Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.

Browse Source 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
master
Jon Loeliger 18 years ago committed by Wolfgang Denk
parent 6c18eb9804
commit dca3b3d6d6
14 changed files with 248 additions and 217 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 19
      include/configs/v37.h
  2. 48
      include/configs/v38b.h
  3. 18
      include/configs/versatile.h
  4. 38
      include/configs/virtlab2.h
  5. 47
      include/configs/voiceblue.h
  6. 49
      include/configs/walnut.h
  7. 19
      include/configs/wepep250.h
  8. 23
      include/configs/xaeniax.h
  9. 19
      include/configs/xm250.h
  10. 13
      include/configs/xsengine.h
  11. 45
      include/configs/xupv2p.h
  12. 56
      include/configs/yosemite.h
  13. 47
      include/configs/yucca.h
  14. 24
      include/configs/zylonite.h

19
include/configs/v37.h
Unescape View File

@ -83,9 +83,15 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_JFFS2 | \
CFG_CMD_DATE )
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_DATE
/*
* JFFS2 partitions
@ -105,15 +111,12 @@
#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)"
*/
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -194,7 +197,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

48
include/configs/v38b.h
Unescape View File

@ -46,11 +46,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
@ -89,28 +84,28 @@
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00001000
/*
* Supported commands
* Command line configuration.
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_PING | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
CFG_CMD_SDRAM | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
#include <config_cmd_default.h>
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_DATE
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Boot low with 16 MB Flash
@ -254,7 +249,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -270,6 +265,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Various low-level settings
*/

18
include/configs/versatile.h
Unescape View File

@ -96,14 +96,22 @@
#define CFG_SERIAL0 0x101F1000
#define CFG_SERIAL1 0x101F2000
#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV)
/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */
/*
* Command line configuration.
*/
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IMI
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_BDI
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_ENV
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0"

38
include/configs/virtlab2.h
Unescape View File

@ -96,27 +96,23 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#ifdef CONFIG_SPLASH_SCREEN
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_BMP | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
CFG_CMD_NFS | \
CFG_CMD_SNTP )
#else
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_IDE | \
CFG_CMD_NFS | \
CFG_CMD_SNTP )
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
#if defined(CONFIG_SPLASH_SCREEN)
#define CONFIG_CMD_BMP
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@ -131,7 +127,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -214,7 +210,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

47
include/configs/voiceblue.h
Unescape View File

@ -131,32 +131,29 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#ifdef VOICEBLUE_SMALL_FLASH
#define CONFIG_COMMANDS (CFG_CMD_BDI | \
CFG_CMD_LOADB | \
CFG_CMD_IMI | \
CFG_CMD_FLASH | \
CFG_CMD_MEMORY | \
CFG_CMD_NET | \
CFG_CMD_BOOTD | \
CFG_CMD_DHCP | \
CFG_CMD_PING | \
CFG_CMD_RUN)
#else
#define CONFIG_COMMANDS (CFG_CMD_BDI | \
CFG_CMD_LOADB | \
CFG_CMD_IMI | \
CFG_CMD_FLASH | \
CFG_CMD_MEMORY | \
CFG_CMD_NET | \
CFG_CMD_ENV | \
CFG_CMD_BOOTD | \
CFG_CMD_DHCP | \
CFG_CMD_PING | \
CFG_CMD_RUN | \
CFG_CMD_JFFS2)
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_BDI
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_IMI
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_NET
#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_RUN
#if !defined(VOICEBLUE_SMALL_FLASH)
#define CONFIG_CMD_ENV
#define CONFIG_CMD_JFFS2
#endif
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_LOOPW
@ -220,8 +217,6 @@
#endif /* VOICEBLUE_SMALL_FLASH */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options

49
include/configs/walnut.h
Unescape View File

@ -98,26 +98,29 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_WATCHDOG /* watchdog disabled */
@ -128,7 +131,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -283,7 +286,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@ -340,7 +343,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif

19
include/configs/wepep250.h
Unescape View File

@ -36,18 +36,15 @@
/*
* Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
* neccessary in include/cmd_confdefs.h file. (Un)comment for getting
* functionality or size of u-boot code.
* Command line configuration.
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
& ~CFG_CMD_NET \
& ~CFG_CMD_LOADS \
& ~CFG_CMD_CONSOLE \
& ~CFG_CMD_AUTOSCRIPT \
/* | CFG_CMD_JFFS2 */ \
)
#include <cmd_confdefs.h>
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_AUTOSCRIPT
/*
* Boot options. Setting delay to -1 stops autostart count down.

23
include/configs/xaeniax.h
Unescape View File

@ -64,15 +64,20 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_NFS | \
CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_CMD_DTT
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
@ -86,7 +91,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif

19
include/configs/xm250.h
Unescape View File

@ -81,14 +81,17 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ELF | \
CFG_CMD_EEPROM | \
CFG_CMD_DATE | \
CFG_CMD_I2C )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_BOOTDELAY 3

13
include/configs/xsengine.h
Unescape View File

@ -102,10 +102,17 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_BAUDRATE 115200
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_PING
#define CONFIG_CMD_JFFS2
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF

45
include/configs/xupv2p.h
Unescape View File

@ -118,27 +118,30 @@
#define CFG_ENV_IS_NOWHERE 1
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
CFG_CMD_MEMORY |\
CFG_CMD_IRQ |\
CFG_CMD_BDI |\
CFG_CMD_NET |\
CFG_CMD_IMI |\
CFG_CMD_ECHO |\
CFG_CMD_CACHE |\
CFG_CMD_RUN |\
CFG_CMD_AUTOSCRIPT |\
CFG_CMD_ASKENV |\
CFG_CMD_LOADS |\
CFG_CMD_LOADB |\
CFG_CMD_MISC |\
CFG_CMD_FAT |\
CFG_CMD_EXT2 |\
CFG_CMD_PING \
)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_BDI
#define CONFIG_CMD_NET
#define CONFIG_CMD_IMI
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_RUN
#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_MISC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_PING
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "

56
include/configs/yosemite.h
Unescape View File

@ -239,11 +239,7 @@
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2)
#define CONFIG_SUPPORT_VFAT
#else
#define CMD_USB 0 /* no USB on 440GR */
#endif /* CONFIG_440EP */
#ifdef DEBUG
@ -252,32 +248,40 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CMD_USB)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#ifdef CONFIG_440EP
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -344,7 +348,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@ -356,7 +360,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif

47
include/configs/yucca.h
Unescape View File

@ -136,7 +136,7 @@
/* Don't probe these addrs */
#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
/* #if defined(CONFIG_CMD_EEPROM) */
/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/* #endif */
@ -191,24 +191,27 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_EEPROM | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
@ -232,7 +235,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -313,7 +316,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@ -325,7 +328,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif

24
include/configs/zylonite.h
Unescape View File

@ -76,19 +76,23 @@
#define CONFIG_BAUDRATE 115200
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#ifdef TURN_ON_ETHERNET
# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
#define CONFIG_CMD_PING
#else
# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_ENV \
| CFG_CMD_NAND) \
& ~(CFG_CMD_NET \
| CFG_CMD_FLASH \
| CFG_CMD_IMLS))
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY -1
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@ -100,7 +104,7 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_TIMESTAMP
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif

Write Preview
Loading…
Cancel
Save