Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove calls to set_timer outside arch/

Browse Source 
There is no need to use set_timer(). Replace with appropriate use of
get_timer()

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
master
Graeme Russ 14 years ago committed by Wolfgang Denk
parent 525728b414
commit dcac25a05e
3 changed files with 18 additions and 12 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 10
      board/BuS/EB+MCF-EV123/flash.c
  2. 10
      board/cobra5272/flash.c
  3. 10
      board/idmr/flash.c

10
board/BuS/EB+MCF-EV123/flash.c
Unescape View File

@ -157,6 +157,7 @@ int amd_flash_erase_sector(flash_info_t * info, int sector)
{
int state;
ulong result;
ulong start;
volatile u16 *addr =
(volatile u16 *) (info->start[sector]);
@ -171,13 +172,13 @@ int amd_flash_erase_sector(flash_info_t * info, int sector)
/* wait until flash is ready */
state = 0;
set_timer (0);
start = get_timer(0);
do {
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
state = ERR_TIMOUT;
}
@ -267,6 +268,7 @@ volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
ulong result;
int cflag, iflag;
int state;
ulong start;
/*
* Check if Flash is (sufficiently) erased
@ -295,7 +297,7 @@ volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
*addr = data;
/* arm simple, non interrupt dependent timer */
set_timer (0);
start = get_timer(0);
/* wait until flash is ready */
state = 0;
@ -303,7 +305,7 @@ volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
state = ERR_TIMOUT;
}
if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))

10
board/cobra5272/flash.c
Unescape View File

@ -147,6 +147,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
int iflag, cflag, prot, sect;
int rc = ERR_OK;
int chip1;
ulong start;
/* first look for protection bits */
@ -190,7 +191,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf ("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
set_timer (0);
start = get_timer(0);
if (info->protect[sect] == 0) { /* not protected */
volatile u16 *addr =
@ -211,7 +212,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
@ -264,6 +265,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
int rc = ERR_OK;
int cflag, iflag;
int chip1;
ulong start;
/*
* Check if Flash is (sufficiently) erased
@ -291,7 +293,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
*addr = data;
/* arm simple, non interrupt dependent timer */
set_timer (0);
start = get_timer(0);
/* wait until flash is ready */
chip1 = 0;
@ -299,7 +301,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
chip1 = ERR | TMO;
break;
}

10
board/idmr/flash.c
Unescape View File

@ -130,6 +130,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
int iflag, prot, sect;
int rc = ERR_OK;
int chip1;
ulong start;
/* first look for protection bits */
@ -170,7 +171,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf ("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
set_timer (0);
start = get_timer(0);
if (info->protect[sect] == 0) { /* not protected */
volatile u16 *addr =
@ -191,7 +192,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
@ -248,6 +249,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
int rc = ERR_OK;
int iflag;
int chip1;
ulong start;
/*
* Check if Flash is (sufficiently) erased
@ -272,7 +274,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
*addr = data;
/* arm simple, non interrupt dependent timer */
set_timer (0);
start = get_timer(0);
/* wait until flash is ready */
chip1 = 0;
@ -280,7 +282,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
result = *addr;
/* check timeout */
if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
chip1 = ERR | TMO;
break;
}

Write Preview
Loading…
Cancel
Save