+#define UART_TX_ENABLE		BIT(10)
+#define UART_TX_FULL		BIT(9)
+#define UART_TX_EMPTY		BIT(8)
+#define UART_RX_OVER		BIT(1)
+#define UART_RX_DATA_AVAIL	BIT(0)
+
+struct pic32_uart_priv {
+	void __iomem *base;
+	ulong uartclk;
+};
+
+/*
+ * Initialize the serial port with the given baudrate.
+ * The settings are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+static int pic32_serial_init(void __iomem *base, ulong clk, u32 baudrate)
+{
+	u32 div = DIV_ROUND_CLOSEST(clk, baudrate * 16);
+
+	/* wait for TX FIFO to empty */
+	wait_for_bit(__func__, base + U_STA, UART_TX_EMPTY,
+		     true, CONFIG_SYS_HZ, false);
+
+	/* send break */
+	writel(UART_TX_BRK, base + U_STASET);
+
+	/* disable and clear mode */
+	writel(0, base + U_MOD);
+	writel(0, base + U_STA);
+
+	/* set baud rate generator */
+	writel(div - 1, base + U_BRG);
+
+	/* enable the UART for TX and RX */
+	writel(UART_TX_ENABLE | UART_RX_ENABLE, base + U_STASET);
+
+	/* enable the UART */
+	writel(UART_ENABLE, base + U_MODSET);
+	return 0;
+}
+
+/* Check whether any char pending in RX fifo */
+static int pic32_uart_pending_input(void __iomem *base)
+{
+	/* check if rx buffer overrun error has occurred */
+	if (readl(base + U_STA) & UART_RX_OVER) {
+		readl(base + U_RXR);
+
+		/* clear overrun error to keep receiving */
+		writel(UART_RX_OVER, base + U_STACLR);
+	}
+
+	/* In PIC32 there is no way to know number of outstanding
+	 * chars in rx-fifo. Only it can be known whether there is any.
+	 */
+	return readl(base + U_STA) & UART_RX_DATA_AVAIL;
+}
+
+static int pic32_uart_pending(struct udevice *dev, bool input)
+{
+	struct pic32_uart_priv *priv = dev_get_priv(dev);
+
+	if (input)
+		return pic32_uart_pending_input(priv->base);
+
+	return !(readl(priv->base + U_STA) & UART_TX_EMPTY);
+}
+
+static int pic32_uart_setbrg(struct udevice *dev, int baudrate)
+{
+	struct pic32_uart_priv *priv = dev_get_priv(dev);
+
+	return pic32_serial_init(priv->base, priv->uartclk, baudrate);
+}
+
+static int pic32_uart_putc(struct udevice *dev, const char ch)
+{
+	struct pic32_uart_priv *priv = dev_get_priv(dev);
+
+	/* Check if Tx FIFO is full */
+	if (readl(priv->base + U_STA) & UART_TX_FULL)
+		return -EAGAIN;
+
+	/* pump the char to tx buffer */
+	writel(ch, priv->base + U_TXR);
+
+	return 0;
+}
+
+static int pic32_uart_getc(struct udevice *dev)
+{
+	struct pic32_uart_priv *priv = dev_get_priv(dev);
+
+	/* return error if RX fifo is empty */
+	if (!pic32_uart_pending_input(priv->base))
+		return -EAGAIN;
+
+	/* read the character from rx buffer */
+	return readl(priv->base + U_RXR) & 0xff;
+}
+
+static int pic32_uart_probe(struct udevice *dev)
+{
+	struct pic32_uart_priv *priv = dev_get_priv(dev);
+	struct udevice *clkdev;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	/* get address */
+	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->base = ioremap(addr, size);
+
+	/* get clock rate */
+	ret = clk_get_by_index(dev, 0, &clkdev);
+	if (ret < 0)
+		return ret;
+	priv->uartclk = clk_get_periph_rate(clkdev, ret);
+
+	/* initialize serial */
+	return pic32_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
+}
+
+static const struct dm_serial_ops pic32_uart_ops = {
+	.putc		= pic32_uart_putc,
+	.pending	= pic32_uart_pending,
+	.getc		= pic32_uart_getc,
+	.setbrg		= pic32_uart_setbrg,
+};
+
+static const struct udevice_id pic32_uart_ids[] = {
+	{ .compatible = "microchip,pic32mzda-uart" },
+	{}
+};
+
+U_BOOT_DRIVER(pic32_serial) = {
+	.name		= "pic32-uart",
+	.id		= UCLASS_SERIAL,
+	.of_match	= pic32_uart_ids,
+	.probe		= pic32_uart_probe,
+	.ops		= &pic32_uart_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
+	.priv_auto_alloc_size = sizeof(struct pic32_uart_priv),
+};
+
+#ifdef CONFIG_DEBUG_UART_PIC32
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
+
+	pic32_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	writel(ch, CONFIG_DEBUG_UART_BASE + U_TXR);
+}
+
+DEBUG_UART_FUNCS
+#endif

From 9ffa7a35ef940b27813c11f68eb28a6b82696915 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:15 +0530
Subject: [PATCH 13/20] drivers: ddr: Add DDR2 SDRAM controller driver for
 Microchip PIC32.

This driver initializes PIC32 DDR2 SDRAM controller and internal DDR2 Phy module.
DDR2 controller operates in half-rate mode (upto 533MHZ frequency).

Signed-off-by: Paul Thacker <paul.thacker@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/mips/mach-pic32/include/mach/ddr.h |  32 ++++
 drivers/Makefile                        |   1 +
 drivers/ddr/microchip/Makefile          |   6 +
 drivers/ddr/microchip/ddr2.c            | 278 ++++++++++++++++++++++++++++++++
 drivers/ddr/microchip/ddr2_regs.h       | 148 +++++++++++++++++
 drivers/ddr/microchip/ddr2_timing.h     |  65 ++++++++
 6 files changed, 530 insertions(+)
 create mode 100644 arch/mips/mach-pic32/include/mach/ddr.h
 create mode 100644 drivers/ddr/microchip/Makefile
 create mode 100644 drivers/ddr/microchip/ddr2.c
 create mode 100644 drivers/ddr/microchip/ddr2_regs.h
 create mode 100644 drivers/ddr/microchip/ddr2_timing.h

diff --git a/arch/mips/mach-pic32/include/mach/ddr.h b/arch/mips/mach-pic32/include/mach/ddr.h
new file mode 100644
index 0000000..00abfa3
--- /dev/null
+++ b/arch/mips/mach-pic32/include/mach/ddr.h
@@ -0,0 +1,32 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MICROCHIP_PIC32_DDR_H
+#define __MICROCHIP_PIC32_DDR_H
+
+/* called by initdram() function */
+void ddr2_phy_init(void);
+void ddr2_ctrl_init(void);
+phys_size_t ddr2_calculate_size(void);
+
+/* Maximum number of agents */
+#define NUM_AGENTS		5
+
+/* Board can provide agent specific parameters for arbitration by
+ * filling struct ddr2_arbiter_params for all the agents and
+ * implementing board_get_ddr_arbiter_params() to return the filled
+ * structure.
+ */
+struct ddr2_arbiter_params {
+	u32 min_limit;	/* min bursts to execute per arbitration */
+	u32 req_period; /* request period threshold for accepted cmds */
+	u32 min_cmd_acpt; /* min number of accepted cmds */
+};
+
+const struct ddr2_arbiter_params *board_get_ddr_arbiter_params(void);
+
+#endif /* __MICROCHIP_PIC32_DDR_H */
diff --git a/drivers/Makefile b/drivers/Makefile
index 6294048..e7eab66 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,4 +69,5 @@ obj-y += soc/
 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
 
+obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 endif
diff --git a/drivers/ddr/microchip/Makefile b/drivers/ddr/microchip/Makefile
new file mode 100644
index 0000000..305c48b
--- /dev/null
+++ b/drivers/ddr/microchip/Makefile
@@ -0,0 +1,6 @@
+#
+# Copyright (C) 2015 Microchip Technology Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+obj-$(CONFIG_MACH_PIC32) += ddr2.o
diff --git a/drivers/ddr/microchip/ddr2.c b/drivers/ddr/microchip/ddr2.c
new file mode 100644
index 0000000..6056418
--- /dev/null
+++ b/drivers/ddr/microchip/ddr2.c
@@ -0,0 +1,278 @@
+/*
+ * (c) 2015 Paul Thacker <paul.thacker@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#include <common.h>
+#include <wait_bit.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <mach/pic32.h>
+#include <mach/ddr.h>
+
+#include "ddr2_regs.h"
+#include "ddr2_timing.h"
+
+/* init DDR2 Phy */
+void ddr2_phy_init(void)
+{
+	struct ddr2_phy_regs *ddr2_phy;
+	u32 pad_ctl;
+
+	ddr2_phy = ioremap(PIC32_DDR2P_BASE, sizeof(*ddr2_phy));
+
+	/* PHY_DLL_RECALIB */
+	writel(DELAY_START_VAL(3) | DISABLE_RECALIB(0) |
+	       RECALIB_CNT(0x10), &ddr2_phy->dll_recalib);
+
+	/* PHY_PAD_CTRL */
+	pad_ctl = ODT_SEL | ODT_EN | DRIVE_SEL(0) |
+		  ODT_PULLDOWN(2) | ODT_PULLUP(3) |
+		  EXTRA_OEN_CLK(0) | NOEXT_DLL |
+		  DLR_DFT_WRCMD | HALF_RATE |
+		  DRVSTR_PFET(0xe) | DRVSTR_NFET(0xe) |
+		  RCVR_EN | PREAMBLE_DLY(2);
+	writel(pad_ctl, &ddr2_phy->pad_ctrl);
+
+	/* SCL_CONFIG_0 */
+	writel(SCL_BURST8 | SCL_DDR_CONNECTED | SCL_RCAS_LAT(RL) |
+	       SCL_ODTCSWW, &ddr2_phy->scl_config_1);
+
+	/* SCL_CONFIG_1 */
+	writel(SCL_CSEN | SCL_WCAS_LAT(WL), &ddr2_phy->scl_config_2);
+
+	/* SCL_LAT */
+	writel(SCL_CAPCLKDLY(3) | SCL_DDRCLKDLY(4), &ddr2_phy->scl_latency);
+}
+
+/* start phy self calibration logic */
+static int ddr2_phy_calib_start(void)
+{
+	struct ddr2_phy_regs *ddr2_phy;
+
+	ddr2_phy = ioremap(PIC32_DDR2P_BASE, sizeof(*ddr2_phy));
+
+	/* DDR Phy SCL Start */
+	writel(SCL_START | SCL_EN, &ddr2_phy->scl_start);
+
+	/* Wait for SCL for data byte to pass */
+	return wait_for_bit(__func__, &ddr2_phy->scl_start, SCL_LUBPASS,
+			    true, CONFIG_SYS_HZ, false);
+}
+
+/* DDR2 Controller initialization */
+
+/* Target Agent Arbiter */
+static void ddr_set_arbiter(struct ddr2_ctrl_regs *ctrl,
+			    const struct ddr2_arbiter_params *const param)
+{
+	int i;
+
+	for (i = 0; i < NUM_AGENTS; i++) {
+		/* set min burst size */
+		writel(i * MIN_LIM_WIDTH, &ctrl->tsel);
+		writel(param->min_limit, &ctrl->minlim);
+
+		/* set request period (4 * req_period clocks) */
+		writel(i * RQST_PERIOD_WIDTH, &ctrl->tsel);
+		writel(param->req_period, &ctrl->reqprd);
+
+		/* set number of burst accepted */
+		writel(i * MIN_CMDACPT_WIDTH, &ctrl->tsel);
+		writel(param->min_cmd_acpt, &ctrl->mincmd);
+	}
+}
+
+const struct ddr2_arbiter_params *__weak board_get_ddr_arbiter_params(void)
+{
+	/* default arbiter parameters */
+	static const struct ddr2_arbiter_params arb_params[] = {
+		{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x04,},
+		{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x10,},
+		{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x10,},
+		{ .min_limit = 0x04, .req_period = 0xff, .min_cmd_acpt = 0x04,},
+		{ .min_limit = 0x04, .req_period = 0xff, .min_cmd_acpt = 0x04,},
+	};
+
+	return &arb_params[0];
+}
+
+static void host_load_cmd(struct ddr2_ctrl_regs *ctrl, u32 cmd_idx,
+			  u32 hostcmd2, u32 hostcmd1, u32 delay)
+{
+	u32 hc_delay;
+
+	hc_delay = max_t(u32, DIV_ROUND_UP(delay, T_CK), 2) - 2;
+	writel(hostcmd1, &ctrl->cmd10[cmd_idx]);
+	writel((hostcmd2 & 0x7ff) | (hc_delay << 11), &ctrl->cmd20[cmd_idx]);
+}
+
+/* init DDR2 Controller */
+void ddr2_ctrl_init(void)
+{
+	u32 wr2prech, rd2prech, wr2rd, wr2rd_cs;
+	u32 ras2ras, ras2cas, prech2ras, temp;
+	const struct ddr2_arbiter_params *arb_params;
+	struct ddr2_ctrl_regs *ctrl;
+
+	ctrl = ioremap(PIC32_DDR2C_BASE, sizeof(*ctrl));
+
+	/* PIC32 DDR2 controller always work in HALF_RATE */
+	writel(HALF_RATE_MODE, &ctrl->memwidth);
+
+	/* Set arbiter configuration per target */
+	arb_params = board_get_ddr_arbiter_params();
+	ddr_set_arbiter(ctrl, arb_params);
+
+	/* Address Configuration, model {CS, ROW, BA, COL} */
+	writel((ROW_ADDR_RSHIFT | (BA_RSHFT << 8) | (CS_ADDR_RSHIFT << 16) |
+	       (COL_HI_RSHFT << 24) | (SB_PRI << 29)  |
+	       (EN_AUTO_PRECH << 30)), &ctrl->memcfg0);
+
+	writel(ROW_ADDR_MASK, &ctrl->memcfg1);
+	writel(COL_HI_MASK, &ctrl->memcfg2);
+	writel(COL_LO_MASK, &ctrl->memcfg3);
+	writel(BA_MASK | (CS_ADDR_MASK << 8), &ctrl->memcfg4);
+
+	/* Refresh Config */
+	writel(REFCNT_CLK(DIV_ROUND_UP(T_RFI, T_CK_CTRL) - 2) |
+	       REFDLY_CLK(DIV_ROUND_UP(T_RFC_MIN, T_CK_CTRL) - 2) |
+	       MAX_PEND_REF(7),
+	       &ctrl->refcfg);
+
+	/* Power Config */
+	writel(ECC_EN(0) | ERR_CORR_EN(0) | EN_AUTO_PWR_DN(0) |
+	       EN_AUTO_SELF_REF(3) | PWR_DN_DLY(8) |
+	       SELF_REF_DLY(17) | PRECH_PWR_DN_ONLY(0),
+	       &ctrl->pwrcfg);
+
+	/* Delay Config */
+	wr2rd = max_t(u32, DIV_ROUND_UP(T_WTR, T_CK_CTRL),
+		      DIV_ROUND_UP(T_WTR_TCK, 2)) + WL + BL;
+	wr2rd_cs = max_t(u32, wr2rd - 1, 3);
+	wr2prech = DIV_ROUND_UP(T_WR, T_CK_CTRL) + WL + BL;
+	rd2prech = max_t(u32, DIV_ROUND_UP(T_RTP, T_CK_CTRL),
+			 DIV_ROUND_UP(T_RTP_TCK, 2)) + BL - 2;
+	ras2ras = max_t(u32, DIV_ROUND_UP(T_RRD, T_CK_CTRL),
+			DIV_ROUND_UP(T_RRD_TCK, 2)) - 1;
+	ras2cas = DIV_ROUND_UP(T_RCD, T_CK_CTRL) - 1;
+	prech2ras = DIV_ROUND_UP(T_RP, T_CK_CTRL) - 1;
+
+	writel(((wr2rd & 0x0f) |
+	       ((wr2rd_cs & 0x0f) << 4) |
+	       ((BL - 1) << 8) |
+	       (BL << 12) |
+	       ((BL - 1) << 16) |
+	       ((BL - 1) << 20) |
+	       ((BL + 2) << 24) |
+	       ((RL - WL + 3) << 28)), &ctrl->dlycfg0);
+
+	writel(((T_CKE_TCK - 1) |
+	       (((DIV_ROUND_UP(T_DLLK, 2) - 2) & 0xff) << 8) |
+	       ((T_CKE_TCK - 1) << 16) |
+	       ((max_t(u32, T_XP_TCK, T_CKE_TCK) - 1) << 20) |
+	       ((wr2prech >> 4) << 26) |
+	       ((wr2rd >> 4) << 27) |
+	       ((wr2rd_cs >> 4) << 28) |
+	       (((RL + 5) >> 4) << 29) |
+	       ((DIV_ROUND_UP(T_DLLK, 2) >> 8) << 30)), &ctrl->dlycfg1);
+
+	writel((DIV_ROUND_UP(T_RP, T_CK_CTRL) |
+	       (rd2prech << 8) |
+	       ((wr2prech & 0x0f) << 12) |
+	       (ras2ras << 16) |
+	       (ras2cas << 20) |
+	       (prech2ras << 24) |
+	       ((RL + 3) << 28)), &ctrl->dlycfg2);
+
+	writel(((DIV_ROUND_UP(T_RAS_MIN, T_CK_CTRL) - 1) |
+	       ((DIV_ROUND_UP(T_RC, T_CK_CTRL) - 1) << 8) |
+	       ((DIV_ROUND_UP(T_FAW, T_CK_CTRL) - 1) << 16)),
+	       &ctrl->dlycfg3);
+
+	/* ODT Config */
+	writel(0x0, &ctrl->odtcfg);
+	writel(BIT(16), &ctrl->odtencfg);
+	writel(ODTRDLY(RL - 3) | ODTWDLY(WL - 3) | ODTRLEN(2) | ODTWLEN(3),
+	       &ctrl->odtcfg);
+
+	/* Transfer Configuration */
+	writel(NXTDATRQDLY(2) | NXDATAVDLY(4) | RDATENDLY(2) |
+	       MAX_BURST(3) | (7 << 28) | BIG_ENDIAN(0),
+	       &ctrl->xfercfg);
+
+	/* DRAM Initialization */
+	/* CKE high after reset and wait 400 nsec */
+	host_load_cmd(ctrl, 0, 0, IDLE_NOP, 400000);
+
+	/* issue precharge all command */
+	host_load_cmd(ctrl, 1, 0x04, PRECH_ALL_CMD, T_RP + T_CK);
+
+	/* initialize EMR2 */
+	host_load_cmd(ctrl, 2, 0x200, LOAD_MODE_CMD, T_MRD_TCK * T_CK);
+
+	/* initialize EMR3 */
+	host_load_cmd(ctrl, 3, 0x300, LOAD_MODE_CMD, T_MRD_TCK * T_CK);
+
+	/*
+	 * RDQS disable, DQSB enable, OCD exit, 150 ohm termination,
+	 * AL=0, DLL enable
+	 */
+	host_load_cmd(ctrl, 4, 0x100,
+		      LOAD_MODE_CMD | (0x40 << 24), T_MRD_TCK * T_CK);
+	/*
+	 * PD fast exit, WR REC = T_WR in clocks -1,
+	 * DLL reset, CAS = RL, burst = 4
+	 */
+	temp = ((DIV_ROUND_UP(T_WR, T_CK) - 1) << 1) | 1;
+	host_load_cmd(ctrl, 5, temp, LOAD_MODE_CMD | (RL << 28) | (2 << 24),
+		      T_MRD_TCK * T_CK);
+
+	/* issue precharge all command */
+	host_load_cmd(ctrl, 6, 4, PRECH_ALL_CMD, T_RP + T_CK);
+
+	/* issue refresh command */
+	host_load_cmd(ctrl, 7, 0, REF_CMD, T_RFC_MIN);
+
+	/* issue refresh command */
+	host_load_cmd(ctrl, 8, 0, REF_CMD, T_RFC_MIN);
+
+	/* Mode register programming as before without DLL reset */
+	host_load_cmd(ctrl, 9, temp, LOAD_MODE_CMD | (RL << 28) | (3 << 24),
+		      T_MRD_TCK * T_CK);
+
+	/* extended mode register same as before with OCD default */
+	host_load_cmd(ctrl, 10, 0x103, LOAD_MODE_CMD | (0xc << 24),
+		      T_MRD_TCK * T_CK);
+
+	/* extended mode register same as before with OCD exit */
+	host_load_cmd(ctrl, 11, 0x100, LOAD_MODE_CMD | (0x4 << 28),
+		      140 * T_CK);
+
+	writel(CMD_VALID | NUMHOSTCMD(11), &ctrl->cmdissue);
+
+	/* start memory initialization */
+	writel(INIT_START, &ctrl->memcon);
+
+	/* wait for all host cmds to be transmitted */
+	wait_for_bit(__func__, &ctrl->cmdissue, CMD_VALID, false,
+		     CONFIG_SYS_HZ, false);
+
+	/* inform all cmds issued, ready for normal operation */
+	writel(INIT_START | INIT_DONE, &ctrl->memcon);
+
+	/* perform phy caliberation */
+	if (ddr2_phy_calib_start())
+		printf("ddr2: phy calib failed\n");
+}
+
+phys_size_t ddr2_calculate_size(void)
+{
+	u32 temp;
+
+	temp = 1 << (COL_BITS + BA_BITS + ROW_BITS);
+	/* 16-bit data width between controller and DIMM */
+	temp = temp * CS_BITS * (16 / 8);
+	return (phys_size_t)temp;
+}
diff --git a/drivers/ddr/microchip/ddr2_regs.h b/drivers/ddr/microchip/ddr2_regs.h
new file mode 100644
index 0000000..0f4b159
--- /dev/null
+++ b/drivers/ddr/microchip/ddr2_regs.h
@@ -0,0 +1,148 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MICROCHIP_DDR2_REGS_H
+#define __MICROCHIP_DDR2_REGS_H
+
+#include <linux/bitops.h>
+
+/* DDR2 Controller */
+struct ddr2_ctrl_regs {
+	u32 tsel;
+	u32 minlim;
+	u32 reqprd;
+	u32 mincmd;
+	u32 memcon;
+	u32 memcfg0;
+	u32 memcfg1;
+	u32 memcfg2;
+	u32 memcfg3;
+	u32 memcfg4;
+	u32 refcfg;
+	u32 pwrcfg;
+	u32 dlycfg0;
+	u32 dlycfg1;
+	u32 dlycfg2;
+	u32 dlycfg3;
+	u32 odtcfg;
+	u32 xfercfg;
+	u32 cmdissue;
+	u32 odtencfg;
+	u32 memwidth;
+	u32 unused[11];
+	u32 cmd10[16];
+	u32 cmd20[16];
+};
+
+/* Arbiter Config */
+#define MIN_LIM_WIDTH		5
+#define RQST_PERIOD_WIDTH	8
+#define MIN_CMDACPT_WIDTH	8
+
+/* Refresh Config */
+#define REFCNT_CLK(x)		(x)
+#define REFDLY_CLK(x)		((x) << 16)
+#define MAX_PEND_REF(x)		((x) << 24)
+
+/* Power Config */
+#define PRECH_PWR_DN_ONLY(x)	((x) << 22)
+#define SELF_REF_DLY(x)		((x) << 12)
+#define PWR_DN_DLY(x)		((x) << 4)
+#define EN_AUTO_SELF_REF(x)	((x) << 3)
+#define EN_AUTO_PWR_DN(x)	((x) << 2)
+#define ERR_CORR_EN(x)		((x) << 1)
+#define ECC_EN(x)		(x)
+
+/* Memory Width */
+#define HALF_RATE_MODE		BIT(3)
+
+/* Delay Config */
+#define ODTWLEN(x)	((x) << 20)
+#define ODTRLEN(x)	((x) << 16)
+#define ODTWDLY(x)	((x) << 12)
+#define ODTRDLY(x)	((x) << 8)
+
+/* Xfer Config */
+#define BIG_ENDIAN(x)	((x) << 31)
+#define MAX_BURST(x)	((x) << 24)
+#define RDATENDLY(x)	((x) << 16)
+#define NXDATAVDLY(x)	((x) << 4)
+#define NXTDATRQDLY(x)	((x) << 0)
+
+/* Host Commands */
+#define IDLE_NOP	0x00ffffff
+#define PRECH_ALL_CMD	0x00fff401
+#define REF_CMD		0x00fff801
+#define LOAD_MODE_CMD	0x00fff001
+#define CKE_LOW		0x00ffeffe
+
+#define NUM_HOST_CMDS	12
+
+/* Host CMD Issue */
+#define CMD_VALID	BIT(4)
+#define NUMHOSTCMD(x)	(x)
+
+/* Memory Control */
+#define INIT_DONE	BIT(1)
+#define INIT_START	BIT(0)
+
+/* Address Control */
+#define EN_AUTO_PRECH		0
+#define SB_PRI			1
+
+/* DDR2 Phy Register */
+struct ddr2_phy_regs {
+	u32 scl_start;
+	u32 unused1[2];
+	u32 scl_latency;
+	u32 unused2[2];
+	u32 scl_config_1;
+	u32 scl_config_2;
+	u32 pad_ctrl;
+	u32 dll_recalib;
+};
+
+/* PHY PAD CONTROL */
+#define ODT_SEL			BIT(0)
+#define ODT_EN			BIT(1)
+#define DRIVE_SEL(x)		((x) << 2)
+#define ODT_PULLDOWN(x)		((x) << 4)
+#define ODT_PULLUP(x)		((x) << 6)
+#define EXTRA_OEN_CLK(x)	((x) << 8)
+#define NOEXT_DLL		BIT(9)
+#define DLR_DFT_WRCMD		BIT(13)
+#define HALF_RATE		BIT(14)
+#define DRVSTR_PFET(x)		((x) << 16)
+#define DRVSTR_NFET(x)		((x) << 20)
+#define RCVR_EN			BIT(28)
+#define PREAMBLE_DLY(x)		((x) << 29)
+
+/* PHY DLL RECALIBRATE */
+#define RECALIB_CNT(x)		((x) << 8)
+#define DISABLE_RECALIB(x)	((x) << 26)
+#define DELAY_START_VAL(x)	((x) << 28)
+
+/* PHY SCL CONFIG1 */
+#define SCL_BURST8		BIT(0)
+#define SCL_DDR_CONNECTED		BIT(1)
+#define SCL_RCAS_LAT(x)		((x) << 4)
+#define SCL_ODTCSWW		BIT(24)
+
+/* PHY SCL CONFIG2 */
+#define SCL_CSEN		BIT(0)
+#define SCL_WCAS_LAT(x)		((x) << 8)
+
+/* PHY SCL Latency */
+#define SCL_CAPCLKDLY(x)	((x) << 0)
+#define SCL_DDRCLKDLY(x)	((x) << 4)
+
+/* PHY SCL START */
+#define SCL_START		BIT(28)
+#define SCL_EN			BIT(26)
+#define SCL_LUBPASS		(BIT(1) | BIT(0))
+
+#endif	/* __MICROCHIP_DDR2_REGS_H */
diff --git a/drivers/ddr/microchip/ddr2_timing.h b/drivers/ddr/microchip/ddr2_timing.h
new file mode 100644
index 0000000..5895f9d
--- /dev/null
+++ b/drivers/ddr/microchip/ddr2_timing.h
@@ -0,0 +1,65 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MICROCHIP_DDR2_TIMING_H
+#define __MICROCHIP_DDR2_TIMING_H
+
+/* MPLL freq is 400MHz */
+#define T_CK		2500    /* 2500 psec */
+#define T_CK_CTRL	(T_CK * 2)
+
+/* Burst length in cycles */
+#define BL		2
+/* default CAS latency for all speed grades */
+#define RL		5
+/* default write latency for all speed grades = CL-1 */
+#define WL		4
+
+/* From Micron MT47H64M16HR-3 data sheet */
+#define T_RFC_MIN	127500	/* psec */
+#define T_WR		15000	/* psec */
+#define T_RP		12500	/* psec */
+#define T_RCD		12500	/* psec */
+#define T_RRD		7500	/* psec */
+/* T_RRD_TCK is minimum of 2 clk periods, regardless of freq */
+#define T_RRD_TCK	2
+#define T_WTR		7500	/* psec */
+/* T_WTR_TCK is minimum of 2 clk periods, regardless of freq */
+#define T_WTR_TCK	2
+#define T_RTP		7500	/* psec */
+#define T_RTP_TCK	(BL / 2)
+#define T_XP_TCK	2	/* clocks */
+#define T_CKE_TCK	3	/* clocks */
+#define T_XSNR		(T_RFC_MIN + 10000) /* psec */
+#define T_DLLK		200     /* clocks */
+#define T_RAS_MIN	45000   /* psec */
+#define T_RC		57500   /* psec */
+#define T_FAW		35000   /* psec */
+#define T_MRD_TCK	2       /* clocks */
+#define T_RFI		7800000 /* psec */
+
+/* DDR Addressing */
+#define COL_BITS	10
+#define BA_BITS		3
+#define ROW_BITS	13
+#define CS_BITS		1
+
+/* DDR Addressing scheme: {CS, ROW, BA, COL} */
+#define COL_HI_RSHFT	0
+#define COL_HI_MASK	0
+#define COL_LO_MASK	((1 << COL_BITS) - 1)
+
+#define BA_RSHFT	COL_BITS
+#define BA_MASK		((1 << BA_BITS) - 1)
+
+#define ROW_ADDR_RSHIFT	(BA_RSHFT + BA_BITS)
+#define ROW_ADDR_MASK	((1 << ROW_BITS) - 1)
+
+#define CS_ADDR_RSHIFT	0
+#define CS_ADDR_MASK	0
+
+#endif	/* __MICROCHIP_DDR2_TIMING_H */

From be961fa15bcb01c5a50c184e3dcc3ab0379edddb Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:16 +0530
Subject: [PATCH 14/20] MIPS: Add support for Microchip PIC32MZ[DA] SoC family.

Add Microchip PIC32MZ[DA] SoC family support.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 arch/mips/dts/pic32mzda.dtsi              | 153 ++++++++++++++++++++++++++++++
 arch/mips/mach-pic32/Kconfig              |  17 +++-
 arch/mips/mach-pic32/Makefile             |   2 +-
 arch/mips/mach-pic32/cpu.c                | 143 ++++++++++++++++++++++++++++
 arch/mips/mach-pic32/include/mach/pic32.h |   3 +
 arch/mips/mach-pic32/lowlevel_init.S      |  27 ++++++
 arch/mips/mach-pic32/reset.c              |  36 +++++++
 7 files changed, 379 insertions(+), 2 deletions(-)
 create mode 100644 arch/mips/dts/pic32mzda.dtsi
 create mode 100644 arch/mips/mach-pic32/lowlevel_init.S
 create mode 100644 arch/mips/mach-pic32/reset.c

diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
new file mode 100644
index 0000000..c67cfa9
--- /dev/null
+++ b/arch/mips/dts/pic32mzda.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2015 Microchip Technology, Inc.
+ * Purna Chandra Mandal, <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/microchip,clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "microchip,pic32mzda", "microchip,pic32mz";
+
+	aliases {
+		gpio0 = &gpioA;
+		gpio1 = &gpioB;
+		gpio2 = &gpioC;
+		gpio3 = &gpioD;
+		gpio4 = &gpioE;
+		gpio5 = &gpioF;
+		gpio6 = &gpioG;
+		gpio7 = &gpioH;
+		gpio8 = &gpioJ;
+		gpio9 = &gpioK;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips14kc";
+		};
+	};
+
+	clock: clk@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		clocks = <&clock PB2CLK>;
+	};
+
+	uart2: serial@1f822200 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822200 0x50>;
+		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock PB2CLK>;
+		status = "disabled";
+	};
+
+	uart6: serial@1f822a00 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822a00 0x50>;
+		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock PB2CLK>;
+		status = "disabled";
+	};
+
+	evic: interrupt-controller@1f810000 {
+		compatible = "microchip,pic32mzda-evic";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x1f810000 0x1000>;
+	};
+
+	pinctrl: pinctrl@1f801400 {
+		compatible = "microchip,pic32mzda-pinctrl";
+		reg = <0x1f801400 0x100>, /* in  */
+		      <0x1f801500 0x200>, /* out */
+		      <0x1f860000 0xa00>; /* port */
+		reg-names = "ppsin","ppsout","port";
+		status = "disabled";
+
+		ranges = <0 0x1f860000 0xa00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gpioA: gpio0@0 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x000 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioB: gpio1@100 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x100 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioC: gpio2@200 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x200 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioD: gpio3@300 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x300 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioE: gpio4@400 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x400 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioF: gpio5@500 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x500 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioG: gpio6@600 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x600 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioH: gpio7@700 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x700 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioJ: gpio8@800 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x800 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpioK: gpio9@900 {
+			compatible = "microchip,pic32mzda-gpio";
+			reg = <0x900 0x48>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
index c1cc5e3..f636266 100644
--- a/arch/mips/mach-pic32/Kconfig
+++ b/arch/mips/mach-pic32/Kconfig
@@ -2,6 +2,21 @@ menu "Microchip PIC32 platforms"
 	depends on MACH_PIC32
 
 config SYS_SOC
-	default "none"
+	default "pic32mzda" if SOC_PIC32MZDA
+
+choice
+	prompt "PIC32 SoC select"
+
+config SOC_PIC32MZDA
+	bool "Microchip PIC32MZ[DA] family"
+	select SUPPORTS_LITTLE_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select SUPPORTS_CPU_MIPS32_R2
+	select MIPS_L1_CACHE_SHIFT_4
+	select SYS_MIPS_CACHE_INIT_RAM_LOAD
+	help
+	  This supports Microchip PIC32MZ[DA] family of microcontrollers.
+
+endchoice
 
 endmenu
diff --git a/arch/mips/mach-pic32/Makefile b/arch/mips/mach-pic32/Makefile
index cb42607..e321e65 100644
--- a/arch/mips/mach-pic32/Makefile
+++ b/arch/mips/mach-pic32/Makefile
@@ -4,4 +4,4 @@
 # SPDX-License-Identifier:      GPL-2.0+
 #
 
-obj-y = cpu.o
+obj-y = cpu.o lowlevel_init.o reset.o
\ No newline at end of file
diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
index 58fd3ab..f2ee911 100644
--- a/arch/mips/mach-pic32/cpu.c
+++ b/arch/mips/mach-pic32/cpu.c
@@ -6,8 +6,151 @@
  *
  */
 #include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <mach/pic32.h>
+#include <mach/ddr.h>
+#include <dt-bindings/clock/microchip,clock.h>
 
+/* Flash prefetch */
+#define PRECON          0x00
+
+/* Flash ECCCON */
+#define ECC_MASK	0x03
+#define ECC_SHIFT	4
+
+#define CLK_MHZ(x)	((x) / 1000000)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong clk_get_cpu_rate(void)
+{
+	int ret;
+	struct udevice *dev;
+
+	ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+	if (ret) {
+		panic("uclass-clk: device not found\n");
+		return 0;
+	}
+
+	return clk_get_rate(dev);
+}
+
+/* initialize prefetch module related to cpu_clk */
+static void prefetch_init(void)
+{
+	struct pic32_reg_atomic *regs;
+	const void __iomem *base;
+	int v, nr_waits;
+	ulong rate;
+
+	/* cpu frequency in MHZ */
+	rate = clk_get_cpu_rate() / 1000000;
+
+	/* get flash ECC type */
+	base = pic32_get_syscfg_base();
+	v = (readl(base + CFGCON) >> ECC_SHIFT) & ECC_MASK;
+
+	if (v < 2) {
+		if (rate < 66)
+			nr_waits = 0;
+		else if (rate < 133)
+			nr_waits = 1;
+		else
+			nr_waits = 2;
+	} else {
+		if (rate <= 83)
+			nr_waits = 0;
+		else if (rate <= 166)
+			nr_waits = 1;
+		else
+			nr_waits = 2;
+	}
+
+	regs = ioremap(PREFETCH_BASE + PRECON, sizeof(*regs));
+	writel(nr_waits, &regs->raw);
+
+	/* Enable prefetch for all */
+	writel(0x30, &regs->set);
+	iounmap(regs);
+}
+
+/* arch specific CPU init after DM */
+int arch_cpu_init_dm(void)
+{
+	/* flash prefetch */
+	prefetch_init();
+	return 0;
+}
+
+/* Un-gate DDR2 modules (gated by default) */
+static void ddr2_pmd_ungate(void)
+{
+	void __iomem *regs;
+
+	regs = pic32_get_syscfg_base();
+	writel(0, regs + PMD7);
+}
+
+/* initialize the DDR2 Controller and DDR2 PHY */
 phys_size_t initdram(int board_type)
 {
+	ddr2_pmd_ungate();
+	ddr2_phy_init();
+	ddr2_ctrl_init();
+	return ddr2_calculate_size();
+}
+
+int misc_init_r(void)
+{
+	set_io_port_base(0);
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+const char *get_core_name(void)
+{
+	u32 proc_id;
+	const char *str;
+
+	proc_id = read_c0_prid();
+	switch (proc_id) {
+	case 0x19e28:
+		str = "PIC32MZ[DA]";
+		break;
+	default:
+		str = "UNKNOWN";
+	}
+
+	return str;
+}
+#endif
+#ifdef CONFIG_CMD_CLK
+int soc_clk_dump(void)
+{
+	int i, ret;
+	struct udevice *dev;
+
+	ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+	if (ret) {
+		printf("clk-uclass not found\n");
+		return ret;
+	}
+
+	printf("PLL Speed: %lu MHz\n",
+	       CLK_MHZ(clk_get_periph_rate(dev, PLLCLK)));
+	printf("CPU Speed: %lu MHz\n", CLK_MHZ(clk_get_rate(dev)));
+	printf("MPLL Speed: %lu MHz\n",
+	       CLK_MHZ(clk_get_periph_rate(dev, MPLL)));
+
+	for (i = PB1CLK; i <= PB7CLK; i++)
+		printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
+		       CLK_MHZ(clk_get_periph_rate(dev, i)));
+
+	for (i = REF1CLK; i <= REF5CLK; i++)
+		printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
+		       CLK_MHZ(clk_get_periph_rate(dev, i)));
 	return 0;
 }
+#endif
diff --git a/arch/mips/mach-pic32/include/mach/pic32.h b/arch/mips/mach-pic32/include/mach/pic32.h
index 7e41810..16bfacf 100644
--- a/arch/mips/mach-pic32/include/mach/pic32.h
+++ b/arch/mips/mach-pic32/include/mach/pic32.h
@@ -73,4 +73,7 @@ static inline void __iomem *pic32_get_syscfg_base(void)
 	return (void __iomem *)CKSEG1ADDR(PIC32_CFG_BASE);
 }
 
+/* Core */
+const char *get_core_name(void);
+
 #endif	/* __PIC32_REGS_H__ */
diff --git a/arch/mips/mach-pic32/lowlevel_init.S b/arch/mips/mach-pic32/lowlevel_init.S
new file mode 100644
index 0000000..e37bebb
--- /dev/null
+++ b/arch/mips/mach-pic32/lowlevel_init.S
@@ -0,0 +1,27 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+*/
+
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm.h>
+
+LEAF(lowlevel_init)
+	/*
+	 * Establish Cause
+	 * (set IV bit)
+	 */
+	li	t1, 0x00800000
+	mtc0	t1, CP0_CAUSE
+
+	/* Establish Wired (and Random) */
+	mtc0	zero, CP0_WIRED
+	 nop
+
+	jr	ra
+	 nop
+	END(lowlevel_init)
diff --git a/arch/mips/mach-pic32/reset.c b/arch/mips/mach-pic32/reset.c
new file mode 100644
index 0000000..66c6833
--- /dev/null
+++ b/arch/mips/mach-pic32/reset.c
@@ -0,0 +1,36 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/pic32.h>
+
+/* SYSKEY */
+#define UNLOCK_KEY1	0xaa996655
+#define UNLOCK_KEY2	0x556699aa
+#define LOCK_KEY	0
+
+#define RSWRST          0x1250
+
+void _machine_restart(void)
+{
+	void __iomem *base;
+
+	base = pic32_get_syscfg_base();
+
+	/* unlock sequence */
+	writel(LOCK_KEY, base + SYSKEY);
+	writel(UNLOCK_KEY1, base + SYSKEY);
+	writel(UNLOCK_KEY2, base + SYSKEY);
+
+	/* soft reset */
+	writel(0x1, base + RSWRST);
+	(void) readl(base + RSWRST);
+
+	while (1)
+		;
+}

From 44da3a176c5bd48b7ed257454e3e551c956adb30 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:17 +0530
Subject: [PATCH 15/20] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.

This adds support for Microchip PIC32MZ[DA] StarterKit board
based on a PIC32MZ[DA] family of microcontroller.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 arch/mips/dts/Makefile                |  2 +-
 arch/mips/dts/pic32mzda_sk.dts        | 38 ++++++++++++++
 arch/mips/mach-pic32/Kconfig          | 13 +++++
 board/microchip/pic32mzda/Kconfig     | 13 +++++
 board/microchip/pic32mzda/MAINTAINERS |  6 +++
 board/microchip/pic32mzda/Makefile    |  7 +++
 board/microchip/pic32mzda/README      | 22 +++++++++
 board/microchip/pic32mzda/pic32mzda.c | 31 ++++++++++++
 configs/pic32mzdask_defconfig         | 30 +++++++++++
 include/configs/pic32mzdask.h         | 93 +++++++++++++++++++++++++++++++++++
 10 files changed, 254 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/dts/pic32mzda_sk.dts
 create mode 100644 board/microchip/pic32mzda/Kconfig
 create mode 100644 board/microchip/pic32mzda/MAINTAINERS
 create mode 100644 board/microchip/pic32mzda/Makefile
 create mode 100644 board/microchip/pic32mzda/README
 create mode 100644 board/microchip/pic32mzda/pic32mzda.c
 create mode 100644 configs/pic32mzdask_defconfig
 create mode 100644 include/configs/pic32mzdask.h

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index 47b6eb5..b513918 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-dtb-y +=
+dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
new file mode 100644
index 0000000..99e7f64
--- /dev/null
+++ b/arch/mips/dts/pic32mzda_sk.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal@microchip.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "pic32mzda.dtsi"
+
+/ {
+	model = "Microchip PIC32MZDASK";
+	compatible = "microchip,pic32mzdask", "microchip,pic32mzda";
+
+	aliases {
+		console = &uart2;
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clock {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
index f636266..2e38bb7 100644
--- a/arch/mips/mach-pic32/Kconfig
+++ b/arch/mips/mach-pic32/Kconfig
@@ -19,4 +19,17 @@ config SOC_PIC32MZDA
 
 endchoice
 
+choice
+	prompt "Board select"
+
+config TARGET_PIC32MZDASK
+	bool "Microchip PIC32MZ[DA] Starter Kit"
+	depends on SOC_PIC32MZDA
+	help
+	  This supports Microchip PIC32MZ[DA] Starter Kit.
+
+endchoice
+
+source "board/microchip/pic32mzda/Kconfig"
+
 endmenu
diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig
new file mode 100644
index 0000000..8acb393
--- /dev/null
+++ b/board/microchip/pic32mzda/Kconfig
@@ -0,0 +1,13 @@
+
+if TARGET_PIC32MZDASK
+
+config SYS_BOARD
+	default "pic32mzda"
+
+config SYS_VENDOR
+	default "microchip"
+
+config SYS_CONFIG_NAME
+	default "pic32mzdask"
+
+endif
diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS
new file mode 100644
index 0000000..c934f1a
--- /dev/null
+++ b/board/microchip/pic32mzda/MAINTAINERS
@@ -0,0 +1,6 @@
+PIC32MZDASK BOARD
+M:	Purna Chandra Mandal <purna.mandal@microchip.com>
+S:	Maintained
+F:	board/microchip/pic32mzda/
+F:	include/configs/pic32mzdask.h
+F:	configs/pic32mzdask_defconfig
diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile
new file mode 100644
index 0000000..3629530
--- /dev/null
+++ b/board/microchip/pic32mzda/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2015
+# Purna Chandra Mandal, purna.mandal@microchip.com.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+obj-y := pic32mzda.o
diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README
new file mode 100644
index 0000000..91d16ab
--- /dev/null
+++ b/board/microchip/pic32mzda/README
@@ -0,0 +1,22 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ */
+
+PIC32MZ[DA] Starter Kit
+----------------------------------------
+PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
+This family is powered by MIPS M14KEC 32bit general purpose core and has
+advanced microcontroller features and peripherals.
+
+This processor boots with proprietary stage1 bootloader running from internal
+boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
+on internal program-flash. Finally U-Boot loads OS image (along with other
+required files for booting) from either uSD card, or ethernet, or from USB
+storage.
+
+To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
+environment file), uImage, *.dtb (platform device-tree-blob file).
+
+U-Boot jumps to Linux using UHI specification.
+
+Visit http://microchip.com for details.
diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c
new file mode 100644
index 0000000..afe2ab8
--- /dev/null
+++ b/board/microchip/pic32mzda/pic32mzda.c
@@ -0,0 +1,31 @@
+/*
+ * Microchip PIC32MZ[DA] Starter Kit board
+ *
+ * Copyright (C) 2015, Microchip Technology Inc.
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <mach/pic32.h>
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	ulong rate = 0;
+	struct udevice *dev;
+
+	printf("Core: %s\n", get_core_name());
+
+	if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
+		rate = clk_get_rate(dev);
+		printf("CPU Speed: %lu MHz\n", rate / 1000000);
+	}
+
+	return 0;
+}
+#endif
diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
new file mode 100644
index 0000000..1c968fc
--- /dev/null
+++ b/configs/pic32mzdask_defconfig
@@ -0,0 +1,30 @@
+CONFIG_MIPS=y
+CONFIG_SYS_MALLOC_F_LEN=0x600
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_MACH_PIC32=y
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="dask # "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_SAVEENV is not set
+CONFIG_LOOPW=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_SYS_VSNPRINTF=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_REGEX=y
+CONFIG_CMD_DHRYSTONE=y
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
new file mode 100644
index 0000000..5ba2a19
--- /dev/null
+++ b/include/configs/pic32mzdask.h
@@ -0,0 +1,93 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Microchip PIC32MZ[DA] Starter Kit.
+ */
+
+#ifndef __PIC32MZDASK_CONFIG_H
+#define __PIC32MZDASK_CONFIG_H
+
+/* System Configuration */
+#define CONFIG_SYS_TEXT_BASE		0x9d004000 /* .text */
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*--------------------------------------------
+ * CPU configuration
+ */
+/* CPU Timer rate */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	100000000
+
+/* Cache Configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE	CONF_CM_CACHABLE_NONCOHERENT
+
+/*----------------------------------------------------------------------
+ * Memory Layout
+ */
+#define CONFIG_SYS_SRAM_BASE		0x80000000
+#define CONFIG_SYS_SRAM_SIZE		0x00080000 /* 512K */
+
+/* Initial RAM for temporary stack, global data */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_RAM_ADDR	\
+	(CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
+
+/* SDRAM Configuration (for final code, data, stack, heap) */
+#define CONFIG_SYS_SDRAM_BASE		0x88000000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(4 << 10)
+#define CONFIG_STACKSIZE		(4 << 10) /* regular stack */
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
+
+#define CONFIG_SYS_LOAD_ADDR		0x88500000 /* default load address */
+#define CONFIG_SYS_ENV_ADDR		0x88300000
+
+/* Memory Test */
+#define CONFIG_SYS_MEMTEST_START	0x88000000
+#define CONFIG_SYS_MEMTEST_END		0x88080000
+
+/*----------------------------------------------------------------------
+ * Commands
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_CMD_CLK
+
+/*-------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*------------------------------------------------------------
+ * Console Configuration
+ */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_CBSIZE		1024 /* Console I/O Buffer Size   */
+#define CONFIG_SYS_MAXARGS		16   /* max number of command args*/
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING		1
+
+/*
+ * Handover flattened device tree (dtb file) to Linux kernel
+ */
+#define CONFIG_OF_LIBFDT	1
+
+/* -------------------------------------------------
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE	1
+#define CONFIG_ENV_SIZE		0x4000
+
+/* ---------------------------------------------------------------------
+ * Board boot configuration
+ */
+#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
+#define CONFIG_BOOTDELAY	5 /* autoboot after X seconds     */
+#undef	CONFIG_BOOTARGS
+
+#endif	/* __PIC32MZDASK_CONFIG_H */

From 102142c9e01f1b40b02db5239710bf37f4a17293 Mon Sep 17 00:00:00 2001
From: Andrei Pistirica <andrei.pistirica@microchip.com>
Date: Thu, 28 Jan 2016 15:30:18 +0530
Subject: [PATCH 16/20] drivers: mmc: add driver for Microchip PIC32 SDHCI
 controller.

This driver implements platform specific glue and fixups for
PIC32 internal SDHCI controller.

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
 drivers/mmc/Kconfig       |  6 +++++
 drivers/mmc/Makefile      |  2 +-
 drivers/mmc/pic32_sdhci.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/sdhci.c       |  7 ++++++
 4 files changed, 72 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mmc/pic32_sdhci.c

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ceae7bc..9f4b766 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -31,4 +31,10 @@ config SH_SDHI
 	help
 	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
 
+config PIC32_SDHCI
+	bool "Microchip PIC32 on-chip SDHCI support"
+	depends on DM_MMC && MACH_PIC32
+	help
+	  Support for Microchip PIC32 SDHCI controller.
+
 endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 5d35705..c9c3e3e 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -48,4 +48,4 @@ obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
 else
 obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
 endif
-
+obj-$(CONFIG_PIC32_SDHCI) += pic32_sdhci.o
diff --git a/drivers/mmc/pic32_sdhci.c b/drivers/mmc/pic32_sdhci.c
new file mode 100644
index 0000000..28da55d
--- /dev/null
+++ b/drivers/mmc/pic32_sdhci.c
@@ -0,0 +1,58 @@
+/*
+ * Support of SDHCI for Microchip PIC32 SoC.
+ *
+ * Copyright (C) 2015 Microchip Technology Inc.
+ * Andrei Pistirica <andrei.pistirica@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dm.h>
+#include <common.h>
+#include <sdhci.h>
+#include <asm/errno.h>
+#include <mach/pic32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int pic32_sdhci_probe(struct udevice *dev)
+{
+	struct sdhci_host *host = dev_get_priv(dev);
+	const void *fdt = gd->fdt_blob;
+	u32 f_min_max[2];
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = fdtdec_get_addr_size(fdt, dev->of_offset, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	host->ioaddr	= ioremap(addr, size);
+	host->name	= (char *)dev->name;
+	host->quirks	= SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_NO_CD;
+	host->bus_width	= fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+					"bus-width", 4);
+
+	ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
+				   "clock-freq-min-max", f_min_max, 2);
+	if (ret) {
+		printf("sdhci: clock-freq-min-max not found\n");
+		return ret;
+	}
+
+	return add_sdhci(host, f_min_max[1], f_min_max[0]);
+}
+
+static const struct udevice_id pic32_sdhci_ids[] = {
+	{ .compatible = "microchip,pic32mzda-sdhci" },
+	{ }
+};
+
+U_BOOT_DRIVER(pic32_sdhci_drv) = {
+	.name			= "pic32_sdhci",
+	.id			= UCLASS_MMC,
+	.of_match		= pic32_sdhci_ids,
+	.probe			= pic32_sdhci_probe,
+	.priv_auto_alloc_size	= sizeof(struct sdhci_host),
+};
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index ff770b1..8586d89 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -443,6 +443,12 @@ static int sdhci_init(struct mmc *mmc)
 	sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
 
 	if (host->quirks & SDHCI_QUIRK_NO_CD) {
+#if defined(CONFIG_PIC32_SDHCI)
+		/* PIC32 SDHCI CD errata:
+		 * - set CD_TEST and clear CD_TEST_INS bit
+		 */
+		sdhci_writeb(host, SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL);
+#else
 		unsigned int status;
 
 		sdhci_writeb(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST,
@@ -453,6 +459,7 @@ static int sdhci_init(struct mmc *mmc)
 		    (!(status & SDHCI_CARD_STATE_STABLE)) ||
 		    (!(status & SDHCI_CARD_DETECT_PIN_LEVEL)))
 			status = sdhci_readl(host, SDHCI_PRESENT_STATE);
+#endif
 	}
 
 	/* Enable only interrupts served by the SD controller */

From c76eb72c43ac3ef4518dac4bee653b769d95e63e Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:19 +0530
Subject: [PATCH 17/20] board: add SDHCI support for PIC32MZDASK board.

Enable MMC, SDHCI, FAT_FS support for PIC32MZ[DA] StarterKit.
Also add custom scripts, rules to boot Linux from microSD card.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
 arch/mips/dts/pic32mzda.dtsi   | 11 ++++++++
 arch/mips/dts/pic32mzda_sk.dts |  7 +++++
 configs/pic32mzdask_defconfig  |  3 ++-
 include/configs/pic32mzdask.h  | 59 ++++++++++++++++++++++++++++++++++++++++--
 4 files changed, 77 insertions(+), 3 deletions(-)

diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
index c67cfa9..f1894ec 100644
--- a/arch/mips/dts/pic32mzda.dtsi
+++ b/arch/mips/dts/pic32mzda.dtsi
@@ -150,4 +150,15 @@
 			#gpio-cells = <2>;
 		};
 	};
+
+	sdhci: sdhci@1f8ec000 {
+		compatible = "microchip,pic32mzda-sdhci";
+		reg = <0x1f8ec000 0x100>;
+		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock REF4CLK>, <&clock PB5CLK>;
+		clock-names = "base_clk", "sys_clk";
+		clock-freq-min-max = <25000000>,<25000000>;
+		bus-width = <4>;
+		status = "disabled";
+	};
 };
diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
index 99e7f64..f886a0f 100644
--- a/arch/mips/dts/pic32mzda_sk.dts
+++ b/arch/mips/dts/pic32mzda_sk.dts
@@ -23,6 +23,9 @@
 };
 
 &clock {
+	microchip,refo2-frequency = <50000000>;
+	microchip,refo4-frequency = <25000000>;
+	microchip,refo5-frequency = <40000000>;
 	status = "okay";
 	u-boot,dm-pre-reloc;
 };
@@ -36,3 +39,7 @@
 	status = "okay";
 	u-boot,dm-pre-reloc;
 };
+
+&sdhci {
+	status = "okay";
+};
\ No newline at end of file
diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
index 1c968fc..55ba3f8 100644
--- a/configs/pic32mzdask_defconfig
+++ b/configs/pic32mzdask_defconfig
@@ -9,7 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="dask # "
 # CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_SAVEENV is not set
 CONFIG_LOOPW=y
 CONFIG_CMD_MEMTEST=y
@@ -22,6 +21,8 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_TIME=y
 CONFIG_OF_EMBED=y
 CONFIG_CLK=y
+CONFIG_DM_MMC=y
+CONFIG_PIC32_SDHCI=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_SYS_VSNPRINTF=y
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index 5ba2a19..b258038 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -46,6 +46,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x88500000 /* default load address */
 #define CONFIG_SYS_ENV_ADDR		0x88300000
+#define CONFIG_SYS_FDT_ADDR		0x89d00000
 
 /* Memory Test */
 #define CONFIG_SYS_MEMTEST_START	0x88000000
@@ -77,6 +78,33 @@
  */
 #define CONFIG_OF_LIBFDT	1
 
+/*-----------------------------------------------------------------------
+ * SDHC Configuration
+ */
+#define CONFIG_SDHCI
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+
+/*-----------------------------------------------------------------------
+ * File System Configuration
+ */
+/* FAT FS */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_SUPPORT_VFAT
+#define CONFIG_FS_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_FAT
+
+/* EXT4 FS */
+#define CONFIG_FS_EXT4
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
 /* -------------------------------------------------
  * Environment
  */
@@ -87,7 +115,34 @@
  * Board boot configuration
  */
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-#define CONFIG_BOOTDELAY	5 /* autoboot after X seconds     */
-#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTDELAY	5
+
+#define MEM_LAYOUT_ENV_SETTINGS					\
+	"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"	\
+	"fdt_addr_r="__stringify(CONFIG_SYS_FDT_ADDR)"\0"	\
+	"scriptaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0"
+
+#define CONFIG_LEGACY_BOOTCMD_ENV					\
+	"legacy_bootcmd= "						\
+		"if load mmc 0 ${scriptaddr} uEnv.txt; then "		\
+			"env import -tr ${scriptaddr} ${filesize}; "	\
+			"if test -n \"${bootcmd_uenv}\" ; then "	\
+				"echo Running bootcmd_uenv ...; "	\
+				"run bootcmd_uenv; "			\
+			"fi; "						\
+		"fi; \0"
+
+#define BOOT_TARGET_DEVICES(func)	\
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	MEM_LAYOUT_ENV_SETTINGS		\
+	CONFIG_LEGACY_BOOTCMD_ENV	\
+	BOOTENV
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND	"run distro_bootcmd || run legacy_bootcmd"
 
 #endif	/* __PIC32MZDASK_CONFIG_H */

From 46c9d938ca9d603fb5bf4ed8443d51c5b283fc89 Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:20 +0530
Subject: [PATCH 18/20] drivers: net: phy: add SMSC LAN8740 Phy support.

Add SMSC LAN8740 Phy support required for PIC32MZDA devices.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---
 drivers/net/phy/smsc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index bfd9815..34986a2 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -69,11 +69,21 @@ static struct phy_driver lan8710_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver lan8740_driver = {
+	.name = "SMSC LAN8740",
+	.uid = 0x0007c110,
+	.mask = 0xffff0,
+	.features = PHY_BASIC_FEATURES,
+	.config = &genphy_config_aneg,
+	.startup = &genphy_startup,
+	.shutdown = &genphy_shutdown,
+};
 int phy_smsc_init(void)
 {
 	phy_register(&lan8710_driver);
 	phy_register(&lan911x_driver);
 	phy_register(&lan8700_driver);
+	phy_register(&lan8740_driver);
 
 	return 0;
 }

From 23e7578c9b17a5af8804ee2df8e52b9324651b6d Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:21 +0530
Subject: [PATCH 19/20] drivers: net: Add ethernet driver for Microchip PIC32.

This driver implements MAC and MII layer of the ethernet controller.
Network data transfer is handled by controller internal DMA engine.
Ethernet controller is configurable through device-tree file.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
 drivers/net/Kconfig      |   8 +
 drivers/net/Makefile     |   1 +
 drivers/net/pic32_eth.c  | 605 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/pic32_eth.h  | 164 +++++++++++++
 drivers/net/pic32_mdio.c | 121 ++++++++++
 5 files changed, 899 insertions(+)
 create mode 100644 drivers/net/pic32_eth.c
 create mode 100644 drivers/net/pic32_eth.h
 create mode 100644 drivers/net/pic32_mdio.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 218e1fe..bc2f51d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -125,4 +125,12 @@ config ZYNQ_GEM
 	help
 	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.
 
+config PIC32_ETH
+	bool "Microchip PIC32 Ethernet Support"
+	depends on DM_ETH && MACH_PIC32
+	select PHYLIB
+	help
+	  This driver implements 10/100 Mbps Ethernet and MAC layer for
+	  Microchip PIC32 microcontrollers.
+
 endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 150470c..33a81ee 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -72,3 +72,4 @@ obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
 obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/
 obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o
 obj-$(CONFIG_VSC9953) += vsc9953.o
+obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
diff --git a/drivers/net/pic32_eth.c b/drivers/net/pic32_eth.c
new file mode 100644
index 0000000..167af8b
--- /dev/null
+++ b/drivers/net/pic32_eth.c
@@ -0,0 +1,605 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#include <common.h>
+#include <errno.h>
+#include <dm.h>
+#include <net.h>
+#include <miiphy.h>
+#include <console.h>
+#include <wait_bit.h>
+#include <asm/gpio.h>
+
+#include "pic32_eth.h"
+
+#define MAX_RX_BUF_SIZE		1536
+#define MAX_RX_DESCR		PKTBUFSRX
+#define MAX_TX_DESCR		2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct pic32eth_dev {
+	struct eth_dma_desc rxd_ring[MAX_RX_DESCR];
+	struct eth_dma_desc txd_ring[MAX_TX_DESCR];
+	u32 rxd_idx; /* index of RX desc to read */
+	/* regs */
+	struct pic32_ectl_regs *ectl_regs;
+	struct pic32_emac_regs *emac_regs;
+	/* Phy */
+	struct phy_device *phydev;
+	phy_interface_t phyif;
+	u32 phy_addr;
+	struct gpio_desc rst_gpio;
+};
+
+void __weak board_netphy_reset(void *dev)
+{
+	struct pic32eth_dev *priv = dev;
+
+	if (!dm_gpio_is_valid(&priv->rst_gpio))
+		return;
+
+	/* phy reset */
+	dm_gpio_set_value(&priv->rst_gpio, 0);
+	udelay(300);
+	dm_gpio_set_value(&priv->rst_gpio, 1);
+	udelay(300);
+}
+
+/* Initialize mii(MDIO) interface, discover which PHY is
+ * attached to the device, and configure it properly.
+ */
+static int pic32_mii_init(struct pic32eth_dev *priv)
+{
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	struct pic32_emac_regs *emac_p = priv->emac_regs;
+
+	/* board phy reset */
+	board_netphy_reset(priv);
+
+	/* disable RX, TX & all transactions */
+	writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
+
+	/* wait till busy */
+	wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
+		     CONFIG_SYS_HZ, false);
+
+	/* turn controller ON to access PHY over MII */
+	writel(ETHCON_ON, &ectl_p->con1.set);
+
+	mdelay(10);
+
+	/* reset MAC */
+	writel(EMAC_SOFTRESET, &emac_p->cfg1.set); /* reset assert */
+	mdelay(10);
+	writel(EMAC_SOFTRESET, &emac_p->cfg1.clr); /* reset deassert */
+
+	/* initialize MDIO/MII */
+	if (priv->phyif == PHY_INTERFACE_MODE_RMII) {
+		writel(EMAC_RMII_RESET, &emac_p->supp.set);
+		mdelay(10);
+		writel(EMAC_RMII_RESET, &emac_p->supp.clr);
+	}
+
+	return pic32_mdio_init(PIC32_MDIO_NAME, (ulong)&emac_p->mii);
+}
+
+static int pic32_phy_init(struct pic32eth_dev *priv, struct udevice *dev)
+{
+	struct mii_dev *mii;
+
+	mii = miiphy_get_dev_by_name(PIC32_MDIO_NAME);
+
+	/* find & connect PHY */
+	priv->phydev = phy_connect(mii, priv->phy_addr,
+				   dev, priv->phyif);
+	if (!priv->phydev) {
+		printf("%s: %s: Error, PHY connect\n", __FILE__, __func__);
+		return 0;
+	}
+
+	/* Wait for phy to complete reset */
+	mdelay(10);
+
+	/* configure supported modes */
+	priv->phydev->supported = SUPPORTED_10baseT_Half |
+				  SUPPORTED_10baseT_Full |
+				  SUPPORTED_100baseT_Half |
+				  SUPPORTED_100baseT_Full |
+				  SUPPORTED_Autoneg;
+
+	priv->phydev->advertising = ADVERTISED_10baseT_Half |
+				    ADVERTISED_10baseT_Full |
+				    ADVERTISED_100baseT_Half |
+				    ADVERTISED_100baseT_Full |
+				    ADVERTISED_Autoneg;
+
+	priv->phydev->autoneg = AUTONEG_ENABLE;
+
+	return 0;
+}
+
+/* Configure MAC based on negotiated speed and duplex
+ * reported by PHY.
+ */
+static int pic32_mac_adjust_link(struct pic32eth_dev *priv)
+{
+	struct phy_device *phydev = priv->phydev;
+	struct pic32_emac_regs *emac_p = priv->emac_regs;
+
+	if (!phydev->link) {
+		printf("%s: No link.\n", phydev->dev->name);
+		return -EINVAL;
+	}
+
+	if (phydev->duplex) {
+		writel(EMAC_FULLDUP, &emac_p->cfg2.set);
+		writel(FULLDUP_GAP_TIME, &emac_p->ipgt.raw);
+	} else {
+		writel(EMAC_FULLDUP, &emac_p->cfg2.clr);
+		writel(HALFDUP_GAP_TIME, &emac_p->ipgt.raw);
+	}
+
+	switch (phydev->speed) {
+	case SPEED_100:
+		writel(EMAC_RMII_SPD100, &emac_p->supp.set);
+		break;
+	case SPEED_10:
+		writel(EMAC_RMII_SPD100, &emac_p->supp.clr);
+		break;
+	default:
+		printf("%s: Speed was bad\n", phydev->dev->name);
+		return -EINVAL;
+	}
+
+	printf("pic32eth: PHY is %s with %dbase%s, %s\n",
+	       phydev->drv->name, phydev->speed,
+	       (phydev->port == PORT_TP) ? "T" : "X",
+	       (phydev->duplex) ? "full" : "half");
+
+	return 0;
+}
+
+static void pic32_mac_init(struct pic32eth_dev *priv, u8 *macaddr)
+{
+	struct pic32_emac_regs *emac_p = priv->emac_regs;
+	u32 stat = 0, v;
+	u64 expire;
+
+	v = EMAC_TXPAUSE | EMAC_RXPAUSE | EMAC_RXENABLE;
+	writel(v, &emac_p->cfg1.raw);
+
+	v = EMAC_EXCESS | EMAC_AUTOPAD | EMAC_PADENABLE |
+	    EMAC_CRCENABLE | EMAC_LENGTHCK | EMAC_FULLDUP;
+	writel(v, &emac_p->cfg2.raw);
+
+	/* recommended back-to-back inter-packet gap for 10 Mbps half duplex */
+	writel(HALFDUP_GAP_TIME, &emac_p->ipgt.raw);
+
+	/* recommended non-back-to-back interpacket gap is 0xc12 */
+	writel(0xc12, &emac_p->ipgr.raw);
+
+	/* recommended collision window retry limit is 0x370F */
+	writel(0x370f, &emac_p->clrt.raw);
+
+	/* set maximum frame length: allow VLAN tagged frame */
+	writel(0x600, &emac_p->maxf.raw);
+
+	/* set the mac address */
+	writel(macaddr[0] | (macaddr[1] << 8), &emac_p->sa2.raw);
+	writel(macaddr[2] | (macaddr[3] << 8), &emac_p->sa1.raw);
+	writel(macaddr[4] | (macaddr[5] << 8), &emac_p->sa0.raw);
+
+	/* default, enable 10 Mbps operation */
+	writel(EMAC_RMII_SPD100, &emac_p->supp.clr);
+
+	/* wait until link status UP or deadline elapsed */
+	expire = get_ticks() + get_tbclk() * 2;
+	for (; get_ticks() < expire;) {
+		stat = phy_read(priv->phydev, priv->phy_addr, MII_BMSR);
+		if (stat & BMSR_LSTATUS)
+			break;
+	}
+
+	if (!(stat & BMSR_LSTATUS))
+		printf("MAC: Link is DOWN!\n");
+
+	/* delay to stabilize before any tx/rx */
+	mdelay(10);
+}
+
+static void pic32_mac_reset(struct pic32eth_dev *priv)
+{
+	struct pic32_emac_regs *emac_p = priv->emac_regs;
+	struct mii_dev *mii;
+
+	/* Reset MAC */
+	writel(EMAC_SOFTRESET, &emac_p->cfg1.raw);
+	mdelay(10);
+
+	/* clear reset */
+	writel(0, &emac_p->cfg1.raw);
+
+	/* Reset MII */
+	mii = priv->phydev->bus;
+	if (mii && mii->reset)
+		mii->reset(mii);
+}
+
+/* initializes the MAC and PHY, then establishes a link */
+static void pic32_ctrl_reset(struct pic32eth_dev *priv)
+{
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	u32 v;
+
+	/* disable RX, TX & any other transactions */
+	writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
+
+	/* wait till busy */
+	wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
+		     CONFIG_SYS_HZ, false);
+	/* decrement received buffcnt to zero. */
+	while (readl(&ectl_p->stat.raw) & ETHSTAT_BUFCNT)
+		writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
+
+	/* clear any existing interrupt event */
+	writel(0xffffffff, &ectl_p->irq.clr);
+
+	/* clear RX/TX start address */
+	writel(0xffffffff, &ectl_p->txst.clr);
+	writel(0xffffffff, &ectl_p->rxst.clr);
+
+	/* clear the receive filters */
+	writel(0x00ff, &ectl_p->rxfc.clr);
+
+	/* set the receive filters
+	 * ETH_FILT_CRC_ERR_REJECT
+	 * ETH_FILT_RUNT_REJECT
+	 * ETH_FILT_UCAST_ACCEPT
+	 * ETH_FILT_MCAST_ACCEPT
+	 * ETH_FILT_BCAST_ACCEPT
+	 */
+	v = ETHRXFC_BCEN | ETHRXFC_MCEN | ETHRXFC_UCEN |
+	    ETHRXFC_RUNTEN | ETHRXFC_CRCOKEN;
+	writel(v, &ectl_p->rxfc.set);
+
+	/* turn controller ON to access PHY over MII */
+	writel(ETHCON_ON, &ectl_p->con1.set);
+}
+
+static void pic32_rx_desc_init(struct pic32eth_dev *priv)
+{
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	struct eth_dma_desc *rxd;
+	u32 idx, bufsz;
+
+	priv->rxd_idx = 0;
+	for (idx = 0; idx < MAX_RX_DESCR; idx++) {
+		rxd = &priv->rxd_ring[idx];
+
+		/* hw owned */
+		rxd->hdr = EDH_NPV | EDH_EOWN | EDH_STICKY;
+
+		/* packet buffer address */
+		rxd->data_buff = virt_to_phys(net_rx_packets[idx]);
+
+		/* link to next desc */
+		rxd->next_ed = virt_to_phys(rxd + 1);
+
+		/* reset status */
+		rxd->stat1 = 0;
+		rxd->stat2 = 0;
+
+		/* decrement bufcnt */
+		writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
+	}
+
+	/* link last descr to beginning of list */
+	rxd->next_ed = virt_to_phys(&priv->rxd_ring[0]);
+
+	/* flush rx ring */
+	flush_dcache_range((ulong)priv->rxd_ring,
+			   (ulong)priv->rxd_ring + sizeof(priv->rxd_ring));
+
+	/* set rx desc-ring start address */
+	writel((ulong)virt_to_phys(&priv->rxd_ring[0]), &ectl_p->rxst.raw);
+
+	/* RX Buffer size */
+	bufsz = readl(&ectl_p->con2.raw);
+	bufsz &= ~(ETHCON_RXBUFSZ << ETHCON_RXBUFSZ_SHFT);
+	bufsz |= ((MAX_RX_BUF_SIZE / 16) << ETHCON_RXBUFSZ_SHFT);
+	writel(bufsz, &ectl_p->con2.raw);
+
+	/* enable the receiver in hardware which allows hardware
+	 * to DMA received pkts to the descriptor pointer address.
+	 */
+	writel(ETHCON_RXEN, &ectl_p->con1.set);
+}
+
+static int pic32_eth_start(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+
+	/* controller */
+	pic32_ctrl_reset(priv);
+
+	/* reset MAC */
+	pic32_mac_reset(priv);
+
+	/* configure PHY */
+	phy_config(priv->phydev);
+
+	/* initialize MAC */
+	pic32_mac_init(priv, &pdata->enetaddr[0]);
+
+	/* init RX descriptor; TX descriptors are handled in xmit */
+	pic32_rx_desc_init(priv);
+
+	/* Start up & update link status of PHY */
+	phy_startup(priv->phydev);
+
+	/* adjust mac with phy link status */
+	return pic32_mac_adjust_link(priv);
+}
+
+static void pic32_eth_stop(struct udevice *dev)
+{
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	struct pic32_emac_regs *emac_p = priv->emac_regs;
+
+	/* Reset the phy if the controller is enabled */
+	if (readl(&ectl_p->con1.raw) & ETHCON_ON)
+		phy_reset(priv->phydev);
+
+	/* Shut down the PHY */
+	phy_shutdown(priv->phydev);
+
+	/* Stop rx/tx */
+	writel(ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
+	mdelay(10);
+
+	/* reset MAC */
+	writel(EMAC_SOFTRESET, &emac_p->cfg1.raw);
+
+	/* clear reset */
+	writel(0, &emac_p->cfg1.raw);
+	mdelay(10);
+
+	/* disable controller */
+	writel(ETHCON_ON, &ectl_p->con1.clr);
+	mdelay(10);
+
+	/* wait until everything is down */
+	wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
+		     2 * CONFIG_SYS_HZ, false);
+
+	/* clear any existing interrupt event */
+	writel(0xffffffff, &ectl_p->irq.clr);
+}
+
+static int pic32_eth_send(struct udevice *dev, void *packet, int length)
+{
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	struct eth_dma_desc *txd;
+	u64 deadline;
+
+	txd = &priv->txd_ring[0];
+
+	/* set proper flags & length in descriptor header */
+	txd->hdr = EDH_SOP | EDH_EOP | EDH_EOWN | EDH_BCOUNT(length);
+
+	/* pass buffer address to hardware */
+	txd->data_buff = virt_to_phys(packet);
+
+	debug("%s: %d / .hdr %x, .data_buff %x, .stat %x, .nexted %x\n",
+	      __func__, __LINE__, txd->hdr, txd->data_buff, txd->stat2,
+	      txd->next_ed);
+
+	/* cache flush (packet) */
+	flush_dcache_range((ulong)packet, (ulong)packet + length);
+
+	/* cache flush (txd) */
+	flush_dcache_range((ulong)txd, (ulong)txd + sizeof(*txd));
+
+	/* pass descriptor table base to h/w */
+	writel(virt_to_phys(txd), &ectl_p->txst.raw);
+
+	/* ready to send enabled, hardware can now send the packet(s) */
+	writel(ETHCON_TXRTS | ETHCON_ON, &ectl_p->con1.set);
+
+	/* wait until tx has completed and h/w has released ownership
+	 * of the tx descriptor or timeout elapsed.
+	 */
+	deadline = get_ticks() + get_tbclk();
+	for (;;) {
+		/* check timeout */
+		if (get_ticks() > deadline)
+			return -ETIMEDOUT;
+
+		if (ctrlc())
+			return -EINTR;
+
+		/* tx completed ? */
+		if (readl(&ectl_p->con1.raw) & ETHCON_TXRTS) {
+			udelay(1);
+			continue;
+		}
+
+		/* h/w not released ownership yet? */
+		invalidate_dcache_range((ulong)txd, (ulong)txd + sizeof(*txd));
+		if (!(txd->hdr & EDH_EOWN))
+			break;
+	}
+
+	return 0;
+}
+
+static int pic32_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	struct eth_dma_desc *rxd;
+	u32 idx = priv->rxd_idx;
+	u32 rx_count;
+
+	/* find the next ready to receive */
+	rxd = &priv->rxd_ring[idx];
+
+	invalidate_dcache_range((ulong)rxd, (ulong)rxd + sizeof(*rxd));
+	/* check if owned by MAC */
+	if (rxd->hdr & EDH_EOWN)
+		return -EAGAIN;
+
+	/* Sanity check on header: SOP and EOP  */
+	if ((rxd->hdr & (EDH_SOP | EDH_EOP)) != (EDH_SOP | EDH_EOP)) {
+		printf("%s: %s, rx pkt across multiple descr\n",
+		       __FILE__, __func__);
+		return 0;
+	}
+
+	debug("%s: %d /idx %i, hdr=%x, data_buff %x, stat %x, nexted %x\n",
+	      __func__, __LINE__, idx, rxd->hdr,
+	      rxd->data_buff, rxd->stat2, rxd->next_ed);
+
+	/* Sanity check on rx_stat: OK, CRC */
+	if (!RSV_RX_OK(rxd->stat2) || RSV_CRC_ERR(rxd->stat2)) {
+		debug("%s: %s: Error, rx problem detected\n",
+		      __FILE__, __func__);
+		return 0;
+	}
+
+	/* invalidate dcache */
+	rx_count = RSV_RX_COUNT(rxd->stat2);
+	invalidate_dcache_range((ulong)net_rx_packets[idx],
+				(ulong)net_rx_packets[idx] + rx_count);
+
+	/* Pass the packet to protocol layer */
+	*packetp = net_rx_packets[idx];
+
+	/* increment number of bytes rcvd (ignore CRC) */
+	return rx_count - 4;
+}
+
+static int pic32_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
+	struct eth_dma_desc *rxd;
+	int idx = priv->rxd_idx;
+
+	/* sanity check */
+	if (packet != net_rx_packets[idx]) {
+		printf("rxd_id %d: packet is not matched,\n", idx);
+		return -EAGAIN;
+	}
+
+	/* prepare for receive */
+	rxd = &priv->rxd_ring[idx];
+	rxd->hdr = EDH_STICKY | EDH_NPV | EDH_EOWN;
+
+	flush_dcache_range((ulong)rxd, (ulong)rxd + sizeof(*rxd));
+
+	/* decrement rx pkt count */
+	writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
+
+	debug("%s: %d / idx %i, hdr %x, data_buff %x, stat %x, nexted %x\n",
+	      __func__, __LINE__, idx, rxd->hdr, rxd->data_buff,
+	      rxd->stat2, rxd->next_ed);
+
+	priv->rxd_idx = (priv->rxd_idx + 1) % MAX_RX_DESCR;
+
+	return 0;
+}
+
+static const struct eth_ops pic32_eth_ops = {
+	.start		= pic32_eth_start,
+	.send		= pic32_eth_send,
+	.recv		= pic32_eth_recv,
+	.free_pkt	= pic32_eth_free_pkt,
+	.stop		= pic32_eth_stop,
+};
+
+static int pic32_eth_probe(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	const char *phy_mode;
+	void __iomem *iobase;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int offset = 0;
+	int phy_addr = -1;
+
+	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	iobase = ioremap(addr, size);
+	pdata->iobase = (phys_addr_t)addr;
+
+	/* get phy mode */
+	pdata->phy_interface = -1;
+	phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+	if (phy_mode)
+		pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+	if (pdata->phy_interface == -1) {
+		debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+		return -EINVAL;
+	}
+
+	/* get phy addr */
+	offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
+				       "phy-handle");
+	if (offset > 0)
+		phy_addr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
+
+	/* phy reset gpio */
+	gpio_request_by_name_nodev(gd->fdt_blob, dev->of_offset,
+				   "reset-gpios", 0,
+				   &priv->rst_gpio, GPIOD_IS_OUT);
+
+	priv->phyif	= pdata->phy_interface;
+	priv->phy_addr	= phy_addr;
+	priv->ectl_regs	= iobase;
+	priv->emac_regs	= iobase + PIC32_EMAC1CFG1;
+
+	pic32_mii_init(priv);
+
+	return pic32_phy_init(priv, dev);
+}
+
+static int pic32_eth_remove(struct udevice *dev)
+{
+	struct pic32eth_dev *priv = dev_get_priv(dev);
+	struct mii_dev *bus;
+
+	dm_gpio_free(dev, &priv->rst_gpio);
+	phy_shutdown(priv->phydev);
+	free(priv->phydev);
+	bus = miiphy_get_dev_by_name(PIC32_MDIO_NAME);
+	mdio_unregister(bus);
+	mdio_free(bus);
+	iounmap(priv->ectl_regs);
+	return 0;
+}
+
+static const struct udevice_id pic32_eth_ids[] = {
+	{ .compatible = "microchip,pic32mzda-eth" },
+	{ }
+};
+
+U_BOOT_DRIVER(pic32_ethernet) = {
+	.name			= "pic32_ethernet",
+	.id			= UCLASS_ETH,
+	.of_match		= pic32_eth_ids,
+	.probe			= pic32_eth_probe,
+	.remove			= pic32_eth_remove,
+	.ops			= &pic32_eth_ops,
+	.priv_auto_alloc_size	= sizeof(struct pic32eth_dev),
+	.platdata_auto_alloc_size	= sizeof(struct eth_pdata),
+};
diff --git a/drivers/net/pic32_eth.h b/drivers/net/pic32_eth.h
new file mode 100644
index 0000000..be2a187
--- /dev/null
+++ b/drivers/net/pic32_eth.h
@@ -0,0 +1,164 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MICROCHIP_PIC32_ETH_H_
+#define __MICROCHIP_PIC32_ETH_H_
+
+#include <mach/pic32.h>
+
+/* Ethernet */
+struct pic32_ectl_regs {
+	struct pic32_reg_atomic con1; /* 0x00 */
+	struct pic32_reg_atomic con2; /* 0x10 */
+	struct pic32_reg_atomic txst; /* 0x20 */
+	struct pic32_reg_atomic rxst; /* 0x30 */
+	struct pic32_reg_atomic ht0;  /* 0x40 */
+	struct pic32_reg_atomic ht1;  /* 0x50 */
+	struct pic32_reg_atomic pmm0; /* 0x60 */
+	struct pic32_reg_atomic pmm1; /* 0x70 */
+	struct pic32_reg_atomic pmcs; /* 0x80 */
+	struct pic32_reg_atomic pmo;  /* 0x90 */
+	struct pic32_reg_atomic rxfc; /* 0xa0 */
+	struct pic32_reg_atomic rxwm; /* 0xb0 */
+	struct pic32_reg_atomic ien;  /* 0xc0 */
+	struct pic32_reg_atomic irq;  /* 0xd0 */
+	struct pic32_reg_atomic stat; /* 0xe0 */
+};
+
+struct pic32_mii_regs {
+	struct pic32_reg_atomic mcfg; /* 0x280 */
+	struct pic32_reg_atomic mcmd; /* 0x290 */
+	struct pic32_reg_atomic madr; /* 0x2a0 */
+	struct pic32_reg_atomic mwtd; /* 0x2b0 */
+	struct pic32_reg_atomic mrdd; /* 0x2c0 */
+	struct pic32_reg_atomic mind; /* 0x2d0 */
+};
+
+struct pic32_emac_regs {
+	struct pic32_reg_atomic cfg1; /* 0x200*/
+	struct pic32_reg_atomic cfg2; /* 0x210*/
+	struct pic32_reg_atomic ipgt; /* 0x220*/
+	struct pic32_reg_atomic ipgr; /* 0x230*/
+	struct pic32_reg_atomic clrt; /* 0x240*/
+	struct pic32_reg_atomic maxf; /* 0x250*/
+	struct pic32_reg_atomic supp; /* 0x260*/
+	struct pic32_reg_atomic test; /* 0x270*/
+	struct pic32_mii_regs mii;    /* 0x280 - 0x2d0 */
+	struct pic32_reg_atomic res1; /* 0x2e0 */
+	struct pic32_reg_atomic res2; /* 0x2f0 */
+	struct pic32_reg_atomic sa0;  /* 0x300 */
+	struct pic32_reg_atomic sa1;  /* 0x310 */
+	struct pic32_reg_atomic sa2;  /* 0x320 */
+};
+
+/* ETHCON1 Reg field */
+#define ETHCON_BUFCDEC		BIT(0)
+#define ETHCON_RXEN		BIT(8)
+#define ETHCON_TXRTS		BIT(9)
+#define ETHCON_ON		BIT(15)
+
+/* ETHCON2 Reg field */
+#define ETHCON_RXBUFSZ		0x7f
+#define ETHCON_RXBUFSZ_SHFT	0x4
+
+/* ETHSTAT Reg field */
+#define ETHSTAT_BUSY		BIT(7)
+#define ETHSTAT_BUFCNT		0x00ff0000
+
+/* ETHRXFC Register fields */
+#define ETHRXFC_BCEN		BIT(0)
+#define ETHRXFC_MCEN		BIT(1)
+#define ETHRXFC_UCEN		BIT(3)
+#define ETHRXFC_RUNTEN		BIT(4)
+#define ETHRXFC_CRCOKEN		BIT(5)
+
+/* EMAC1CFG1 register offset */
+#define PIC32_EMAC1CFG1		0x0200
+
+/* EMAC1CFG1 register fields */
+#define EMAC_RXENABLE		BIT(0)
+#define EMAC_RXPAUSE		BIT(2)
+#define EMAC_TXPAUSE		BIT(3)
+#define EMAC_SOFTRESET		BIT(15)
+
+/* EMAC1CFG2 register fields */
+#define EMAC_FULLDUP		BIT(0)
+#define EMAC_LENGTHCK		BIT(1)
+#define EMAC_CRCENABLE		BIT(4)
+#define EMAC_PADENABLE		BIT(5)
+#define EMAC_AUTOPAD		BIT(7)
+#define EMAC_EXCESS		BIT(14)
+
+/* EMAC1IPGT register magic */
+#define FULLDUP_GAP_TIME	0x15
+#define HALFDUP_GAP_TIME	0x12
+
+/* EMAC1SUPP register fields */
+#define EMAC_RMII_SPD100	BIT(8)
+#define EMAC_RMII_RESET		BIT(11)
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RSTMGMT		BIT(15)
+#define MIIMCFG_CLKSEL_DIV40	0x0020	/* 100Mhz / 40 */
+
+/* MII Management Command Register */
+#define MIIMCMD_READ		BIT(0)
+#define MIIMCMD_SCAN		BIT(1)
+
+/* MII Management Address Register */
+#define MIIMADD_REGADDR		0x1f
+#define MIIMADD_REGADDR_SHIFT	0
+#define MIIMADD_PHYADDR_SHIFT	8
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY		BIT(0)
+#define MIIMIND_NOTVALID	BIT(2)
+#define MIIMIND_LINKFAIL	BIT(3)
+
+/* Packet Descriptor */
+/* Received Packet Status */
+#define _RSV1_PKT_CSUM		0xffff
+#define _RSV2_CRC_ERR		BIT(20)
+#define _RSV2_LEN_ERR		BIT(21)
+#define _RSV2_RX_OK		BIT(23)
+#define _RSV2_RX_COUNT		0xffff
+
+#define RSV_RX_CSUM(__rsv1)	((__rsv1) & _RSV1_PKT_CSUM)
+#define RSV_RX_COUNT(__rsv2)	((__rsv2) & _RSV2_RX_COUNT)
+#define RSV_RX_OK(__rsv2)	((__rsv2) & _RSV2_RX_OK)
+#define RSV_CRC_ERR(__rsv2)	((__rsv2) & _RSV2_CRC_ERR)
+
+/* Ethernet Hardware Descriptor Header bits */
+#define EDH_EOWN		BIT(7)
+#define EDH_NPV			BIT(8)
+#define EDH_STICKY		BIT(9)
+#define _EDH_BCOUNT		0x07ff0000
+#define EDH_EOP			BIT(30)
+#define EDH_SOP			BIT(31)
+#define EDH_BCOUNT_SHIFT	16
+#define EDH_BCOUNT(len)		((len) << EDH_BCOUNT_SHIFT)
+
+/* Ethernet Hardware Descriptors
+ * ref: PIC32 Family Reference Manual Table 35-7
+ * This structure represents the layout of the DMA
+ * memory shared between the CPU and the Ethernet
+ * controller.
+ */
+/* TX/RX DMA descriptor */
+struct eth_dma_desc {
+	u32 hdr;	/* header */
+	u32 data_buff;	/* data buffer address */
+	u32 stat1;	/* transmit/receive packet status */
+	u32 stat2;	/* transmit/receive packet status */
+	u32 next_ed;	/* next descriptor */
+};
+
+#define PIC32_MDIO_NAME "PIC32_EMAC"
+
+int pic32_mdio_init(const char *name, ulong ioaddr);
+
+#endif /* __MICROCHIP_PIC32_ETH_H_*/
diff --git a/drivers/net/pic32_mdio.c b/drivers/net/pic32_mdio.c
new file mode 100644
index 0000000..578fc96
--- /dev/null
+++ b/drivers/net/pic32_mdio.c
@@ -0,0 +1,121 @@
+/*
+ * pic32_mdio.c: PIC32 MDIO/MII driver, part of pic32_eth.c.
+ *
+ * Copyright 2015 Microchip Inc.
+ *	Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <phy.h>
+#include <miiphy.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+#include "pic32_eth.h"
+
+static int pic32_mdio_write(struct mii_dev *bus,
+			    int addr, int dev_addr,
+			    int reg, u16 value)
+{
+	u32 v;
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Wait for the previous operation to finish */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	/* Put phyaddr and regaddr into MIIMADD */
+	v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
+	writel(v, &mii_regs->madr.raw);
+
+	/* Initiate a write command */
+	writel(value, &mii_regs->mwtd.raw);
+
+	/* Wait 30 clock cycles for busy flag to be set */
+	udelay(12);
+
+	/* Wait for write to complete */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	return 0;
+}
+
+static int pic32_mdio_read(struct mii_dev *bus, int addr, int devaddr, int reg)
+{
+	u32 v;
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Wait for the previous operation to finish */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	/* Put phyaddr and regaddr into MIIMADD */
+	v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
+	writel(v, &mii_regs->madr.raw);
+
+	/* Initiate a read command */
+	writel(MIIMCMD_READ, &mii_regs->mcmd.raw);
+
+	/* Wait 30 clock cycles for busy flag to be set */
+	udelay(12);
+
+	/* Wait for read to complete */
+	wait_for_bit(__func__, &mii_regs->mind.raw,
+		     MIIMIND_NOTVALID | MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, false);
+
+	/* Clear the command register */
+	writel(0, &mii_regs->mcmd.raw);
+
+	/* Grab the value read from the PHY */
+	v = readl(&mii_regs->mrdd.raw);
+	return v;
+}
+
+static int pic32_mdio_reset(struct mii_dev *bus)
+{
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Reset MII (due to new addresses) */
+	writel(MIIMCFG_RSTMGMT, &mii_regs->mcfg.raw);
+
+	/* Wait for the operation to finish */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	/* Clear reset bit */
+	writel(0, &mii_regs->mcfg);
+
+	/* Wait for the operation to finish */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	/* Set the MII Management Clock (MDC) - no faster than 2.5 MHz */
+	writel(MIIMCFG_CLKSEL_DIV40, &mii_regs->mcfg.raw);
+
+	/* Wait for the operation to finish */
+	wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+	return 0;
+}
+
+int pic32_mdio_init(const char *name, ulong ioaddr)
+{
+	struct mii_dev *bus;
+
+	bus = mdio_alloc();
+	if (!bus) {
+		printf("Failed to allocate PIC32-MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	bus->read = pic32_mdio_read;
+	bus->write = pic32_mdio_write;
+	bus->reset = pic32_mdio_reset;
+	strncpy(bus->name, name, sizeof(bus->name));
+	bus->priv = (void *)ioaddr;
+
+	return mdio_register(bus);
+}

From 7d514a7407756d96996960c2ae539a4b464c65bc Mon Sep 17 00:00:00 2001
From: Purna Chandra Mandal <purna.mandal@microchip.com>
Date: Thu, 28 Jan 2016 15:30:22 +0530
Subject: [PATCH 20/20] board: Enable ethernet, tftpboot support to pic32mzdask
 board.

This adds ethernet, TFTP support for PIC32MZ[DA] Starter Kit. Also
custom environment variables/scripts are added to help boot from network.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
 arch/mips/dts/pic32mzda.dtsi   | 10 ++++++++++
 arch/mips/dts/pic32mzda_sk.dts | 10 ++++++++++
 configs/pic32mzdask_defconfig  |  9 ++++++---
 include/configs/pic32mzdask.h  | 22 +++++++++++++++++++++-
 4 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
index f1894ec..7d180d9 100644
--- a/arch/mips/dts/pic32mzda.dtsi
+++ b/arch/mips/dts/pic32mzda.dtsi
@@ -161,4 +161,14 @@
 		bus-width = <4>;
 		status = "disabled";
 	};
+
+	ethernet: ethernet@1f882000 {
+		compatible = "microchip,pic32mzda-eth";
+		reg = <0x1f882000 0x1000>;
+		interrupts = <153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock PB5CLK>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
index f886a0f..e5ce0bd 100644
--- a/arch/mips/dts/pic32mzda_sk.dts
+++ b/arch/mips/dts/pic32mzda_sk.dts
@@ -42,4 +42,14 @@
 
 &sdhci {
 	status = "okay";
+};
+
+&ethernet {
+	reset-gpios = <&gpioJ 15 0>;
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&ethernet_phy>;
+	ethernet_phy: lan8740_phy@0 {
+		reg = <0>;
+	};
 };
\ No newline at end of file
diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
index 55ba3f8..169a2ac 100644
--- a/configs/pic32mzdask_defconfig
+++ b/configs/pic32mzdask_defconfig
@@ -16,16 +16,19 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_CMD_RARP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_TIME=y
 CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_CLK=y
 CONFIG_DM_MMC=y
 CONFIG_PIC32_SDHCI=y
+CONFIG_DM_ETH=y
+CONFIG_PIC32_ETH=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_SYS_VSNPRINTF=y
 CONFIG_USE_TINY_PRINTF=y
-CONFIG_REGEX=y
 CONFIG_CMD_DHRYSTONE=y
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index b258038..3ea1194 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -73,6 +73,25 @@
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_CMDLINE_EDITING		1
 
+/*-----------------------------------------------------------------------
+ * Networking Configuration
+ */
+#define CONFIG_MII
+#define CONFIG_PHY_SMSC
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_ARP_TIMEOUT		500 /* millisec */
+
+#define CONFIG_CMD_MII
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
 /*
  * Handover flattened device tree (dtb file) to Linux kernel
  */
@@ -133,7 +152,8 @@
 		"fi; \0"
 
 #define BOOT_TARGET_DEVICES(func)	\
-	func(MMC, mmc, 0)
+	func(MMC, mmc, 0)		\
+	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>