Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7

Browse Source 
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
master
Masahiro Yamada 11 years ago committed by Tom Rini
parent 9ed3246e19
commit e7a565638a
27 changed files with 2 additions and 2495 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 8
      arch/powerpc/cpu/mpc83xx/Kconfig
  2. 12
      board/matrix_vision/mergerbox/Kconfig
  3. 6
      board/matrix_vision/mergerbox/MAINTAINERS
  4. 8
      board/matrix_vision/mergerbox/Makefile
  5. 59
      board/matrix_vision/mergerbox/README
  6. 158
      board/matrix_vision/mergerbox/fpga.c
  7. 13
      board/matrix_vision/mergerbox/fpga.h
  8. 235
      board/matrix_vision/mergerbox/mergerbox.c
  9. 61
      board/matrix_vision/mergerbox/mergerbox.h
  10. 128
      board/matrix_vision/mergerbox/pci.c
  11. 120
      board/matrix_vision/mergerbox/sm107.c
  12. 1
      board/matrix_vision/mvblm7/.gitignore
  13. 12
      board/matrix_vision/mvblm7/Kconfig
  14. 6
      board/matrix_vision/mvblm7/MAINTAINERS
  15. 14
      board/matrix_vision/mvblm7/Makefile
  16. 84
      board/matrix_vision/mvblm7/README.mvblm7
  17. 43
      board/matrix_vision/mvblm7/bootscript
  18. 169
      board/matrix_vision/mvblm7/fpga.c
  19. 17
      board/matrix_vision/mvblm7/fpga.h
  20. 136
      board/matrix_vision/mvblm7/mvblm7.c
  21. 20
      board/matrix_vision/mvblm7/mvblm7.h
  22. 89
      board/matrix_vision/mvblm7/pci.c
  23. 3
      configs/MERGERBOX_defconfig
  24. 3
      configs/MVBLM7_defconfig
  25. 2
      doc/README.scrapyard
  26. 599
      include/configs/MERGERBOX.h
  27. 491
      include/configs/MVBLM7.h

8
arch/powerpc/cpu/mpc83xx/Kconfig
Unescape View File

@ -64,12 +64,6 @@ config TARGET_SUVD3
config TARGET_TUXX1
bool "Support tuxx1"
config TARGET_MERGERBOX
bool "Support MERGERBOX"
config TARGET_MVBLM7
bool "Support MVBLM7"
config TARGET_TQM834X
bool "Support TQM834x"
@ -89,8 +83,6 @@ source "board/freescale/mpc837xemds/Kconfig"
source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
source "board/keymile/km83xx/Kconfig"
source "board/matrix_vision/mergerbox/Kconfig"
source "board/matrix_vision/mvblm7/Kconfig"
source "board/mpc8308_p1m/Kconfig"
source "board/sbc8349/Kconfig"
source "board/tqc/tqm834x/Kconfig"

12
board/matrix_vision/mergerbox/Kconfig
Unescape View File

@ -1,12 +0,0 @@
if TARGET_MERGERBOX
config SYS_BOARD
default "mergerbox"
config SYS_VENDOR
default "matrix_vision"
config SYS_CONFIG_NAME
default "MERGERBOX"
endif

6
board/matrix_vision/mergerbox/MAINTAINERS
Unescape View File

@ -1,6 +0,0 @@
MERGERBOX BOARD
#M: Andre Schwarz <andre.schwarz@matrix-vision.de>
S: Orphan (since 2014-03)
F: board/matrix_vision/mergerbox/
F: include/configs/MERGERBOX.h
F: configs/MERGERBOX_defconfig

8
board/matrix_vision/mergerbox/Makefile
Unescape View File

@ -1,8 +0,0 @@
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += mergerbox.o pci.o fpga.o sm107.o

59
board/matrix_vision/mergerbox/README
Unescape View File

@ -1,59 +0,0 @@
Matrix Vision MergerBox
-----------------------
1. Board Description
The MergerBox is a 120x160mm single board computing platform
for 3D Full-HD digital video processing.
Power Supply is 10-32VDC.
2 System Components
2.1 CPU
Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
256 MByte DDR-II memory @ 333MHz data rate.
64 MByte Nor Flash on local bus.
1 GByte Nand Flash on FCM.
1 Vitesse VSC8601 RGMII ethernet Phys.
1 USB host controller over ULPI I/F with 4-Port hub.
2 serial ports. Console running on ttyS0 @ 115200 8N1.
1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
2 PCIe x1 busses on local mPCIe and cutom expansion connector.
2 SATA host ports.
System configuration (HRCW) is taken from I2C EEPROM.
2.2 Graphics
SM107 emebedded video controller driving a 5" 800x480 TFT panel.
Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
2.3 FPGA
Altera Cyclone-IV EP4C115 with several PCI DMA engines.
Connects to 7x Gennum 3G-SDI transceivers as video interconnect
as well as a HDMI v1.4 compliant output for 3D monitoring.
Utilizes two more DDR-II controllers providing 256MB memory.
2.4 I2C
Bus1:
AD7418 @ 0x50 for voltage/temp. monitoring.
SX8650 @ 0x90 touch controller for HMI.
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
Bus2:
mPCIe SMBus
SiI9022A @ 0x72/0xC0 HDMI transmitter.
TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
LMH1983 @ 0xCA video PLL.
DS1338C @ 0xD0 real-time clock with embedded crystal.
9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
3 Flash layout.
reset vector is 0x00000100, i.e. low boot.
00000000 u-boot binary.
00100000 FPGA raw bit file.
00300000 FIT image holding kernel, dtb and rescue squashfs.
03d00000 u-boot environment.
03e00000 splash image
mtd partitions are propagated to linux kernel via device tree blob.

158
board/matrix_vision/mergerbox/fpga.c
Unescape View File

@ -1,158 +0,0 @@
/*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
* Keith Outwater, keith_outwater@mvis.com.
*
* (C) Copyright 2011
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ACEX1K.h>
#include <command.h>
#include "mergerbox.h"
#include "fpga.h"
Altera_CYC2_Passive_Serial_fns altera_fns = {
fpga_null_fn,
fpga_config_fn,
fpga_status_fn,
fpga_done_fn,
fpga_wr_fn,
fpga_null_fn,
fpga_null_fn,
};
Altera_desc cyclone2 = {
Altera_CYC2,
passive_serial,
Altera_EP2C20_SIZE,
(void *) &altera_fns,
NULL,
0
};
DECLARE_GLOBAL_DATA_PTR;
int mergerbox_init_fpga(void)
{
debug("Initialize FPGA interface\n");
fpga_init();
fpga_add(fpga_altera, &cyclone2);
return 1;
}
int fpga_null_fn(int cookie)
{
return 0;
}
int fpga_config_fn(int assert, int flush, int cookie)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
u32 dvo = gpio->dat;
dvo &= ~FPGA_CONFIG;
gpio->dat = dvo;
udelay(5);
dvo |= FPGA_CONFIG;
gpio->dat = dvo;
return assert;
}
int fpga_done_fn(int cookie)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
int result = 0;
udelay(10);
debug("CONF_DONE check ... ");
if (gpio->dat & FPGA_CONF_DONE) {
debug("high\n");
result = 1;
} else
debug("low\n");
return result;
}
int fpga_status_fn(int cookie)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
int result = 0;
debug("STATUS check ... ");
if (gpio->dat & FPGA_STATUS) {
debug("high\n");
result = 1;
} else
debug("low\n");
return result;
}
int fpga_clk_fn(int assert_clk, int flush, int cookie)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
u32 dvo = gpio->dat;
debug("CLOCK %s\n", assert_clk ? "high" : "low");
if (assert_clk)
dvo |= FPGA_CCLK;
else
dvo &= ~FPGA_CCLK;
if (flush)
gpio->dat = dvo;
return assert_clk;
}
static inline int _write_fpga(u8 val, int dump)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
int i;
u32 dvo = gpio->dat;
if (dump)
debug(" %02x -> ", val);
for (i = 0; i < 8; i++) {
dvo &= ~FPGA_CCLK;
gpio->dat = dvo;
dvo &= ~FPGA_DIN;
if (dump)
debug("%d ", val&1);
if (val & 1)
dvo |= FPGA_DIN;
gpio->dat = dvo;
dvo |= FPGA_CCLK;
gpio->dat = dvo;
val >>= 1;
}
if (dump)
debug("\n");
return 0;
}
int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
{
unsigned char *data = (unsigned char *) buf;
int i;
debug("fpga_wr: buf %p / size %d\n", buf, len);
for (i = 0; i < len; i++)
_write_fpga(data[i], 0);
debug("\n");
return FPGA_SUCCESS;
}

13
board/matrix_vision/mergerbox/fpga.h
Unescape View File

@ -1,13 +0,0 @@
/*
* SPDX-License-Identifier: GPL-2.0+
*/
extern int mergerbox_init_fpga(void);
extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
extern int fpga_status_fn(int cookie);
extern int fpga_config_fn(int assert, int flush, int cookie);
extern int fpga_done_fn(int cookie);
extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
extern int fpga_null_fn(int cookie);

235
board/matrix_vision/mergerbox/mergerbox.c
Unescape View File

@ -1,235 +0,0 @@
/*
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Copyright (C) 2011 Matrix Vision GmbH
* Andre Schwarz <andre.schwarz@matrix-vision.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <hwconfig.h>
#include <i2c.h>
#include <spi.h>
#include <asm/io.h>
#include <asm/fsl_mpc83xx_serdes.h>
#include <fdt_support.h>
#include <spd_sdram.h>
#include "mergerbox.h"
#include "fpga.h"
#include "../common/mv_common.h"
static void setup_serdes(void)
{
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
}
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram(void)
{
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing DRAM from 0x%08x to 0x%08x\n",
CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
printf("DRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf("DRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("DRAM test passed.\n");
return 0;
}
#endif
phys_size_t initdram(int board_type)
{
u32 msize;
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
/* Enable PCI_CLK[0:1] */
clk->occr |= 0xc0000000;
udelay(2000);
#if defined(CONFIG_SPD_EEPROM)
msize = spd_sdram();
#else
immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize_log2;
msize = CONFIG_SYS_DDR_SIZE;
msize_log2 = __ilog2(msize);
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
udelay(50000);
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
udelay(1000);
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
udelay(1000);
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
__asm__ __volatile__("sync");
udelay(1000);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
udelay(2000);
#endif
setup_serdes();
return msize << 20;
}
int checkboard(void)
{
puts("Board: Matrix Vision MergerBox\n");
return 0;
}
int misc_init_r(void)
{
u16 dim;
int result;
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (gpio83xx_t *)&immr->gpio[1];
unsigned char mac[6], mac_verify[6];
char *s = getenv("reset_env");
for (dim = 10; dim < 180; dim += 5) {
mergerbox_tft_dim(dim);
udelay(100000);
}
if (s)
mv_reset_environment();
i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac, sizeof(mac));
/* check if Matrix Vision prefix present and export to env */
if (mac[0] == 0x00 && mac[1] == 0x0c && mac[2] == 0x8d) {
printf("valid MAC found in eeprom: %pM\n", mac);
eth_setenv_enetaddr("ethaddr", mac);
} else {
printf("no valid MAC found in eeprom.\n");
/* no: check the env */
if (!eth_getenv_enetaddr("ethaddr", mac)) {
printf("no valid MAC found in env either.\n");
/* TODO: ask for valid MAC */
} else {
printf("valid MAC found in env: %pM\n", mac);
printf("updating MAC in eeprom.\n");
do {
result = test_and_clear_bit(20, &gpio->dat);
if (result)
printf("unprotect EEPROM failed !\n");
udelay(20000);
} while(result);
i2c_write(SPD_EEPROM_ADDRESS, 0x80, 2, mac, 6);
udelay(20000);
do {
result = test_and_set_bit(20, &gpio->dat);
if (result)
printf("protect EEPROM failed !\n");
udelay(20000);
} while(result);
printf("verify MAC %pM ... ", mac);
i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac_verify, 6);
if (!strncmp((char *)mac, (char *)mac_verify, 6))
printf("ok.\n");
else
/* TODO: retry or do something useful */
printf("FAILED (got %pM) !\n", mac_verify);
}
}
return 0;
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat &= ~TFT_SPI_CPLD_CS;
}
void spi_cs_deactivate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat |= TFT_SPI_CPLD_CS;
}
/* control backlight pwm (display brightness).
* allow values 0-250 with 0 = turn off and 250 = max brightness
*/
void mergerbox_tft_dim(u16 value)
{
struct spi_slave *slave;
u16 din;
u16 dout = 0;
if (value > 0 && value < 250)
dout = 0x4000 | value;
slave = spi_setup_slave(0, 0, 1000000, SPI_MODE_0 | SPI_CS_HIGH);
spi_claim_bus(slave);
spi_xfer(slave, 16, &dout, &din, SPI_XFER_BEGIN | SPI_XFER_END);
spi_release_bus(slave);
spi_free_slave(slave);
}
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
fdt_fixup_dr_usb(blob, bd);
ft_pci_setup(blob, bd);
}

61
board/matrix_vision/mergerbox/mergerbox.h
Unescape View File

@ -1,61 +0,0 @@
/*
* Copyright (C) 2011 Matrix Vision GmbH
* Andre Schwarz <andre.schwarz@matrix-vision.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MERGERBOX_H__
#define __MERGERBOX_H__
#define MV_GPIO
/*
* GPIO Bank 1
*/
#define TFT_SPI_EN (0x80000000>>0)
#define FPGA_CONFIG (0x80000000>>1)
#define FPGA_STATUS (0x80000000>>2)
#define FPGA_CONF_DONE (0x80000000>>3)
#define FPGA_DIN (0x80000000>>4)
#define FPGA_CCLK (0x80000000>>5)
#define MAN_RST (0x80000000>>6)
#define FPGA_SYS_RST (0x80000000>>7)
#define WD_WDI (0x80000000>>8)
#define TFT_RST (0x80000000>>9)
#define HISCON_GPIO1 (0x80000000>>10)
#define HISCON_GPIO2 (0x80000000>>11)
#define B2B_GPIO2 (0x80000000>>12)
#define CCU_GPIN (0x80000000>>13)
#define CCU_GPOUT (0x80000000>>14)
#define TFT_GPIO0 (0x80000000>>15)
#define TFT_GPIO1 (0x80000000>>16)
#define TFT_GPIO2 (0x80000000>>17)
#define TFT_GPIO3 (0x80000000>>18)
#define B2B_GPIO0 (0x80000000>>19)
#define B2B_GPIO1 (0x80000000>>20)
#define TFT_SPI_CPLD_CS (0x80000000>>21)
#define TFT_SPI_CS (0x80000000>>22)
#define CCU_PWR_EN (0x80000000>>23)
#define B2B_GPIO3 (0x80000000>>24)
#define CCU_PWR_STAT (0x80000000>>25)
#define MV_GPIO1_DAT (FPGA_CONFIG|CCU_PWR_EN|TFT_SPI_CPLD_CS)
#define MV_GPIO1_OUT (TFT_SPI_EN|FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|CCU_PWR_EN| \
TFT_SPI_CPLD_CS)
#define MV_GPIO1_ODE (FPGA_CONFIG|MAN_RST)
/*
* GPIO Bank 2
*/
#define SPI_FLASH_WP (0x80000000>>10)
#define SYS_EEPROM_WP (0x80000000>>11)
#define SPI_FLASH_CS (0x80000000>>22)
#define MV_GPIO2_DAT (SYS_EEPROM_WP|SPI_FLASH_CS)
#define MV_GPIO2_OUT (SPI_FLASH_WP|SYS_EEPROM_WP|SPI_FLASH_CS)
#define MV_GPIO2_ODE 0
void mergerbox_tft_dim(u16 value);
#endif

128
board/matrix_vision/mergerbox/pci.c
Unescape View File

@ -1,128 +0,0 @@
/*
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*
* Copyright (C) 2011 Matrix Vision GmbH
* Andre Schwarz <andre.schwarz@matrix-vision.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc83xx.h>
#include <pci.h>
#include <asm/io.h>
#include <asm/fsl_mpc83xx_serdes.h>
#include "mergerbox.h"
#include "fpga.h"
#include "../common/mv_common.h"
static struct pci_region pci_regions[] = {
{
.bus_start = CONFIG_SYS_PCI_MEM_BASE,
.phys_start = CONFIG_SYS_PCI_MEM_PHYS,
.size = CONFIG_SYS_PCI_MEM_SIZE,
.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
.bus_start = CONFIG_SYS_PCI_MMIO_BASE,
.phys_start = CONFIG_SYS_PCI_MMIO_PHYS,
.size = CONFIG_SYS_PCI_MMIO_SIZE,
.flags = PCI_REGION_MEM
},
{
.bus_start = CONFIG_SYS_PCI_IO_BASE,
.phys_start = CONFIG_SYS_PCI_IO_PHYS,
.size = CONFIG_SYS_PCI_IO_SIZE,
.flags = PCI_REGION_IO
}
};
static struct pci_region pcie_regions_0[] = {
{
.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
.size = CONFIG_SYS_PCIE1_MEM_SIZE,
.flags = PCI_REGION_MEM,
},
{
.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
.size = CONFIG_SYS_PCIE1_IO_SIZE,
.flags = PCI_REGION_IO,
},
};
static struct pci_region pcie_regions_1[] = {
{
.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
.size = CONFIG_SYS_PCIE2_MEM_SIZE,
.flags = PCI_REGION_MEM,
},
{
.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
.size = CONFIG_SYS_PCIE2_IO_SIZE,
.flags = PCI_REGION_IO,
},
};
void pci_init_board(void)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
volatile sysconf83xx_t *sysconf = &immr->sysconf;
volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
volatile law83xx_t *pcie_law = sysconf->pcielaw;
struct pci_region *reg[] = { pci_regions };
struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
volatile gpio83xx_t *gpio;
gpio = (gpio83xx_t *)&immr->gpio[0];
gpio->dat = MV_GPIO1_DAT;
gpio->odr = MV_GPIO1_ODE;
gpio->dir = MV_GPIO1_OUT;
gpio = (gpio83xx_t *)&immr->gpio[1];
gpio->dat = MV_GPIO2_DAT;
gpio->odr = MV_GPIO2_ODE;
gpio->dir = MV_GPIO2_OUT;
printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
immr->sysconf.sicrl);
/* Enable PCI_CLK[0:1] */
clk->occr |= 0xc0000000;
udelay(2000);
mergerbox_init_fpga();
mv_load_fpga();
mergerbox_tft_dim(0);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
udelay(2000);
mpc83xx_pci_init(1, reg);
/* Deassert the resets in the control register */
out_be32(&sysconf->pecr1, 0xE0008000);
out_be32(&sysconf->pecr2, 0xE0008000);
udelay(2000);
out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
mpc83xx_pcie_init(2, pcie_reg);
}

120
board/matrix_vision/mergerbox/sm107.c
Unescape View File

@ -1,120 +0,0 @@
/*
* Copyright (C) 2011 Matrix Vision GmbH
* Andre Schwarz <andre.schwarz@matrix-vision.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <ns16550.h>
#include <netdev.h>
#include <sm501.h>
#include <pci.h>
#include "../common/mv_common.h"
#ifdef CONFIG_VIDEO
static const SMI_REGS init_regs_800x480[] = {
/* set endianess to little endian */
{0x0005c, 0x00000000},
/* PCI drive 12mA */
{0x00004, 0x42401001},
/* current clock */
{0x0003c, 0x310a1818},
/* clocks for pm0... */
{0x00040, 0x0002184f},
{0x00044, 0x2a1a0a01},
/* GPIO */
{0x10008, 0x00000000},
{0x1000C, 0x00000000},
/* panel control regs */
{0x80000, 0x0f017106},
{0x80004, 0x0},
{0x80008, 0x0},
{0x8000C, 0x00000000},
{0x80010, 0x0c800c80},
/* width 0x320 */
{0x80014, 0x03200000},
/* height 0x1e0 */
{0x80018, 0x01E00000},
{0x8001C, 0x0},
{0x80020, 0x01df031f},
{0x80024, 0x041f031f},
{0x80028, 0x00800347},
{0x8002C, 0x020c01df},
{0x80030, 0x000201e9},
{0x80200, 0x00000000},
/* ZV[0:7] */
{0x00008, 0x00ff0000},
/* 24-Bit TFT */
{0x0000c, 0x3f000000},
{0, 0}
};
/*
* Returns SM107 register base address. First thing called in the driver.
*/
unsigned int board_video_init(void)
{
pci_dev_t devbusfn;
u32 addr;
devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
if (devbusfn != -1) {
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
(u32 *)&addr);
return addr & 0xfffffffe;
}
return 0;
}
/*
* Called after initializing the SM501 and before clearing the screen.
*/
void board_validate_screen(unsigned int base)
{
}
/*
* Returns SM107 framebuffer address
*/
unsigned int board_video_get_fb(void)
{
pci_dev_t devbusfn;
u32 addr;
devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
if (devbusfn != -1) {
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
(u32 *)&addr);
addr &= 0xfffffffe;
#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
#endif
return addr;
}
printf("board_video_get_fb(): FAILED\n");
return 0;
}
/*
* Return a pointer to the initialization sequence.
*/
const SMI_REGS *board_get_regs(void)
{
return init_regs_800x480;
}
int board_get_width(void)
{
return 800;
}
int board_get_height(void)
{
return 480;
}
#endif

1
board/matrix_vision/mvblm7/.gitignore vendored
Unescape View File

@ -1 +0,0 @@
bootscript.img

12
board/matrix_vision/mvblm7/Kconfig
Unescape View File

@ -1,12 +0,0 @@
if TARGET_MVBLM7
config SYS_BOARD
default "mvblm7"
config SYS_VENDOR
default "matrix_vision"
config SYS_CONFIG_NAME
default "MVBLM7"
endif

6
board/matrix_vision/mvblm7/MAINTAINERS
Unescape View File

@ -1,6 +0,0 @@
MVBLM7 BOARD
#M: Andre Schwarz <andre.schwarz@matrix-vision.de>
S: Orphan (since 2014-03)
F: board/matrix_vision/mvblm7/
F: include/configs/MVBLM7.h
F: configs/MVBLM7_defconfig

14
board/matrix_vision/mvblm7/Makefile
Unescape View File

@ -1,14 +0,0 @@
#
# Copyright (C) Freescale Semiconductor, Inc. 2006.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := mvblm7.o pci.o fpga.o
extra-y := bootscript.img
MKIMAGEFLAGS_bootscript.image := -T script -C none -n M7_script
$(obj)/bootscript.img: $(src)/bootscript
$(call cmd,mkimage)

84
board/matrix_vision/mvblm7/README.mvblm7
Unescape View File

@ -1,84 +0,0 @@
Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
-------------------------------------
1. Board Description
The mvBL-M7 is a 120x120mm single board computing platform
with strong focus on stereo image processing applications.
Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
on any port (requires add-on board).
2 System Components
2.1 CPU
Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
512MByte DDR-II memory @ 133MHz.
8 MByte Nor Flash on local bus.
2 Vitesse VSC8601 RGMII ethernet Phys.
1 USB host controller over ULPI I/F.
2 serial ports. Console running on ttyS0 @ 115200 8N1.
1 SD-Card slot connected to SPI.
System configuration (HRCW) is taken from I2C EEPROM.
2.2 PCI
A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
2.3 FPGA
Altera Cyclone-II EP2C20/35 with PCI DMA engines.
Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
2.3.1 I/O @ FPGA
2x8 Outputs : Infineon High-Side Switches to Main Supply.
2x8 Inputs : Programmable input threshold + trigger capabilities
2 dedicated flash interfaces for illuminator boards.
Cross trigger for chaining several boards.
2.4 I2C
Bus1:
MAX5381 DAC @ 0x60 for 1st digital input threshold.
LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
1st image sensor interface (slave addresses depend on sensor)
Bus2:
MAX5381 DAC @ 0x60 for 2nd digital input threshold.
2nd image sensor interface (slave addresses depend on sensor)
3 Flash layout.
reset vector is 0xFFF00100, i.e. "HIGHBOOT".
FF800000 environment
FF802000 redundant environment
FF804000 u-boot script image
FF806000 redundant u-boot script image
FF808000 device tree blob
FF80A000 redundant device tree blob
FF80C000 tbd.
FF80E000 tbd.
FF810000 kernel
FFC00000 root FS
FFF00000 u-boot
FFF80000 FPGA raw bit file
mtd partitions are propagated to linux kernel via device tree blob.
4 Booting
On startup the bootscript @ FF804000 is executed. This script can be
exchanged easily. Default boot mode is "boot from flash", i.e. system
works stand-alone.
This behaviour depends on some environment variables :
"netboot" : yes ->try dhcp/bootp and boot from network.
A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
DHCP server configuration, e.g. to provide different images to
different devices.
During netboot the system tries to get 3 image files:
1. Kernel - name + data is given during BOOTP.
2. Initrd - name is stored in "initrd_name"
3. device tree blob - name is stored in "dtb_name"
Fallback files are the flash versions.

43
board/matrix_vision/mvblm7/bootscript
Unescape View File

@ -1,43 +0,0 @@
echo
echo "==== running autoscript ===="
echo
setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
setenv ramkernel setenv kernel_boot \${loadaddr}
setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
setenv bootfromflash run flashkernel cpird ramparam addcons bootdtb
setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup
setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
if test ${console} = yes;
then
setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8
else
setenv addcons setenv bootargs \${bootargs} console=tty0
fi
setenv set_static_ip setenv ipaddr \${static_ipaddr}
setenv set_static_nm setenv netmask \${static_netmask}
setenv set_static_gw setenv gatewayip \${static_gateway}
setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs
if test ${autoscript_boot} != no;
then
if test ${netboot} = yes;
then
bootp
if test $? = 0;
then
echo "=== bootp succeeded -> netboot ==="
run set_ip
run getdtb rundtb bootfromnet ramparam addcons bootdtb
else
echo "=== netboot failed ==="
fi
fi
run set_static_ip set_static_nm set_static_gw set_ip
echo "=== bootfromflash ==="
run cpdtb rundtb bootfromflash
else
echo "=== boot stopped with autoscript_boot no ==="
fi

169
board/matrix_vision/mvblm7/fpga.c
Unescape View File

@ -1,169 +0,0 @@
/*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
* Keith Outwater, keith_outwater@mvis.com.
*
* (C) Copyright 2008
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ACEX1K.h>
#include <command.h>
#include "fpga.h"
#include "mvblm7.h"
#ifdef FPGA_DEBUG
#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args)
#else
#define fpga_debug(fmt, args...)
#endif
Altera_CYC2_Passive_Serial_fns altera_fns = {
fpga_null_fn,
fpga_config_fn,
fpga_status_fn,
fpga_done_fn,
fpga_wr_fn,
fpga_null_fn,
fpga_null_fn,
};
Altera_desc cyclone2 = {
Altera_CYC2,
passive_serial,
Altera_EP2C20_SIZE,
(void *) &altera_fns,
NULL,
0
};
DECLARE_GLOBAL_DATA_PTR;
int mvblm7_init_fpga(void)
{
fpga_debug("Initialize FPGA interface\n");
fpga_init();
fpga_add(fpga_altera, &cyclone2);
fpga_config_fn(0, 1, 0);
udelay(60);
return 1;
}
int fpga_null_fn(int cookie)
{
return 0;
}
int fpga_config_fn(int assert, int flush, int cookie)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
u32 dvo = gpio->dat;
fpga_debug("SET config : %s\n", assert ? "low" : "high");
if (assert)
dvo |= FPGA_CONFIG;
else
dvo &= ~FPGA_CONFIG;
if (flush)
gpio->dat = dvo;
return assert;
}
int fpga_done_fn(int cookie)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
int result = 0;
udelay(10);
fpga_debug("CONF_DONE check ... ");
if (gpio->dat & FPGA_CONF_DONE) {
fpga_debug("high\n");
result = 1;
} else
fpga_debug("low\n");
return result;
}
int fpga_status_fn(int cookie)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
int result = 0;
fpga_debug("STATUS check ... ");
if (gpio->dat & FPGA_STATUS) {
fpga_debug("high\n");
result = 1;
} else
fpga_debug("low\n");
return result;
}
int fpga_clk_fn(int assert_clk, int flush, int cookie)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
u32 dvo = gpio->dat;
fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low");
if (assert_clk)
dvo |= FPGA_CCLK;
else
dvo &= ~FPGA_CCLK;
if (flush)
gpio->dat = dvo;
return assert_clk;
}
static inline int _write_fpga(u8 val, int dump)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
int i;
u32 dvo = gpio->dat;
if (dump)
fpga_debug(" %02x -> ", val);
for (i = 0; i < 8; i++) {
dvo &= ~FPGA_CCLK;
gpio->dat = dvo;
dvo &= ~FPGA_DIN;
if (dump)
fpga_debug("%d ", val&1);
if (val & 1)
dvo |= FPGA_DIN;
gpio->dat = dvo;
dvo |= FPGA_CCLK;
gpio->dat = dvo;
val >>= 1;
}
if (dump)
fpga_debug("\n");
return 0;
}
int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
{
unsigned char *data = (unsigned char *) buf;
int i;
fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
for (i = 0; i < len; i++)
_write_fpga(data[i], 0);
fpga_debug("\n");
return FPGA_SUCCESS;
}

17
board/matrix_vision/mvblm7/fpga.h
Unescape View File

@ -1,17 +0,0 @@
/*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
* Keith Outwater, keith_outwater@mvis.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
extern int mvblm7_init_fpga(void);
extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
extern int fpga_status_fn(int cookie);
extern int fpga_config_fn(int assert, int flush, int cookie);
extern int fpga_done_fn(int cookie);
extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
extern int fpga_null_fn(int cookie);

136
board/matrix_vision/mvblm7/mvblm7.c
Unescape View File

@ -1,136 +0,0 @@
/*
* Copyright (C) Freescale Semiconductor, Inc. 2006.
*
* (C) Copyright 2008
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <pci.h>
#include <spi.h>
#include <asm/mmu.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include "../common/mv_common.h"
#include "mvblm7.h"
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
char *s = getenv("ddr_size");
msize = CONFIG_SYS_DDR_SIZE;
if (s) {
u32 env_ddr_size = simple_strtoul(s, NULL, 10);
if (env_ddr_size == 512)
msize = 512;
}
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1);
ddr_size = ddr_size >> 1, ddr_size_log2++) {
if (ddr_size & 1)
return -1;
}
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
LAWAR_SIZE);
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
asm("sync;isync");
udelay(600);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
asm("sync;isync");
udelay(500);
return msize;
}
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = fixed_sdram();
/* return total bus RAM size(bytes) */
return msize * 1024 * 1024;
}
int misc_init_r(void)
{
char *s = getenv("reset_env");
if (s) {
mv_reset_environment();
}
return 0;
}
int checkboard(void)
{
puts("Board: Matrix Vision mvBlueLYNX-M7\n");
return 0;
}
#ifdef CONFIG_HARD_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat &= ~MVBLM7_MMC_CS;
}
void spi_cs_deactivate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat |= ~MVBLM7_MMC_CS;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
}
#endif

20
board/matrix_vision/mvblm7/mvblm7.h
Unescape View File

@ -1,20 +0,0 @@
#ifndef __MVBC_H__
#define __MVBC_H__
#define MV_GPIO
#define FPGA_CONFIG 0x80000000
#define FPGA_CCLK 0x40000000
#define FPGA_DIN 0x20000000
#define FPGA_STATUS 0x10000000
#define FPGA_CONF_DONE 0x08000000
#define WD_WDI 0x00400000
#define WD_TS 0x00200000
#define MAN_RST 0x00100000
#define MV_GPIO_DAT (WD_TS)
#define MV_GPIO_OUT (FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|MVBLM7_MMC_CS)
#define MV_GPIO_ODE (FPGA_CONFIG|MAN_RST)
#endif

89
board/matrix_vision/mvblm7/pci.c
Unescape View File

@ -1,89 +0,0 @@
/*
* Copyright (C) Freescale Semiconductor, Inc. 2006.
*
* (C) Copyright 2008
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include <pci.h>
#include <mpc83xx.h>
#include <fpga.h>
#include "mvblm7.h"
#include "fpga.h"
#include "../common/mv_common.h"
DECLARE_GLOBAL_DATA_PTR;
static struct pci_region pci_regions[] = {
{
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
size: CONFIG_SYS_PCI1_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
size: CONFIG_SYS_PCI1_MMIO_SIZE,
flags: PCI_REGION_MEM
},
{
bus_start: CONFIG_SYS_PCI1_IO_BASE,
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
size: CONFIG_SYS_PCI1_IO_SIZE,
flags: PCI_REGION_IO
}
};
void pci_init_board(void)
{
int i;
volatile immap_t *immr;
volatile pcictrl83xx_t *pci_ctrl;
volatile gpio83xx_t *gpio;
volatile clk83xx_t *clk;
volatile law83xx_t *pci_law;
struct pci_region *reg[] = { pci_regions };
immr = (immap_t *) CONFIG_SYS_IMMR;
clk = (clk83xx_t *) &immr->clk;
pci_ctrl = immr->pci_ctrl;
pci_law = immr->sysconf.pcilaw;
gpio = (volatile gpio83xx_t *)&immr->gpio[0];
gpio->dat = MV_GPIO_DAT;
gpio->odr = MV_GPIO_ODE;
gpio->dir = MV_GPIO_OUT;
printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
immr->sysconf.sicrl);
mvblm7_init_fpga();
mv_load_fpga();
gpio->dir = MV_GPIO_OUT & ~(FPGA_DIN|FPGA_CCLK);
/* Enable PCI_CLK_OUTPUTs 0 and 1 with 1:1 clocking */
clk->occr = 0xc0000000;
pci_ctrl[0].gcr = 0;
udelay(2000);
pci_ctrl[0].gcr = 1;
for (i = 0; i < 1000; ++i)
udelay(1000);
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_1GB;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
mpc83xx_pci_init(1, reg);
}

3
configs/MERGERBOX_defconfig
Unescape View File

@ -1,3 +0,0 @@
CONFIG_PPC=y
CONFIG_MPC83xx=y
CONFIG_TARGET_MERGERBOX=y

3
configs/MVBLM7_defconfig
Unescape View File

@ -1,3 +0,0 @@
CONFIG_PPC=y
CONFIG_MPC83xx=y
CONFIG_TARGET_MVBLM7=y

2
doc/README.scrapyard
Unescape View File

@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
MERGERBOX powerpc mpc83xx - - Andre Schwarz <andre.schwarz@matrix-vision.de>
MVBLM7 powerpc mpc83xx - - Andre Schwarz <andre.schwarz@matrix-vision.de>
bluestone powerpc ppc4xx - - Tirumala Marri <tmarri@apm.com>
CRAYL1 powerpc ppc4xx - - David Updegraff <dave@cray.com>
KAREF powerpc ppc4xx - - Travis Sawyer <travis.sawyer@sandburst.com>

599
include/configs/MERGERBOX.h
Unescape View File

@ -1,599 +0,0 @@
/*
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Copyright (C) 2011 Matrix Vision GmbH
* Andre Schwarz <andre.schwarz@matrix-vision.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <version.h>
/*
* High Level Configuration Options
*/
#define CONFIG_E300 1
#define CONFIG_MPC837x 1
#define CONFIG_MPC8377 1
#define CONFIG_SYS_TEXT_BASE 0xFC000000
#define CONFIG_PCI 1
#define CONFIG_PCI_INDIRECT_BRIDGE 1
#define CONFIG_MASK_AER_AO
#define CONFIG_DISPLAY_AER_FULL
#define CONFIG_MISC_INIT_R
/*
* On-board devices
*/
#define CONFIG_TSEC_ENET
/*
* System Clock Setup
*/
#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
#define CONFIG_PCIE
#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
/*
* Hardware Reset Configuration Word stored in EEPROM.
*/
#define CONFIG_SYS_HRCW_LOW 0
#define CONFIG_SYS_HRCW_HIGH 0
/* Arbiter Configuration Register */
#define CONFIG_SYS_ACR_PIPE_DEP 3
#define CONFIG_SYS_ACR_RPTCNT 3
/* System Priority Control Regsiter */
#define CONFIG_SYS_SPCR_TSECEP 3
/* System Clock Configuration Register */
#define CONFIG_SYS_SCCR_TSEC1CM 3
#define CONFIG_SYS_SCCR_TSEC2CM 0
#define CONFIG_SYS_SCCR_SDHCCM 3
#define CONFIG_SYS_SCCR_ENCCM 3 /* also clock for I2C-1 */
#define CONFIG_SYS_SCCR_USBDRCM CONFIG_SYS_SCCR_ENCCM /* must match */
#define CONFIG_SYS_SCCR_PCIEXP1CM 3
#define CONFIG_SYS_SCCR_PCIEXP2CM 3
#define CONFIG_SYS_SCCR_PCICM 1
#define CONFIG_SYS_SCCR_SATACM 0xFF
/*
* System IO Config
*/
#define CONFIG_SYS_SICRH 0x087c0000
#define CONFIG_SYS_SICRL 0x40000000
/*
* Output Buffer Impedance
*/
#define CONFIG_SYS_OBIR 0x30000000
/*
* IMMR new address
*/
#define CONFIG_SYS_IMMR 0xE0000000
/*
* DDR Setup
*/
#define CONFIG_SYS_DDR_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_83XX_DDR_USES_CS0
#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN | DDRCDR_PZ_HIZ |\
DDRCDR_NZ_HIZ | DDRCDR_ODT |\
DDRCDR_Q_DRN)
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
#define CONFIG_SYS_DDR_MODE_WEAK
#define CONFIG_SYS_DDR_WRITE_DATA_DELAY 2
#define CONFIG_SYS_DDR_CPO 0x1f
/* SPD table located at offset 0x20 in extended adressing ROM
* used for HRCW fetch after power-on reset
*/
#define CONFIG_SPD_EEPROM
#define SPD_EEPROM_ADDRESS 0x50
#define SPD_EEPROM_OFFSET 0x20
#define SPD_EEPROM_ADDR_LEN 2
/*
* The reserved memory
*/
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (512*1024)
#define CONFIG_SYS_MALLOC_LEN (512*1024)
/*
* Initial RAM Base Address Setup
*/
#define CONFIG_SYS_INIT_RAM_LOCK 1
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\
GENERATED_GBL_DATA_SIZE)
/*
* Local Bus Configuration & Clock Setup
*/
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
#define CONFIG_SYS_LBC_LBCR 0x00000000
#define CONFIG_FSL_ELBC 1
/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_SIZE 64
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB)
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 |\
BR_MS_GPCM | BR_V)
#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\
OR_GPCM_XACS | OR_GPCM_SCY_15 |\
OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET |\
OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 512
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
/*
* NAND Flash on the Local Bus
*/
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BASE 0xE0600000
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | BR_DECC_CHK_GEN |\
BR_PS_8 | BR_MS_FCM | BR_V)
#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST |\
OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\
OR_FCM_TRLX | OR_FCM_EHTR)
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB)
/*
* Serial Port
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
#define CONFIG_CONSOLE ttyS0
#define CONFIG_BAUDRATE 115200
/* SERDES */
#define CONFIG_FSL_SERDES
#define CONFIG_FSL_SERDES1 0xe3000
#define CONFIG_FSL_SERDES2 0xe3100
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED 400000
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
/*
* General PCI
* Addresses are mapped 1-1.
*/
#define CONFIG_SYS_PCI_MEM_BASE 0x80000000
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
#define CONFIG_SYS_PCI_MEM_SIZE (256 << 20)
#define CONFIG_SYS_PCI_MMIO_BASE 0x90000000
#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
#define CONFIG_SYS_PCI_MMIO_SIZE (256 << 20)
#define CONFIG_SYS_PCI_IO_BASE 0x00000000
#define CONFIG_SYS_PCI_IO_PHYS 0xE0300000
#define CONFIG_SYS_PCI_IO_SIZE (1 << 20)
#ifdef CONFIG_PCIE
#define CONFIG_SYS_PCIE1_BASE 0xA0000000
#define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000
#define CONFIG_SYS_PCIE1_CFG_SIZE (128 << 20)
#define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000
#define CONFIG_SYS_PCIE1_MEM_SIZE (256 << 20)
#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000
#define CONFIG_SYS_PCIE1_IO_SIZE (8 << 20)
#define CONFIG_SYS_PCIE2_BASE 0xC0000000
#define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000
#define CONFIG_SYS_PCIE2_CFG_SIZE (128 << 20)
#define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000
#define CONFIG_SYS_PCIE2_MEM_SIZE (256 << 20)
#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000
#define CONFIG_SYS_PCIE2_IO_SIZE (8 << 20)
#endif
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
/*
* TSEC
*/
#define CONFIG_GMII /* MII PHY management */
#define CONFIG_SYS_VSC8601_SKEWFIX
#define CONFIG_SYS_VSC8601_SKEW_TX 3
#define CONFIG_SYS_VSC8601_SKEW_RX 3
#define CONFIG_TSEC1
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#define TSEC1_PHY_ADDR 0x10
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC1_PHYIDX 0
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_HAS_ETH0
/*
* SATA
*/
#define CONFIG_LIBATA
#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1_OFFSET 0x18000
#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#define CONFIG_SATA2
#define CONFIG_SYS_SATA2_OFFSET 0x19000
#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_EXT2
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_VENDOREX
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_RANDOM_DELAY
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_LIB_RAND
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#define CONFIG_CMD_USB
#define CONFIG_CMD_SPI
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_SATA
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND"
#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)"
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_LOAD_ADDR 0x2000000
#define CONFIG_LOADADDR 0x4000000
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_LOADS_ECHO 1
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
#define CONFIG_SYS_MEMTEST_START (60<<20)
#define CONFIG_SYS_MEMTEST_END (70<<20)
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
/*
* Core HID Setup
*/
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
HID0_ENABLE_INSTRUCTION_CACHE)
#define CONFIG_SYS_HID2 HID2_HBE
/*
* MMU Setup
*/
#define CONFIG_HIGH_BATS 1
/* DDR: cache cacheable */
#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM | BATL_PP_RW |\
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\
BATU_VP)
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
/* unused */
#define CONFIG_SYS_IBAT1L (0)
#define CONFIG_SYS_IBAT1U (0)
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_RW |\
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\
BATU_VP)
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* unused */
#define CONFIG_SYS_IBAT3L (0)
#define CONFIG_SYS_IBAT3U (0)
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW |\
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* Stack in dcache: cacheable, no memory coherence */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
/* PCI MEM space: cacheable */
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_RW |\
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
/* PCI MMIO space: cache-inhibit and guarded */
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
/*
* I2C EEPROM settings
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_SIZE 0x4000
/*
* Environment Configuration
*/
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0xFFD00000
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
/*
* Video
*/
#define CONFIG_VIDEO
#define CONFIG_VIDEO_SM501_PCI
#define VIDEO_FB_LITTLE_ENDIAN
#define CONFIG_CMD_BMP
#define CONFIG_VIDEO_SM501
#define CONFIG_VIDEO_SM501_32BPP
#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
/*
* SPI
*/
#define CONFIG_MPC8XXX_SPI
/*
* USB
*/
#define CONFIG_SYS_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_STORAGE
#define CONFIG_USB_KEYBOARD
/*
*
*/
#define CONFIG_BOOTDELAY 5
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1000
#define MV_CI "MergerBox"
#define MV_VCI "MergerBox"
#define MV_FPGA_DATA 0xfc100000
#define MV_FPGA_SIZE 0x00200000
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define MV_KERNEL_ADDR_RAM 0x02800000
#define MV_DTB_ADDR_RAM 0x00600000
#define MV_INITRD_ADDR_RAM 0x01000000
#define MV_FITADDR 0xfc300000
#define MV_SPLAH_ADDR 0xffe00000
#define CONFIG_BOOTCOMMAND "run i2c_init;if test ${boot_sqfs} -eq 1;"\
"then; run fitboot;else;run ubiboot;fi;"
#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0"\
"stdin=serial\0"\
"stdout=serial\0"\
"stderr=serial\0"\
"boot_sqfs=1\0"\
"usb_dr_mode=host\0"\
"bootfile=MergerBox.fit\0"\
"baudrate=" __stringify(CONFIG_BAUDRATE) "\0"\
"fpga=0\0"\
"fpgadata=" __stringify(MV_FPGA_DATA) "\0"\
"fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0"\
"mv_kernel_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0"\
"mv_initrd_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0"\
"mv_dtb_ram=" __stringify(MV_DTB_ADDR_RAM) "\0"\
"uboota=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"\
"fitaddr=" __stringify(MV_FITADDR) "\0"\
"mv_version=" U_BOOT_VERSION "\0"\
"mtdids=" MTDIDS_DEFAULT "\0"\
"mtdparts=" MTDPARTS_DEFAULT "\0"\
"dhcp_client_id=" MV_CI "\0"\
"dhcp_vendor-class-identifier=" MV_VCI "\0"\
"upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\
"protect off all;erase $uboota +0xC0000;"\
"cp.b $loadaddr $uboota $filesize\0"\
"upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\
"cp.b $loadaddr $fpgadata $filesize\0"\
"upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\
"cp.b $loadaddr $fitaddr $filesize\0"\
"addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\
"rootfstype=squashfs\0"\
"addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\
"rootfstype=ubifs\0"\
"addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\
"rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\
"netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\
"netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\
"ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\
"doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\
"fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\
"imxtract $fitaddr ramdisk $mv_initrd_ram;"\
"imxtract $fitaddr fdt $mv_dtb_ram\0"\
"fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\
"fitboot=run fitprep fdtprep addsqshrfs doboot\0"\
"i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\
"i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\
"i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\
"i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\
"i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\
"init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\
"i2c mw 21 2 ff;i2c mw 21 3 3c\0"\
"splashimage=" __stringify(MV_SPLAH_ADDR) "\0"\
""
/*
* FPGA
*/
#define CONFIG_FPGA_COUNT 1
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#endif

491
include/configs/MVBLM7.h
Unescape View File

@ -1,491 +0,0 @@
/*
* Copyright (C) Matrix Vision GmbH 2008
*
* Matrix Vision mvBlueLYNX-M7 configuration file
* based on Freescale's MPC8349ITX.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <version.h>
/*
* High Level Configuration Options
*/
#define CONFIG_E300 1
#define CONFIG_MPC834x 1
#define CONFIG_MPC8343 1
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#define CONFIG_SYS_IMMR 0xE0000000
#define CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_TSEC_ENET
#define CONFIG_MPC8XXX_SPI
#define CONFIG_HARD_SPI
#define MVBLM7_MMC_CS 0x04000000
#define CONFIG_MISC_INIT_R
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED 100000
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
#define CONFIG_SYS_FSL_I2C2_SPEED 100000
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
/*
* DDR Setup
*/
#undef CONFIG_SPD_EEPROM
#define CONFIG_SYS_DDR_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_83XX_DDR_USES_CS0 1
#define CONFIG_SYS_MEMTEST_START (60<<20)
#define CONFIG_SYS_MEMTEST_END (70<<20)
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDRCDR (DDRCDR_PZ_HIZ \
| DDRCDR_NZ_HIZ \
| DDRCDR_Q_DRN)
/* 0x22000001 */
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
#define CONFIG_SYS_DDR_SIZE 512
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
#define CONFIG_SYS_DDR_TIMING_0 0x00260802
#define CONFIG_SYS_DDR_TIMING_1 0x3837c322
#define CONFIG_SYS_DDR_TIMING_2 0x0f9848c6
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
#define CONFIG_SYS_DDR_SDRAM_CFG 0x43080008
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
#define CONFIG_SYS_DDR_INTERVAL 0x02000100
#define CONFIG_SYS_DDR_MODE 0x04040242
#define CONFIG_SYS_DDR_MODE2 0x00800000
/* Flash */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_BASE 0xFF800000
#define CONFIG_SYS_FLASH_SIZE 8
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
| BR_PS_16 \
| BR_MS_GPCM \
| BR_V)
#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
| OR_GPCM_ACS_DIV2 \
| OR_GPCM_XACS \
| OR_GPCM_SCY_15 \
| OR_GPCM_TRLX_SET \
| OR_GPCM_EHTR_SET \
| OR_GPCM_EAD)
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB)
/*
* U-Boot memory configuration
*/
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
/*
* Local Bus LCRR and LBCR regs
* LCRR: DLL bypass, Clock divider is 4
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/* LB sdram refresh timer, about 6us */
#define CONFIG_SYS_LBC_LSRT 0x32000000
/* LB refresh timer prescal, 266MHz/32*/
#define CONFIG_SYS_LBC_MRTPR 0x20000000
/*
* Serial Port
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_CONSOLE ttyS0
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define MV_DTB_NAME "mvblm7.dtb"
/*
* PCI
*/
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000
#define CONFIG_SYS_PCI1_MMIO_BASE \
(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000
#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000
#define CONFIG_NET_RETRY_COUNT 3
#define CONFIG_PCI_66M
#define CONFIG_83XX_CLKIN 66666667
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
/* TSEC */
#define CONFIG_GMII
#define CONFIG_SYS_VSC8601_SKEWFIX
#define CONFIG_SYS_VSC8601_SKEW_TX 3
#define CONFIG_SYS_VSC8601_SKEW_RX 3
#define CONFIG_TSEC1
#define CONFIG_TSEC2
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_FEC1_PHY_NORXERR
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
#define TSEC1_PHY_ADDR 0x10
#define TSEC1_PHYIDX 0
#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
#define CONFIG_FEC2_PHY_NORXERR
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
#define TSEC2_PHY_ADDR 0x11
#define TSEC2_PHYIDX 0
#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_BOOTP_VENDOREX
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_RANDOM_DELAY
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_LIB_RAND
/* USB */
#define CONFIG_SYS_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
/*
* Environment
*/
#undef CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0xFF800000
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x2000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_PCI
#define CONFIG_CMD_I2C
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_USB
#define CONFIG_DOS_PARTITION
#undef CONFIG_WATCHDOG
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_HUSH_PARSER
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x2000000
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 0x200000
#define CONFIG_SYS_PROMPT "mvBL-M7> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
#define CONFIG_SYS_HRCW_LOW 0x0
#define CONFIG_SYS_HRCW_HIGH 0x0
/*
* System performance
*/
#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
/* clocking */
#define CONFIG_SYS_SCCR_ENCCM 0
#define CONFIG_SYS_SCCR_USBMPHCM 0
#define CONFIG_SYS_SCCR_USBDRCM 2
#define CONFIG_SYS_SCCR_TSEC1CM 1
#define CONFIG_SYS_SCCR_TSEC2CM 1
#define CONFIG_SYS_SICRH 0x1fef0003
#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL (CONFIG_SYS_HID0_INIT | \
HID0_ENABLE_INSTRUCTION_CACHE)
#define CONFIG_SYS_HID2 HID2_HBE
#define CONFIG_HIGH_BATS 1
/* DDR */
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \
| BATL_PP_RW \
| BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
| BATU_BL_256M \
| BATU_VS \
| BATU_VP)
/* PCI */
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \
| BATL_PP_RW \
| BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \
| BATU_BL_256M \
| BATU_VS \
| BATU_VP)
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \
| BATL_PP_RW \
| BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \
| BATU_BL_256M \
| BATU_VS \
| BATU_VP)
/* no PCI2 */
#define CONFIG_SYS_IBAT3L 0
#define CONFIG_SYS_IBAT3U 0
#define CONFIG_SYS_IBAT4L 0
#define CONFIG_SYS_IBAT4U 0
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
| BATL_PP_RW \
| BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
| BATU_BL_256M \
| BATU_VS \
| BATU_VP)
/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
#define CONFIG_SYS_IBAT6L (0xF0000000 \
| BATL_PP_RW \
| BATL_MEMCOHERENCE \
| BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT6U (0xF0000000 \
| BATU_BL_256M \
| BATU_VS \
| BATU_VP)
#define CONFIG_SYS_IBAT7L 0
#define CONFIG_SYS_IBAT7U 0
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
/*
* Environment Configuration
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_NETDEV eth0
/* Default path and filenames */
#define CONFIG_BOOTDELAY 5
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1000
#define MV_CI "mvBL-M7"
#define MV_VCI "mvBL-M7"
#define MV_FPGA_DATA 0xfff40000
#define MV_FPGA_SIZE 0
#define MV_KERNEL_ADDR 0xff810000
#define MV_INITRD_ADDR 0xffb00000
#define MV_SCRIPT_ADDR 0xff804000
#define MV_SCRIPT_ADDR2 0xff806000
#define MV_DTB_ADDR 0xff808000
#define MV_INITRD_LENGTH 0x00400000
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define MV_KERNEL_ADDR_RAM 0x00100000
#define MV_DTB_ADDR_RAM 0x00600000
#define MV_INITRD_ADDR_RAM 0x01000000
#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; " \
"then source ${script_addr}; " \
"else source ${script_addr2}; " \
"fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0" \
"baudrate=" __stringify(CONFIG_BAUDRATE) "\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"fpga=0\0" \
"fpgadata=" __stringify(MV_FPGA_DATA) "\0" \
"fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0" \
"script_addr=" __stringify(MV_SCRIPT_ADDR) "\0" \
"script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0" \
"mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0" \
"mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0" \
"mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0" \
"mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0" \
"mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0" \
"dtb_name=" __stringify(MV_DTB_NAME) "\0" \
"mv_version=" U_BOOT_VERSION "\0" \
"dhcp_client_id=" MV_CI "\0" \
"dhcp_vendor-class-identifier=" MV_VCI "\0" \
"netretry=no\0" \
"use_static_ipaddr=no\0" \
"static_ipaddr=192.168.90.10\0" \
"static_netmask=255.255.255.0\0" \
"static_gateway=0.0.0.0\0" \
"initrd_name=uInitrd.mvBL-M7-rfs\0" \
"zcip=no\0" \
"netboot=yes\0" \
"mvtest=Ff\0" \
"tried_bootfromflash=no\0" \
"tried_bootfromnet=no\0" \
"bootfile=mvblm72625.boot\0" \
"use_dhcp=yes\0" \
"gev_start=yes\0" \
"mvbcdma_debug=0\0" \
"mvbcia_debug=0\0" \
"propdev_debug=0\0" \
"gevss_debug=0\0" \
"watchdog=0\0" \
"usb_dr_mode=host\0" \
"sensor_cnt=2\0" \
""
#define CONFIG_FPGA_COUNT 1
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#endif
Write Preview
Loading…
Cancel
Save