All these files are imported from linux kernel v4.13 Add device tree support for STM32H743 SoC and discovery board. This board offers : _ STM32H743XIH6 microcontroller with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package _ 5.7” 640x480 TFT color LCD with touch screen _ Ethernet compliant with IEEE-802.3-2002 _ USB OTG HS _ I2 C compatible serial interface _ ST-MEMS digital microphones _ 8-Gbyte (or more) SDIO3.0 interface microSD™ card _ 8Mx32bit SDRAM _ 1-Gbit Twin Quad-SPI NOR Flash _ Reset, wakeup, or key buttons _ Joystick with 4-direction control and selector _ Board connectors : 1 USB with Micro-AB Ethernet RJ45 Stereo headset jack including analog microphone input microSD™ card RCA connector JTAG/SWD and ETM trace _ Expansion connectors: Arduino Uno compatible Connectors 2 x PIO connectors (PMOD and PMOD+) _ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>master
parent
4e280b91a1
commit
d983a0f008
@ -0,0 +1,169 @@ |
||||
/* |
||||
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include <dt-bindings/pinctrl/stm32h7-pinfunc.h> |
||||
|
||||
/ { |
||||
soc { |
||||
pin-controller { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "st,stm32h743-pinctrl"; |
||||
ranges = <0 0x58020000 0x3000>; |
||||
pins-are-numbered; |
||||
|
||||
gpioa: gpio@58020000 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x0 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOA"; |
||||
}; |
||||
|
||||
gpiob: gpio@58020400 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x400 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOB"; |
||||
}; |
||||
|
||||
gpioc: gpio@58020800 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x800 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOC"; |
||||
}; |
||||
|
||||
gpiod: gpio@58020c00 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0xc00 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOD"; |
||||
}; |
||||
|
||||
gpioe: gpio@58021000 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x1000 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOE"; |
||||
}; |
||||
|
||||
gpiof: gpio@58021400 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x1400 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOF"; |
||||
}; |
||||
|
||||
gpiog: gpio@58021800 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x1800 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOG"; |
||||
}; |
||||
|
||||
gpioh: gpio@58021c00 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x1c00 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOH"; |
||||
}; |
||||
|
||||
gpioi: gpio@58022000 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x2000 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOI"; |
||||
}; |
||||
|
||||
gpioj: gpio@58022400 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x2400 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOJ"; |
||||
}; |
||||
|
||||
gpiok: gpio@58022800 { |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
reg = <0x2800 0x400>; |
||||
clocks = <&timer_clk>; |
||||
st,bank-name = "GPIOK"; |
||||
}; |
||||
|
||||
usart1_pins: usart1@0 { |
||||
pins1 { |
||||
pinmux = <STM32H7_PB14_FUNC_USART1_TX>; |
||||
bias-disable; |
||||
drive-push-pull; |
||||
slew-rate = <0>; |
||||
}; |
||||
pins2 { |
||||
pinmux = <STM32H7_PB15_FUNC_USART1_RX>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
usart2_pins: usart2@0 { |
||||
pins1 { |
||||
pinmux = <STM32H7_PD5_FUNC_USART2_TX>; |
||||
bias-disable; |
||||
drive-push-pull; |
||||
slew-rate = <0>; |
||||
}; |
||||
pins2 { |
||||
pinmux = <STM32H7_PD6_FUNC_USART2_RX>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
@ -0,0 +1,91 @@ |
||||
/* |
||||
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "skeleton.dtsi" |
||||
#include "armv7-m.dtsi" |
||||
|
||||
/ { |
||||
clocks { |
||||
clk_hse: clk-hse { |
||||
#clock-cells = <0>; |
||||
compatible = "fixed-clock"; |
||||
clock-frequency = <0>; |
||||
}; |
||||
|
||||
timer_clk: timer-clk { |
||||
#clock-cells = <0>; |
||||
compatible = "fixed-clock"; |
||||
clock-frequency = <125000000>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
usart1: serial@40011000 { |
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart"; |
||||
reg = <0x40011000 0x400>; |
||||
interrupts = <37>; |
||||
status = "disabled"; |
||||
clocks = <&timer_clk>; |
||||
|
||||
}; |
||||
|
||||
usart2: serial@40004400 { |
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart"; |
||||
reg = <0x40004400 0x400>; |
||||
interrupts = <38>; |
||||
status = "disabled"; |
||||
clocks = <&timer_clk>; |
||||
}; |
||||
|
||||
timer5: timer@40000c00 { |
||||
compatible = "st,stm32-timer"; |
||||
reg = <0x40000c00 0x400>; |
||||
interrupts = <50>; |
||||
clocks = <&timer_clk>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&systick { |
||||
clock-frequency = <250000000>; |
||||
status = "okay"; |
||||
}; |
@ -0,0 +1,73 @@ |
||||
/* |
||||
* Copyright 2017 - Patrice Chotard <patrice.chotard@st.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "stm32h743.dtsi" |
||||
#include "stm32h743-pinctrl.dtsi" |
||||
|
||||
/ { |
||||
model = "STMicroelectronics STM32H743i-Discovery board"; |
||||
compatible = "st,stm32h743i-disco", "st,stm32h743"; |
||||
|
||||
chosen { |
||||
bootargs = "root=/dev/ram"; |
||||
stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
memory { |
||||
reg = <0xd0000000 0x2000000>; |
||||
}; |
||||
|
||||
aliases { |
||||
serial0 = &usart2; |
||||
}; |
||||
}; |
||||
|
||||
&clk_hse { |
||||
clock-frequency = <125000000>; |
||||
}; |
||||
|
||||
&usart2 { |
||||
pinctrl-0 = <&usart2_pins>; |
||||
pinctrl-names = "default"; |
||||
status = "okay"; |
||||
}; |
File diff suppressed because it is too large
Load Diff
Loading…
Reference in new issue