sata.h: Make all sata/ata drivers include <sata.h>

- block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt
  not ulong.
- We also move the extern of sata_dev_desc into <sata.h>
- Remove now duplicate declarations from driver-specific headers.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
master
Pavel Herrmann 12 years ago committed by Tom Rini
parent 4ac8f8e022
commit e46a4350b4
  1. 4
      drivers/block/ata_piix.c
  2. 2
      drivers/block/ata_piix.h
  3. 1
      drivers/block/dwc_ahsata.c
  4. 2
      drivers/block/dwc_ahsata.h
  5. 3
      drivers/block/fsl_sata.c
  6. 1
      drivers/block/pata_bfin.c
  7. 2
      drivers/block/pata_bfin.h
  8. 3
      drivers/block/sata_dwc.c
  9. 1
      drivers/block/sata_sil.c
  10. 2
      drivers/block/sata_sil.h
  11. 2
      drivers/block/sata_sil3114.c
  12. 7
      include/sata.h

@ -34,9 +34,7 @@
#include <part.h>
#include <ide.h>
#include <ata.h>
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
extern int sata_curr_device;
#include <sata.h>
#define DEBUG_SATA 0 /* For debug prints set DEBUG_SATA to 1 */

@ -56,8 +56,6 @@ int sata_devchk(struct sata_ioports *ioaddr, int dev);
void dev_select(struct sata_ioports *ioaddr, int dev);
u8 sata_busy_wait(struct sata_ioports *ioaddr, int bits, unsigned int max);
u8 sata_chk_status(struct sata_ioports *ioaddr);
ulong sata_read(int device, ulong blknr,lbaint_t blkcnt, void *buffer);
ulong sata_write(int device,ulong blknr, lbaint_t blkcnt, const void *buffer);
#endif
/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/

@ -24,6 +24,7 @@
#include <libata.h>
#include <ahci.h>
#include <fis.h>
#include <sata.h>
#include <common.h>
#include <malloc.h>

@ -330,6 +330,4 @@
#define READ_CMD 0
#define WRITE_CMD 1
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
#endif /* __FSL_SATA_H__ */

@ -26,10 +26,9 @@
#include <malloc.h>
#include <libata.h>
#include <fis.h>
#include <sata.h>
#include "fsl_sata.h"
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
#ifndef CONFIG_SYS_SATA1_FLAGS
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#endif

@ -17,6 +17,7 @@
#include <asm/portmux.h>
#include <asm/mach-common/bits/pata.h>
#include <ata.h>
#include <sata.h>
#include <libata.h>
#include "pata_bfin.h"

@ -41,8 +41,6 @@ struct ata_port {
unsigned char dev_mask;
};
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
#define DRV_NAME "pata-bfin"
#define DRV_VERSION "0.9"
#define __iomem

@ -35,6 +35,7 @@
#include <asm/io.h>
#include <malloc.h>
#include <ata.h>
#include <sata.h>
#include <linux/ctype.h>
#include "sata_dwc.h"
@ -268,8 +269,6 @@ static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
unsigned int flags, u16 *id);
static int check_sata_dev_state(void);
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
static const struct ata_port_info sata_dwc_port_info[] = {
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |

@ -25,6 +25,7 @@
#include <malloc.h>
#include <asm/io.h>
#include <fis.h>
#include <sata.h>
#include <libata.h>
#include "sata_sil.h"

@ -24,8 +24,6 @@
#define READ_CMD 0
#define WRITE_CMD 1
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
/*
* SATA device driver struct for each dev
*/

@ -28,6 +28,7 @@
#include <asm/byteorder.h>
#include <asm/io.h>
#include <ide.h>
#include <sata.h>
#include <libata.h>
#include "sata_sil3114.h"
@ -48,7 +49,6 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
static void msleep (int count);
static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];

@ -1,12 +1,15 @@
#ifndef __SATA_H__
#define __SATA_H__
#include <part.h>
int init_sata(int dev);
int scan_sata(int dev);
ulong sata_read(int dev, ulong blknr, ulong blkcnt, void *buffer);
ulong sata_write(int dev, ulong blknr, ulong blkcnt, const void *buffer);
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer);
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer);
int sata_initialize(void);
int __sata_initialize(void);
extern block_dev_desc_t sata_dev_desc[];
#endif

Loading…
Cancel
Save