configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST

The config option has been removed by one of the syncs with the Linux
mainline MTD subsystem:
ff94bc40af (mtd, ubi, ubifs: resync with Linux-3.14)
It has been left inside the config files. Currently does not look to
serve any purpose, so remove it now from all the configs.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
Cc: Peter Barada <peter.barada@logicpd.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>

include/configs/PMC440.h

@@ -406,7 +406,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */

include/configs/cm_t35.h

@@ -147,7 +147,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */

include/configs/cm_t3517.h

@@ -154,7 +154,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */

include/configs/omap3_beagle.h

@@ -121,7 +121,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */

include/configs/omap3_cairo.h

@@ -70,7 +70,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */

include/configs/omap3_logic.h

@@ -105,7 +105,6 @@
  * Board NAND Info.
  */
 #define CONFIG_SYS_NAND_BASE            NAND_BASE
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */

include/configs/omap3_overo.h

@@ -88,7 +88,6 @@
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 /* Environment information */

include/configs/spear-common.h

@@ -97,7 +97,6 @@
 #define CONFIG_NAND_FSMC
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_QUIET_TEST
 
 /*
  * Command support defines

include/configs/tao3530.h

@@ -126,7 +126,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */

include/configs/xpedite517x.h

@@ -138,7 +138,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_ACTL_CLE 	(1 << 15)	/* C_LA15 */
 #define CONFIG_SYS_NAND_ACTL_NCE	0		/* NCE not controlled by ADDR */
 #define CONFIG_SYS_NAND_ACTL_DELAY	25
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_JFFS2_NAND
 
 /*

include/configs/xpedite537x.h

@@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 
 /*

include/configs/xpedite550x.h

@@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 
 /*