Coding Style cleanup: remove trailing empty lines

Signed-off-by: Wolfgang Denk <wd@denx.de>

arch/arm/cpu/armv7/omap3/am35x_musb.c

@@ -59,4 +59,3 @@ void am35x_musb_clear_irq(void)
 			0, USBOTGSS_INT_CLR);
 	readl(&am35x_scm_general_regs->lvl_intr_clr);
 }
-

arch/arm/cpu/armv7/rmobile/Makefile

@@ -46,4 +46,3 @@ include $(SRCTREE)/rules.mk
 sinclude $(obj).depend
 
 #########################################################################
-

arch/microblaze/include/asm/gpio.h

@@ -12,4 +12,3 @@ extern int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no);
 extern void gpio_info(void);
 
 #endif
-

arch/microblaze/include/asm/microblaze_intc.h

@@ -36,4 +36,3 @@ int install_interrupt_handler(int irq, interrupt_handler_t *hdlr,
 				       void *arg);
 
 int interrupts_init(void);
-

arch/microblaze/include/asm/microblaze_timer.h

@@ -25,4 +25,3 @@ typedef volatile struct microblaze_timer_t {
 } microblaze_timer_t;
 
 int timer_init(void);
-

board/atmark-techno/armadillo-800eva/Makefile

@@ -43,4 +43,3 @@ include $(SRCTREE)/rules.mk
 sinclude $(obj).depend
 
 #########################################################################
-

board/cpc45/ide.c

@@ -126,4 +126,3 @@ void ide_led(uchar led, uchar status)
 
 	writeb(val, BCSR_BASE + 0x04);
 }
-

board/freescale/p1023rdb/ddr.c

@@ -86,4 +86,3 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 	}
 }
-

board/isee/igep0033/board.c

@@ -168,4 +168,3 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 #endif
-

board/isee/igep0033/mux.c

@@ -86,4 +86,3 @@ void enable_board_pin_mux(void)
 	/* Ethernet pinmux. */
 	configure_module_pin_mux(rmii1_pin_mux);
 }
-

board/logicpd/am3517evm/am3517evm.c

@@ -143,4 +143,3 @@ int board_eth_init(bd_t *bis)
 	return n;
 }
 #endif
-

board/palmtreo680/README

@@ -578,4 +578,3 @@ TODO
   - U-boot command that will write a new image to the bootloader partition in
     flash.
   - Linux FTD support.
-

doc/README.atmel_pmecc

@@ -27,4 +27,3 @@ Take AT91SAM9X5EK as an example, the board definition file likes:
 #define CONFIG_ATMEL_NAND_HW_PMECC	1
 #define CONFIG_PMECC_CAP		2
 #define CONFIG_PMECC_SECTOR_SIZE	512
-

drivers/mtd/mtdcore.c

@@ -388,4 +388,3 @@ int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		return -EROFS;
 	return mtd->_block_markbad(mtd, ofs);
 }
-

drivers/mtd/nand/nand_ids.c

@@ -180,4 +180,3 @@ const struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_EON, "Eon"},
 	{0x0, "Unknown"}
 };
-

drivers/usb/musb-new/Makefile

@@ -36,4 +36,3 @@ include $(SRCTREE)/rules.mk
 sinclude $(obj).depend
 
 #########################################################################
-

lib/libfdt/fdt_empty_tree.c

@@ -36,4 +36,3 @@ int fdt_create_empty_tree(void *buf, int bufsize)
 
 	return fdt_open_into(buf, buf, bufsize);
 }
-

lib/string.c

@@ -675,4 +675,3 @@ void *memchr_inv(const void *start, int c, size_t bytes)
 	return check_bytes8(start, value, bytes % 8);
 }
 #endif
-