Merge branch 'master' of git://www.denx.de/git/u-boot-usb

drivers/dfu/dfu_ram.c

@@ -54,19 +54,26 @@ static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset,
 
 int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s)
 {
-	char *st;
+	const char *argv[3];
+	const char **parg = argv;
+
+	for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
+		*parg = strsep(&s, " ");
+		if (*parg == NULL) {
+			error("Invalid number of arguments.\n");
+			return -ENODEV;
+		}
+	}
 
 	dfu->dev_type = DFU_DEV_RAM;
-	st = strsep(&s, " ");
-	if (strcmp(st, "ram")) {
-		error("unsupported device: %s\n", st);
+	if (strcmp(argv[0], "ram")) {
+		error("unsupported device: %s\n", argv[0]);
 		return -ENODEV;
 	}
 
 	dfu->layout = DFU_RAM_ADDR;
-	dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16);
-	s++;
-	dfu->data.ram.size = simple_strtoul(s, &s, 16);
+	dfu->data.ram.start = (void *)simple_strtoul(argv[1], NULL, 16);
+	dfu->data.ram.size = simple_strtoul(argv[2], NULL, 16);
 
 	dfu->write_medium = dfu_write_medium_ram;
 	dfu->get_medium_size = dfu_get_medium_size_ram;

drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c

@@ -229,13 +229,13 @@ static void complete_rx(struct dwc2_udc *dev, u8 ep_num)
 				ROUND(xfer_size, CONFIG_SYS_CACHELINE_SIZE));
 
 	req->req.actual += min(xfer_size, req->req.length - req->req.actual);
-	is_short = (xfer_size < ep->ep.maxpacket);
+	is_short = !!(xfer_size % ep->ep.maxpacket);
 
 	debug_cond(DEBUG_OUT_EP != 0,
 		   "%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
 		   "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
 		   __func__, ep_num, req->req.actual, req->req.length,
-		   is_short, ep_tsr, xfer_size);
+		   is_short, ep_tsr, req->req.length - req->req.actual);
 
 	if (is_short || req->req.actual == req->req.length) {
 		if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) {
@@ -292,7 +292,7 @@ static void complete_tx(struct dwc2_udc *dev, u8 ep_num)
 		"%s: TX DMA done : ep = %d, tx bytes = %d/%d, "
 		"is_short = %d, DIEPTSIZ = 0x%x, remained bytes = %d\n",
 		__func__, ep_num, req->req.actual, req->req.length,
-		is_short, ep_tsr, xfer_size);
+		is_short, ep_tsr, req->req.length - req->req.actual);
 
 	if (ep_num == 0) {
 		if (dev->ep0state == DATA_STATE_XMIT) {

drivers/usb/gadget/f_fastboot.c

@@ -39,6 +39,11 @@
 #define TX_ENDPOINT_MAXIMUM_PACKET_SIZE      (0x0040)
 
 #define EP_BUFFER_SIZE			4096
+/*
+ * EP_BUFFER_SIZE must always be an integral multiple of maxpacket size
+ * (64 or 512 or 1024), else we break on certain controllers like DWC3
+ * that expect bulk OUT requests to be divisible by maxpacket size.
+ */
 
 struct f_fastboot {
 	struct usb_function usb_function;
@@ -57,15 +62,13 @@ static struct f_fastboot *fastboot_func;
 static unsigned int fastboot_flash_session_id;
 static unsigned int download_size;
 static unsigned int download_bytes;
-static bool is_high_speed;
 
 static struct usb_endpoint_descriptor fs_ep_in = {
 	.bLength            = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType    = USB_DT_ENDPOINT,
 	.bEndpointAddress   = USB_DIR_IN,
 	.bmAttributes       = USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize     = TX_ENDPOINT_MAXIMUM_PACKET_SIZE,
-	.bInterval          = 0x00,
+	.wMaxPacketSize     = cpu_to_le16(64),
 };
 
 static struct usb_endpoint_descriptor fs_ep_out = {
@@ -73,8 +76,15 @@ static struct usb_endpoint_descriptor fs_ep_out = {
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_OUT,
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize		= RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1,
-	.bInterval		= 0x00,
+	.wMaxPacketSize		= cpu_to_le16(64),
+};
+
+static struct usb_endpoint_descriptor hs_ep_in = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_ep_out = {
@@ -82,8 +92,7 @@ static struct usb_endpoint_descriptor hs_ep_out = {
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_OUT,
 	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize		= RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
-	.bInterval		= 0x00,
+	.wMaxPacketSize		= cpu_to_le16(512),
 };
 
 static struct usb_interface_descriptor interface_desc = {
@@ -97,13 +106,28 @@ static struct usb_interface_descriptor interface_desc = {
 	.bInterfaceProtocol	= FASTBOOT_INTERFACE_PROTOCOL,
 };
 
-static struct usb_descriptor_header *fb_runtime_descs[] = {
+static struct usb_descriptor_header *fb_fs_function[] = {
 	(struct usb_descriptor_header *)&interface_desc,
 	(struct usb_descriptor_header *)&fs_ep_in,
+	(struct usb_descriptor_header *)&fs_ep_out,
+};
+
+static struct usb_descriptor_header *fb_hs_function[] = {
+	(struct usb_descriptor_header *)&interface_desc,
+	(struct usb_descriptor_header *)&hs_ep_in,
 	(struct usb_descriptor_header *)&hs_ep_out,
 	NULL,
 };
 
+static struct usb_endpoint_descriptor *
+fb_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+	    struct usb_endpoint_descriptor *hs)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return hs;
+	return fs;
+}
+
 /*
  * static strings, in UTF-8
  */
@@ -177,7 +201,15 @@ static int fastboot_bind(struct usb_configuration *c, struct usb_function *f)
 		return -ENODEV;
 	f_fb->out_ep->driver_data = c->cdev;
 
-	hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
+	f->descriptors = fb_fs_function;
+
+	if (gadget_is_dualspeed(gadget)) {
+		/* Assume endpoint addresses are the same for both speeds */
+		hs_ep_in.bEndpointAddress = fs_ep_in.bEndpointAddress;
+		hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
+		/* copy HS descriptors */
+		f->hs_descriptors = fb_hs_function;
+	}
 
 	s = getenv("serial#");
 	if (s)
@@ -236,18 +268,13 @@ static int fastboot_set_alt(struct usb_function *f,
 	struct usb_composite_dev *cdev = f->config->cdev;
 	struct usb_gadget *gadget = cdev->gadget;
 	struct f_fastboot *f_fb = func_to_fastboot(f);
+	const struct usb_endpoint_descriptor *d;
 
 	debug("%s: func: %s intf: %d alt: %d\n",
 	      __func__, f->name, interface, alt);
 
-	/* make sure we don't enable the ep twice */
-	if (gadget->speed == USB_SPEED_HIGH) {
-		ret = usb_ep_enable(f_fb->out_ep, &hs_ep_out);
-		is_high_speed = true;
-	} else {
-		ret = usb_ep_enable(f_fb->out_ep, &fs_ep_out);
-		is_high_speed = false;
-	}
+	d = fb_ep_desc(gadget, &fs_ep_out, &hs_ep_out);
+	ret = usb_ep_enable(f_fb->out_ep, d);
 	if (ret) {
 		puts("failed to enable out ep\n");
 		return ret;
@@ -261,7 +288,8 @@ static int fastboot_set_alt(struct usb_function *f,
 	}
 	f_fb->out_req->complete = rx_handler_command;
 
-	ret = usb_ep_enable(f_fb->in_ep, &fs_ep_in);
+	d = fb_ep_desc(gadget, &fs_ep_in, &hs_ep_in);
+	ret = usb_ep_enable(f_fb->in_ep, d);
 	if (ret) {
 		puts("failed to enable in ep\n");
 		goto err;
@@ -302,7 +330,6 @@ static int fastboot_add(struct usb_configuration *c)
 	}
 
 	f_fb->usb_function.name = "f_fastboot";
-	f_fb->usb_function.hs_descriptors = fb_runtime_descs;
 	f_fb->usb_function.bind = fastboot_bind;
 	f_fb->usb_function.unbind = fastboot_unbind;
 	f_fb->usb_function.set_alt = fastboot_set_alt;
@@ -427,20 +454,27 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req)
 	fastboot_tx_write_str(response);
 }
 
-static unsigned int rx_bytes_expected(unsigned int maxpacket)
+static unsigned int rx_bytes_expected(struct usb_ep *ep)
 {
 	int rx_remain = download_size - download_bytes;
-	int rem = 0;
-	if (rx_remain < 0)
+	unsigned int rem;
+	unsigned int maxpacket = ep->maxpacket;
+
+	if (rx_remain <= 0)
 		return 0;
-	if (rx_remain > EP_BUFFER_SIZE)
+	else if (rx_remain > EP_BUFFER_SIZE)
 		return EP_BUFFER_SIZE;
-	if (rx_remain < maxpacket) {
-		rx_remain = maxpacket;
-	} else if (rx_remain % maxpacket != 0) {
-		rem = rx_remain % maxpacket;
+
+	/*
+	 * Some controllers e.g. DWC3 don't like OUT transfers to be
+	 * not ending in maxpacket boundary. So just make them happy by
+	 * always requesting for integral multiple of maxpackets.
+	 * This shouldn't bother controllers that don't care about it.
+	 */
+	rem = rx_remain % maxpacket;
+	if (rem > 0)
 		rx_remain = rx_remain + (maxpacket - rem);
-	}
+
 	return rx_remain;
 }
 
@@ -452,7 +486,6 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
 	const unsigned char *buffer = req->buf;
 	unsigned int buffer_size = req->actual;
 	unsigned int pre_dot_num, now_dot_num;
-	unsigned int max;
 
 	if (req->status != 0) {
 		printf("Bad status: %d\n", req->status);
@@ -490,11 +523,7 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
 
 		printf("\ndownloading of %d bytes finished\n", download_bytes);
 	} else {
-		max = is_high_speed ? hs_ep_out.wMaxPacketSize :
-				fs_ep_out.wMaxPacketSize;
-		req->length = rx_bytes_expected(max);
-		if (req->length < ep->maxpacket)
-			req->length = ep->maxpacket;
+		req->length = rx_bytes_expected(ep);
 	}
 
 	req->actual = 0;
@@ -505,7 +534,6 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req)
 {
 	char *cmd = req->buf;
 	char response[FASTBOOT_RESPONSE_LEN];
-	unsigned int max;
 
 	strsep(&cmd, ":");
 	download_size = simple_strtoul(cmd, NULL, 16);
@@ -521,11 +549,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req)
 	} else {
 		sprintf(response, "DATA%08x", download_size);
 		req->complete = rx_handler_dl_image;
-		max = is_high_speed ? hs_ep_out.wMaxPacketSize :
-			fs_ep_out.wMaxPacketSize;
-		req->length = rx_bytes_expected(max);
-		if (req->length < ep->maxpacket)
-			req->length = ep->maxpacket;
+		req->length = rx_bytes_expected(ep);
 	}
 	fastboot_tx_write_str(response);
 }

test/py/tests/test_dfu.py

@@ -30,6 +30,13 @@ env__usb_dev_ports = (
     },
 )
 
+# Optional entries (required only when "alt_id_test_file" and
+# "alt_id_dummy_file" are specified).
+test_file_name = "/dfu_test.bin"
+dummy_file_name = "/dfu_dummy.bin"
+# Above files are used to generate proper "alt_info" entry
+"alt_info": "/%s ext4 0 2;/%s ext4 0 2" % (test_file_name, dummy_file_name),
+
 env__dfu_configs = (
     # eMMC, partition 1
     {
@@ -44,6 +51,24 @@ env__dfu_configs = (
         # configurations, but don't want to test every single transfer size
         # on each, to avoid bloating the overall time taken by testing.
         "test_sizes": (63, 64, 65),
+        # This value is optional.
+        # The name of the environment variable that the the dfu command reads
+        # alt info from. If unspecified, this defaults to dfu_alt_info, which is
+        # valid for most systems. Some systems use a different variable name.
+        # One example is the Odroid XU3,  which automatically generates
+        # $dfu_alt_info, each time the dfu command is run, by concatenating
+        # $dfu_alt_boot and $dfu_alt_system.
+        "alt_info_env_name": "dfu_alt_system",
+        # This value is optional.
+        # For boards which require the "test file" alt setting number other than
+        # default (0) it is possible to specify exact file name to be used as
+        # this parameter.
+        "alt_id_test_file": test_file_name,
+        # This value is optional.
+        # For boards which require the "dummy file" alt setting number other
+        # than default (1) it is possible to specify exact file name to be used
+        # as this parameter.
+        "alt_id_dummy_file": dummy_file_name,
     },
 )
 
@@ -120,7 +145,11 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
         u_boot_console.log.action(
             'Starting long-running U-Boot dfu shell command')
 
-        cmd = 'setenv dfu_alt_info "%s"' % env__dfu_config['alt_info']
+        dfu_alt_info_env = env__dfu_config.get('alt_info_env_name', \
+	                                               'dfu_alt_info')
+
+        cmd = 'setenv "%s" "%s"' % (dfu_alt_info_env,
+                                    env__dfu_config['alt_info'])
         u_boot_console.run_command(cmd)
 
         cmd = 'dfu 0 ' + env__dfu_config['cmd_params']
@@ -172,7 +201,7 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
             Nothing.
         """
 
-        cmd = ['dfu-util', '-a', str(alt_setting), up_dn_load_arg, fn]
+        cmd = ['dfu-util', '-a', alt_setting, up_dn_load_arg, fn]
         if 'host_usb_port_path' in env__usb_dev_port:
             cmd += ['-p', env__usb_dev_port['host_usb_port_path']]
         u_boot_utils.run_and_log(u_boot_console, cmd)
@@ -229,15 +258,15 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
 
         u_boot_console.log.action('Writing test data to DFU primary ' +
             'altsetting')
-        dfu_write(0, test_f.abs_fn)
+        dfu_write(alt_setting_test_file, test_f.abs_fn)
 
         u_boot_console.log.action('Writing dummy data to DFU secondary ' +
             'altsetting to clear DFU buffers')
-        dfu_write(1, dummy_f.abs_fn)
+        dfu_write(alt_setting_dummy_file, dummy_f.abs_fn)
 
         u_boot_console.log.action('Reading DFU primary altsetting for ' +
             'comparison')
-        dfu_read(0, readback_fn)
+        dfu_read(alt_setting_test_file, readback_fn)
 
         u_boot_console.log.action('Comparing written and read data')
         written_hash = test_f.content_hash
@@ -260,13 +289,16 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
     dummy_f = u_boot_utils.PersistentRandomFile(u_boot_console,
         'dfu_dummy.bin', 1024)
 
+    alt_setting_test_file = env__dfu_config.get('alt_id_test_file', '0')
+    alt_setting_dummy_file = env__dfu_config.get('alt_id_dummy_file', '1')
+
     ignore_cleanup_errors = True
     try:
         start_dfu()
 
         u_boot_console.log.action(
             'Overwriting DFU primary altsetting with dummy data')
-        dfu_write(0, dummy_f.abs_fn)
+        dfu_write(alt_setting_test_file, dummy_f.abs_fn)
 
         for size in sizes:
             with u_boot_console.log.section('Data size %d' % size):