Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

iomux-v3: Place pad control definitions into common file

Browse Source 
Instead of having the same PAD control definition in each MX6 variant pin file,
place it into a common location.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
master
Fabio Estevam 12 years ago committed by Stefano Babic
parent cd53034613
commit dc88403e6c
3 changed files with 26 additions and 55 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 27
      arch/arm/include/asm/arch-mx6/mx6dl_pins.h
  2. 27
      arch/arm/include/asm/arch-mx6/mx6q_pins.h
  3. 27
      arch/arm/include/asm/imx-common/iomux-v3.h

27
arch/arm/include/asm/arch-mx6/mx6dl_pins.h
Unescape View File

@ -22,33 +22,6 @@
#include <asm/imx-common/iomux-v3.h>
/* Use to set PAD control */
#define PAD_CTL_HYS (1 << 16)
#define PAD_CTL_PUS_100K_DOWN (0 << 14)
#define PAD_CTL_PUS_47K_UP (1 << 14)
#define PAD_CTL_PUS_100K_UP (2 << 14)
#define PAD_CTL_PUS_22K_UP (3 << 14)
#define PAD_CTL_PUE (1 << 13)
#define PAD_CTL_PKE (1 << 12)
#define PAD_CTL_ODE (1 << 11)
#define PAD_CTL_SPEED_LOW (1 << 6)
#define PAD_CTL_SPEED_MED (2 << 6)
#define PAD_CTL_SPEED_HIGH (3 << 6)
#define PAD_CTL_DSE_DISABLE (0 << 3)
#define PAD_CTL_DSE_240ohm (1 << 3)
#define PAD_CTL_DSE_120ohm (2 << 3)
#define PAD_CTL_DSE_80ohm (3 << 3)
#define PAD_CTL_DSE_60ohm (4 << 3)
#define PAD_CTL_DSE_48ohm (5 << 3)
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
#define IOMUX_CONFIG_SION 0x10
#define NO_MUX_I 0
#define NO_PAD_I 0
enum {
MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),

27
arch/arm/include/asm/arch-mx6/mx6q_pins.h
Unescape View File

@ -24,33 +24,6 @@
#include <asm/imx-common/iomux-v3.h>
/* Use to set PAD control */
#define PAD_CTL_HYS (1 << 16)
#define PAD_CTL_PUS_100K_DOWN (0 << 14)
#define PAD_CTL_PUS_47K_UP (1 << 14)
#define PAD_CTL_PUS_100K_UP (2 << 14)
#define PAD_CTL_PUS_22K_UP (3 << 14)
#define PAD_CTL_PUE (1 << 13)
#define PAD_CTL_PKE (1 << 12)
#define PAD_CTL_ODE (1 << 11)
#define PAD_CTL_SPEED_LOW (1 << 6)
#define PAD_CTL_SPEED_MED (2 << 6)
#define PAD_CTL_SPEED_HIGH (3 << 6)
#define PAD_CTL_DSE_DISABLE (0 << 3)
#define PAD_CTL_DSE_240ohm (1 << 3)
#define PAD_CTL_DSE_120ohm (2 << 3)
#define PAD_CTL_DSE_80ohm (3 << 3)
#define PAD_CTL_DSE_60ohm (4 << 3)
#define PAD_CTL_DSE_48ohm (5 << 3)
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
#define NO_MUX_I 0
#define NO_PAD_I 0
enum {
MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),

27
arch/arm/include/asm/imx-common/iomux-v3.h
Unescape View File

@ -95,7 +95,32 @@ typedef u64 iomux_v3_cfg_t;
#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
#define MUX_CONFIG_SION (0x1 << 4)
#define PAD_CTL_HYS (1 << 16)
#define PAD_CTL_PUS_100K_DOWN (0 << 14)
#define PAD_CTL_PUS_47K_UP (1 << 14)
#define PAD_CTL_PUS_100K_UP (2 << 14)
#define PAD_CTL_PUS_22K_UP (3 << 14)
#define PAD_CTL_PUE (1 << 13)
#define PAD_CTL_PKE (1 << 12)
#define PAD_CTL_ODE (1 << 11)
#define PAD_CTL_SPEED_LOW (1 << 6)
#define PAD_CTL_SPEED_MED (2 << 6)
#define PAD_CTL_SPEED_HIGH (3 << 6)
#define PAD_CTL_DSE_DISABLE (0 << 3)
#define PAD_CTL_DSE_240ohm (1 << 3)
#define PAD_CTL_DSE_120ohm (2 << 3)
#define PAD_CTL_DSE_80ohm (3 << 3)
#define PAD_CTL_DSE_60ohm (4 << 3)
#define PAD_CTL_DSE_48ohm (5 << 3)
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
#define IOMUX_CONFIG_SION 0x10
#define NO_MUX_I 0
#define NO_PAD_I 0
void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,

Write Preview
Loading…
Cancel
Save