From d5cf32977f0068c046687e3ff944c5e637b4bfa0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 18 Mar 2016 16:41:52 +0900 Subject: [PATCH] ARM: uniphier: support Debug UART For ARM32 architecture, CONFIG_DEBUG_LL is available for early low-level debugging (and actually UniPhier 32bit SoCs use it), but ARM64 architecture does not support it. Instead, CONFIG_DEBUG_UART is available as an architecture-independent debug facility. This commit supports it on all the UniPhier SoCs (including the new ARMv8 SoCs), which is very useful for new SoC bringups. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Makefile | 1 + arch/arm/mach-uniphier/debug-uart/Makefile | 17 +++++ .../arm/mach-uniphier/debug-uart/debug-uart-ld20.c | 35 +++++++++ arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c | 21 ++++++ .../arm/mach-uniphier/debug-uart/debug-uart-ld6b.c | 31 ++++++++ .../arm/mach-uniphier/debug-uart/debug-uart-pro4.c | 31 ++++++++ .../arm/mach-uniphier/debug-uart/debug-uart-pro5.c | 34 +++++++++ .../arm/mach-uniphier/debug-uart/debug-uart-pxs2.c | 32 ++++++++ .../arm/mach-uniphier/debug-uart/debug-uart-sld3.c | 31 ++++++++ .../arm/mach-uniphier/debug-uart/debug-uart-sld8.c | 21 ++++++ arch/arm/mach-uniphier/debug-uart/debug-uart.c | 85 ++++++++++++++++++++++ arch/arm/mach-uniphier/debug-uart/debug-uart.h | 20 +++++ arch/arm/mach-uniphier/init/init.c | 5 ++ drivers/serial/Kconfig | 9 +++ 14 files changed, 373 insertions(+) create mode 100644 arch/arm/mach-uniphier/debug-uart/Makefile create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-ld20.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-sld3.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart.c create mode 100644 arch/arm/mach-uniphier/debug-uart/debug-uart.h diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 1a8c649..35edca1 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -28,5 +28,6 @@ obj-y += boot-mode/ obj-y += dram/ obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o +obj-$(CONFIG_DEBUG_UART_UNIPHIER) += debug-uart/ obj-$(CONFIG_CPU_V7) += arm32/ diff --git a/arch/arm/mach-uniphier/debug-uart/Makefile b/arch/arm/mach-uniphier/debug-uart/Makefile new file mode 100644 index 0000000..0bad718 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/Makefile @@ -0,0 +1,17 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += debug-uart-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_LD4) += debug-uart-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += debug-uart-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += debug-uart-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += debug-uart-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += debug-uart-pxs2.o +obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += debug-uart-ld6b.o +obj-$(CONFIG_ARCH_UNIPHIER_LD11) += debug-uart-ld20.o +obj-$(CONFIG_ARCH_UNIPHIER_LD20) += debug-uart-ld20.o +endif + +obj-y += debug-uart.o diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld20.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld20.c new file mode 100644 index 0000000..2dc2bf8 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld20.c @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../sc64-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_LD20_UART_CLK 58820000 + +unsigned int uniphier_ld20_debug_uart_init(void) +{ + u32 tmp; + + sg_set_iectrl(54); /* TXD0 */ + sg_set_iectrl(58); /* TXD1 */ + sg_set_iectrl(90); /* TXD2 */ + sg_set_iectrl(94); /* TXD3 */ + sg_set_pinsel(54, 0, 8, 4); /* TXD0 -> TXD0 */ + sg_set_pinsel(58, 1, 8, 4); /* SPITXD1 -> TXD1 */ + sg_set_pinsel(90, 1, 8, 4); /* PC0WE -> TXD2 */ + sg_set_pinsel(94, 1, 8, 4); /* PCD00 -> TXD3 */ + + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_PERI; + writel(tmp, SC_CLKCTRL4); + + return DIV_ROUND_CLOSEST(UNIPHIER_LD20_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c new file mode 100644 index 0000000..d5f1234 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld4.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_LD4_UART_CLK 36864000 + +unsigned int uniphier_ld4_debug_uart_init(void) +{ + sg_set_iectrl(0); + sg_set_pinsel(88, 1, 8, 4); /* HSDOUT6 -> TXD0 */ + + return DIV_ROUND_CLOSEST(UNIPHIER_LD4_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c new file mode 100644 index 0000000..50879f5 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_LD6B_UART_CLK 88888888 + +unsigned int uniphier_ld6b_debug_uart_init(void) +{ + u32 tmp; + + sg_set_iectrl(0); + sg_set_pinsel(135, 3, 8, 4); /* PORT10 -> TXD0 */ + sg_set_pinsel(115, 0, 8, 4); /* TXD1 -> TXD1 */ + sg_set_pinsel(113, 2, 8, 4); /* SBO0 -> TXD2 */ + + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + return DIV_ROUND_CLOSEST(UNIPHIER_LD6B_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c new file mode 100644 index 0000000..91998ec --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_PRO4_UART_CLK 73728000 + +unsigned int uniphier_pro4_debug_uart_init(void) +{ + u32 tmp; + + sg_set_iectrl(0); + sg_set_pinsel(128, 0, 4, 8); /* TXD0 -> TXD0 */ + + writel(1, SG_LOADPINCTRL); + + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + return DIV_ROUND_CLOSEST(UNIPHIER_PRO4_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c new file mode 100644 index 0000000..5390396 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_PRO5_UART_CLK 73728000 + +unsigned int uniphier_pro5_debug_uart_init(void) +{ + u32 tmp; + + sg_set_iectrl(0); + sg_set_pinsel(47, 0, 4, 8); /* TXD0 -> TXD0 */ + sg_set_pinsel(49, 0, 4, 8); /* TXD1 -> TXD1 */ + sg_set_pinsel(51, 0, 4, 8); /* TXD2 -> TXD2 */ + sg_set_pinsel(53, 0, 4, 8); /* TXD3 -> TXD3 */ + + writel(1, SG_LOADPINCTRL); + + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + return DIV_ROUND_CLOSEST(UNIPHIER_PRO5_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c new file mode 100644 index 0000000..22a200a --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_PXS2_UART_CLK 88888888 + +unsigned int uniphier_pxs2_debug_uart_init(void) +{ + u32 tmp; + + sg_set_iectrl(0); + sg_set_pinsel(217, 8, 8, 4); /* TXD0 -> TXD0 */ + sg_set_pinsel(115, 8, 8, 4); /* TXD1 -> TXD1 */ + sg_set_pinsel(113, 8, 8, 4); /* TXD2 -> TXD2 */ + sg_set_pinsel(219, 8, 8, 4); /* TXD3 -> TXD3 */ + + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + return DIV_ROUND_CLOSEST(UNIPHIER_PXS2_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-sld3.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-sld3.c new file mode 100644 index 0000000..508318a --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-sld3.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include "../bcu/bcu-regs.h" +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_SLD3_UART_CLK 36864000 + +unsigned int uniphier_sld3_debug_uart_init(void) +{ + u32 tmp; + + sg_set_pinsel(64, 1, 4, 4); /* TXD0 -> TXD0 */ + + writel(0x24440000, BCSCR5); + + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + return DIV_ROUND_CLOSEST(UNIPHIER_SLD3_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c new file mode 100644 index 0000000..68d390c --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-sld8.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../sg-regs.h" +#include "debug-uart.h" + +#define UNIPHIER_SLD8_UART_CLK 80000000 + +unsigned int uniphier_sld8_debug_uart_init(void) +{ + sg_set_iectrl(0); + sg_set_pinsel(70, 3, 8, 4); /* HSDOUT6 -> TXD0 */ + + return DIV_ROUND_CLOSEST(UNIPHIER_SLD8_UART_CLK, 16 * CONFIG_BAUDRATE); +} diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/arch/arm/mach-uniphier/debug-uart/debug-uart.c new file mode 100644 index 0000000..d884785 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#include "../soc-info.h" +#include "debug-uart.h" + +#define UNIPHIER_UART_TX 0x00 +#define UNIPHIER_UART_LCR_MCR 0x10 +#define UNIPHIER_UART_LSR 0x14 +#define UNIPHIER_UART_LDR 0x24 + +static void _debug_uart_putc(int c) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE)) + ; + + writel(c, base + UNIPHIER_UART_TX); +} + +void _debug_uart_init(void) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + unsigned int divisor; + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_SLD3) + case SOC_UNIPHIER_SLD3: + divisor = uniphier_sld3_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_LD4) + case SOC_UNIPHIER_LD4: + divisor = uniphier_ld4_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PRO4) + case SOC_UNIPHIER_PRO4: + divisor = uniphier_pro4_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_SLD8) + case SOC_UNIPHIER_SLD8: + divisor = uniphier_sld8_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PRO5) + case SOC_UNIPHIER_PRO5: + divisor = uniphier_pro5_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PXS2) + case SOC_UNIPHIER_PXS2: + divisor = uniphier_pxs2_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_LD6B) + case SOC_UNIPHIER_LD6B: + divisor = uniphier_ld6b_debug_uart_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20) + case SOC_UNIPHIER_LD11: + case SOC_UNIPHIER_LD20: + divisor = uniphier_ld20_debug_uart_init(); + break; +#endif + default: + return; + } + + writel(UART_LCR_WLEN8 << 8, base + UNIPHIER_UART_LCR_MCR); + + writel(divisor, base + UNIPHIER_UART_LDR); +} +DEBUG_UART_FUNCS diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.h b/arch/arm/mach-uniphier/debug-uart/debug-uart.h new file mode 100644 index 0000000..8de9124 --- /dev/null +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MACH_DEBUG_UART_H +#define _MACH_DEBUG_UART_H + +unsigned int uniphier_sld3_debug_uart_init(void); +unsigned int uniphier_ld4_debug_uart_init(void); +unsigned int uniphier_pro4_debug_uart_init(void); +unsigned int uniphier_sld8_debug_uart_init(void); +unsigned int uniphier_pro5_debug_uart_init(void); +unsigned int uniphier_pxs2_debug_uart_init(void); +unsigned int uniphier_ld6b_debug_uart_init(void); +unsigned int uniphier_ld11_debug_uart_init(void); +unsigned int uniphier_ld20_debug_uart_init(void); + +#endif /* _MACH_DEBUG_UART_H */ diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c index d5d1018..7316d51 100644 --- a/arch/arm/mach-uniphier/init/init.c +++ b/arch/arm/mach-uniphier/init/init.c @@ -5,6 +5,7 @@ */ #include +#include #include #include "../init.h" @@ -14,6 +15,10 @@ void spl_board_init(void) { const struct uniphier_board_data *param; +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif + param = uniphier_get_board_param(); if (!param) hang(); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 92d4212..2a770a1 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -169,6 +169,15 @@ config DEBUG_UART_PIC32 will need to provide parameters to make this work. The driver will be available until the real driver model serial is running. +config DEBUG_UART_UNIPHIER + bool "UniPhier on-chip UART" + depends on ARCH_UNIPHIER + help + Select this to enable a debug UART using the UniPhier on-chip UART. + You will need to provide DEBUG_UART_BASE to make this work. The + driver will be available until the real driver-model serial is + running. + endchoice config DEBUG_UART_BASE