arm: ls1021aqds: Convert to driver model and enable serial support

Split duart configuration as device tree file. Move /chosen node
out of board commone device tree. Convert ls1021aqds nor and SD
configurations to driver model support (qspi already uses DM).
Enable ns16550 DM serial driver for nor configurations.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Alison Wang <alison.wang@nxp.com>
CC: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>

arch/arm/dts/Makefile

@@ -96,7 +96,7 @@ dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb
 dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
 dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
-dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
+dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
 	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
 dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
 	fsl-ls2080a-rdb.dtb

arch/arm/dts/ls1021a-qds-duart.dts

@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+};

arch/arm/dts/ls1021a-qds.dtsi

@@ -1,12 +1,11 @@
 /*
- * Freescale ls1021a QDS board device tree source
+ * Freescale ls1021a QDS board common device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-/dts-v1/;
 #include "ls1021a.dtsi"
 
 / {

configs/ls1021aqds_ddr4_nor_defconfig

@@ -1,7 +1,11 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y

configs/ls1021aqds_nor_defconfig

@@ -1,6 +1,10 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y

configs/ls1021aqds_qspi_defconfig

@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds"
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_SETEXPR is not set

configs/ls1021aqds_sdcard_defconfig

@@ -1,8 +1,11 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y

include/configs/ls1021aqds.h

@@ -375,7 +375,9 @@ unsigned long get_board_ddr_clk(void);
 #else
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
+#endif
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #endif