rockchip: Add support for veyron-mickey (Chromebit)

This adds support for the Asus Chromebit, and RK3288-based device designed
to plug directly into an HDMI monitor. The device tree file comes from
Linux v4.8.

Signed-off-by: Simon Glass <sjg@chromium.org>
master
Simon Glass 8 years ago
parent 095e6c1f2d
commit e70408c069
  1. 1
      arch/arm/dts/Makefile
  2. 277
      arch/arm/dts/rk3288-veyron-mickey.dts
  3. 3
      arch/arm/mach-rockchip/rk3288-board-spl.c
  4. 9
      arch/arm/mach-rockchip/rk3288/Kconfig
  5. 16
      board/google/veyron/Kconfig
  6. 7
      board/google/veyron/MAINTAINERS
  7. 84
      configs/chromebit_mickey_defconfig

@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-sdk.dtb \
rk3288-firefly.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
rk3288-rock2-square.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \

@ -0,0 +1,277 @@
/*
* Google Veyron Mickey Rev 0 board device tree source
*
* Copyright 2015 Google, Inc
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
/ {
model = "Google Mickey";
compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
"google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
"google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
"google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
"google,veyron-mickey-rev0", "google,veyron-mickey",
"google,veyron", "rockchip,rk3288";
vcc_5v: vcc-5v {
vin-supply = <&vcc33_sys>;
};
vcc33_io: vcc33_io {
compatible = "regulator-fixed";
regulator-name = "vcc33_io";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc33_sys>;
};
};
&cpu_thermal {
/delete-node/ trips;
/delete-node/ cooling-maps;
trips {
cpu_alert_almost_warm: cpu_alert_almost_warm {
temperature = <63000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_warm: cpu_alert_warm {
temperature = <65000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_almost_hot: cpu_alert_almost_hot {
temperature = <80000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_hot: cpu_alert_hot {
temperature = <82000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_hotter: cpu_alert_hotter {
temperature = <84000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert_very_hot: cpu_alert_very_hot {
temperature = <85000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
/*
* After 1st level, throttle the CPU down to as low as 1.4 GHz
* and don't let the GPU go faster than 400 MHz. Note that we
* won't throttle the GPU lower than 400 MHz due to CPU
* heat--we'll let the GPU do the rest itself.
*/
cpu_warm_limit_cpu {
trip = <&cpu_alert_warm>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT 4>;
};
/*
* Add some discrete steps to help throttling system deal
* with the fact that there are two passive cooling devices:
* the CPU and the GPU.
*
* - 1.2 GHz - 1.0 GHz (almost hot)
* - 800 MHz (hot)
* - 800 MHz - 696 MHz (hotter)
* - 696 MHz - min (very hot)
*
* Note:
* - 800 MHz appears to be a "sweet spot" for me. I can run
* some pretty serious workload here and be happy.
* - After 696 MHz we stop lowering voltage, so throttling
* past there is less effective.
*/
cpu_almost_hot_limit_cpu {
trip = <&cpu_alert_almost_hot>;
cooling-device =
<&cpu0 5 6>;
};
cpu_hot_limit_cpu {
trip = <&cpu_alert_hot>;
cooling-device =
<&cpu0 7 7>;
};
cpu_hotter_limit_cpu {
trip = <&cpu_alert_hotter>;
cooling-device =
<&cpu0 7 8>;
};
cpu_very_hot_limit_cpu {
trip = <&cpu_alert_very_hot>;
cooling-device =
<&cpu0 8 THERMAL_NO_LIMIT>;
};
};
};
&dmc {
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
0x8 0x1f4>;
rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
0x0 0xc3 0x6 0x2>;
rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
};
&emmc {
/delete-property/mmc-hs200-1_8v;
};
&i2c2 {
status = "disabled";
};
&i2c4 {
status = "disabled";
};
&i2s {
status = "okay";
clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
};
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
/delete-property/ vcc12-supply;
vcc11-supply = <&vcc33_sys>;
regulators {
/* vcc33_io is sourced directly from vcc33_sys */
/delete-node/ LDO_REG1;
/delete-node/ LDO_REG7;
/* This is not a pwren anymore, but the real power supply */
vdd10_lcd: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
regulator-suspend-mem-disabled;
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
regulator-suspend-mem-disabled;
};
};
};
&pinctrl {
hdmi {
power_hdmi_on: power-hdmi-on {
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&sdmmc {
status = "disabled";
};
&sdio0 {
status = "disabled";
};
&sdmmc {
status = "disabled";
};
&spi0 {
status = "disabled";
};
&usb_host0_ehci {
status = "disabled";
};
&usb_host1 {
status = "disabled";
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};

@ -64,7 +64,8 @@ u32 spl_boot_device(void)
}
fallback:
#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY)
#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
defined(CONFIG_TARGET_CHROMEBIT_MICKEY)
return BOOT_DEVICE_SPI;
#endif
return BOOT_DEVICE_MMC1;

@ -49,6 +49,15 @@ config TARGET_CHROMEBOOK_JERRY
WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
the keyboard and battery functions.
config TARGET_CHROMEBIT_MICKEY
bool "Google/Rockchip Veyron-Mickey Chromebit"
help
Mickey is a small RK3288-based device with one USB 3.0 port, HDMI
and WiFi. It has a separate power port and is designed to connect
to the HDMI input of a monitor or TV. It has no internal battery.
Typically a USB hub or wireless keyboard/touchpad is used to get
keyboard and mouse access.
config TARGET_ROCK2
bool "Radxa Rock 2"
help

@ -13,3 +13,19 @@ config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif
if TARGET_CHROMEBIT_MICKEY
config SYS_BOARD
default "veyron"
config SYS_VENDOR
default "google"
config SYS_CONFIG_NAME
default "veyron"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif

@ -4,3 +4,10 @@ S: Maintained
F: board/google/veyron/
F: include/configs/veyron.h
F: configs/chromebook_jerry_defconfig
CHROMEBIT MICKEY BOARD
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: board/google/veyron/
F: include/configs/veyron.h
F: configs/chromebit_mickey_defconfig

@ -0,0 +1,84 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBIT_MICKEY=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DM_KEYBOARD=y
CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-mickey"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
# CONFIG_SPL_SIMPLE_BUS is not set
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_I2C_MUX=y
CONFIG_CROS_EC_KEYB=y
CONFIG_CMD_CROS_EC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_SPI=y
CONFIG_PWRSEQ=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_RK808=y
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK808=y
CONFIG_DM_PWM=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_ROCKCHIP_SERIAL=y
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_SPL_OF_LIBFDT is not set
Loading…
Cancel
Save