Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

OMAP5: Configure the io settings for omap5432 uevm board

Browse Source 
This patch adds the IO settings required for OMAP5432 uevm's DDR3 pads

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
master
Lokesh Vutla 13 years ago committed by Albert ARIBAUD
parent 0a0bf7b217
commit eb4e18e89e
2 changed files with 93 additions and 20 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 98
      arch/arm/cpu/armv7/omap5/hwinit.c
  2. 15
      arch/arm/include/asm/arch-omap5/omap.h

98
arch/arm/cpu/armv7/omap5/hwinit.c
Unescape View File

@ -52,6 +52,81 @@ static struct gpio_bank gpio_bank_54xx[6] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
#ifdef CONFIG_SPL_BUILD
/* LPDDR2 specific IO settings */
static void io_settings_lpddr2(void)
{
struct omap_sys_ctrl_regs *ioregs_base =
(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch1_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch1_1));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch2_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch2_1));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
&(ioregs_base->control_lpddr2ch1_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
&(ioregs_base->control_lpddr2ch1_1));
writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
&(ioregs_base->control_ddrio_0));
writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
&(ioregs_base->control_ddrio_1));
writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
&(ioregs_base->control_ddrio_2));
}
/* DDR3 specific IO settings */
static void io_settings_ddr3(void)
{
u32 io_settings = 0;
struct omap_sys_ctrl_regs *ioregs_base =
(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddr3ch1_0));
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddrch1_0));
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddrch1_1));
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddr3ch2_0));
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddrch2_0));
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
&(ioregs_base->control_ddrch2_1));
writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
&(ioregs_base->control_ddrio_0));
writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
&(ioregs_base->control_ddrio_1));
writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
&(ioregs_base->control_ddrio_2));
/* omap5432 does not use lpddr2 */
writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
&(ioregs_base->control_emif1_sdram_config_ext));
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
&(ioregs_base->control_emif2_sdram_config_ext));
/* Disable DLL select */
io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
& 0xFFEFFFFF);
writel(io_settings,
&(ioregs_base->control_port_emif1_sdram_config));
io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
& 0xFFEFFFFF);
writel(io_settings,
&(ioregs_base->control_port_emif2_sdram_config));
}
/*
* Some tuning of IOs for optimal power and performance
*/
@ -115,25 +190,10 @@ void do_io_settings(void)
(sc_fast << 17) | (sc_fast << 14);
writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
/* LPDDR2 io settings */
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch1_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch1_1));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch2_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
&(ioregs_base->control_ddrch2_1));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
&(ioregs_base->control_lpddr2ch1_0));
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
&(ioregs_base->control_lpddr2ch1_1));
writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
&(ioregs_base->control_ddrio_0));
writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
&(ioregs_base->control_ddrio_1));
writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
&(ioregs_base->control_ddrio_2));
if (omap_revision() <= OMAP5430_ES1_0)
io_settings_lpddr2();
else
io_settings_ddr3();
/* Efuse settings */
writel(EFUSE_1, &(ioregs_base->control_efuse_1));

15
arch/arm/include/asm/arch-omap5/omap.h
Unescape View File

@ -179,7 +179,14 @@ struct omap_sys_ctrl_regs {
u32 control_srcomp_east_side; /*0x4A002E7C*/
u32 control_srcomp_west_side; /*0x4A002E80*/
u32 control_srcomp_code_latch; /*0x4A002E84*/
u32 pad4[3680198];
u32 pad4[3679394];
u32 control_port_emif1_sdram_config; /*0x4AE0C110*/
u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/
u32 control_port_emif2_sdram_config; /*0x4AE0C118*/
u32 pad5[10];
u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */
u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */
u32 pad6[789];
u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
u32 control_padconf_mode; /* 0x4AE0CDA8 */
@ -234,6 +241,12 @@ struct omap_sys_ctrl_regs {
#define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084
#define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL 0x7C7C7C6C
#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL 0x64646464
#define DDR_IO_0_VREF_CELLS_DDR3_VALUE 0xBAE8C631
#define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0
#define EFUSE_1 0x45145100
#define EFUSE_2 0x45145100
#define EFUSE_3 0x45145100

Write Preview
Loading…
Cancel
Save