ARM: tegra: simplify GPU setup

Enable the GPU node in the system-wide ft_system_setup() hook instead of
the board-specific ft_board_hook(). This allows us to enable GPU per SoC
generation instead of per-board as we did initially.

Reported-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

arch/arm/mach-tegra/board2.c

@@ -403,3 +403,23 @@ ulong board_get_usable_ram_top(ulong total_size)
 {
 	return CONFIG_SYS_SDRAM_BASE + usable_ram_size_below_4g();
 }
+
+/*
+ * This function is called right before the kernel is booted. "blob" is the
+ * device tree that will be passed to the kernel.
+ */
+int ft_system_setup(void *blob, bd_t *bd)
+{
+	const char *gpu_path =
+#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210)
+		"/gpu@0,57000000";
+#else
+		NULL;
+#endif
+
+	/* Enable GPU node if GPU setup has been performed */
+	if (gpu_path != NULL)
+		return gpu_enable_node(blob, gpu_path);
+
+	return 0;
+}

board/nvidia/jetson-tk1/jetson-tk1.c

@@ -11,7 +11,6 @@
 
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/gpu.h>
 
 #include "pinmux-config-jetson-tk1.h"
 
@@ -80,10 +79,3 @@ int board_eth_init(bd_t *bis)
 	return pci_eth_init(bis);
 }
 #endif /* PCI */
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	gpu_enable_node(blob, "/gpu@0,57000000");
-
-	return 0;
-}

board/nvidia/p2571/p2571.c

@@ -11,7 +11,6 @@
 #include <asm/arch/pinmux.h>
 #include <asm/gpio.h>
 #include "max77620_init.h"
-#include <asm/arch-tegra/gpu.h>
 #include "pinmux-config-p2571.h"
 
 void pin_mux_mmc(void)
@@ -62,9 +61,3 @@ void start_cpu_fan(void)
 	gpio_request(GPIO_PE4, "FAN_VDD");
 	gpio_direction_output(GPIO_PE4, 1);
 }
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	gpu_enable_node(blob, "/gpu@0,57000000");
-	return 0;
-}

board/nvidia/venice2/venice2.c

@@ -8,7 +8,6 @@
 #include <common.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/gpu.h>
 #include "pinmux-config-venice2.h"
 
 /*
@@ -28,10 +27,3 @@ void pinmux_init(void)
 	pinmux_config_drvgrp_table(venice2_drvgrps,
 				   ARRAY_SIZE(venice2_drvgrps));
 }
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	gpu_enable_node(blob, "/gpu@0,57000000");
-
-	return 0;
-}

include/configs/jetson-tk1.h

@@ -78,6 +78,4 @@
 #define CONFIG_ARMV7_SECURE_BASE		0xfff00000
 #define CONFIG_ARMV7_SECURE_RESERVE_SIZE	0x00100000
 
-#define CONFIG_OF_BOARD_SETUP
-
 #endif /* __CONFIG_H */

include/configs/p2571.h

@@ -60,6 +60,4 @@
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
-#define CONFIG_OF_BOARD_SETUP
-
 #endif /* _P2571_H */

include/configs/tegra-common.h

@@ -143,4 +143,6 @@
 #define CONFIG_FAT_WRITE
 #endif
 
+#define CONFIG_OF_SYSTEM_SETUP
+
 #endif /* _TEGRA_COMMON_H_ */

include/configs/venice2.h

@@ -60,6 +60,4 @@
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
-#define CONFIG_OF_BOARD_SETUP
-
 #endif /* __CONFIG_H */