[PATCH] Update esd cpci5200 files

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

board/esd/cpci750/cpci750.c

@@ -29,6 +29,7 @@
  */
 
 #include <common.h>
+#include <command.h>
 #include <74xx_7xx.h>
 #include "../../Marvell/include/memory.h"
 #include "../../Marvell/include/pci.h"
@@ -899,3 +900,24 @@ void board_prebootm_init ()
 	flush_data_cache ();
 	dcache_disable ();
 }
+
+
+int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned int reset_sample_low;
+	unsigned int reset_sample_high;
+
+	GT_REG_READ(0x3c4, &reset_sample_low);
+	GT_REG_READ(0x3d4, &reset_sample_high);
+	printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high);
+
+        return(0);
+}
+
+
+U_BOOT_CMD(
+	show_cfg,	1,	1,	do_show_cfg,
+	"show_cfg- Show Marvell strapping register\n",
+	"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
+	);
+

board/esd/cpci750/sdram_init.c

@@ -1504,6 +1504,8 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 
 /*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
 	{
+	        int l, l1;
+
 		i = info->slot;
 		DP (printf
 		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
@@ -1511,20 +1513,39 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 		/* map the bank */
 		memory_map_bank (i, 0, GB / 4);
 #if 1				/* test only */
-		/* set SDRAM mode */ /* To_do check it */
+
+		tmp = GTREGREAD (SDRAM_MODE);
+		GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0);
+		GT_REG_WRITE (SDRAM_OPERATION, 0x4);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+
+		GT_REG_WRITE (SDRAM_MODE, tmp | 0x80);
 		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+		l1 = 0;
+		for (l=0;l<200;l++)
+		        l1 += GTREGREAD (SDRAM_OPERATION);
 
+		GT_REG_WRITE (SDRAM_MODE, tmp);
+		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
 
 		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
+		GT_REG_WRITE (SDRAM_OPERATION, 0x5);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+
 #endif /* test only */
 		/* unmap the bank */
 		memory_map_bank (i, 0, 0);