This option is pretty old. It predates CONFIG_SYS_I2C which is itself deprecated in favour of driver model. Disable it for all boards. Also drop I2C options which depend on this. Signed-off-by: Simon Glass <sjg@chromium.org>master
Simon Glass
8 years ago
committed by
Heiko Schocher
parent
22f3368e71
commit
eb5ba3aefd
@ -0,0 +1,176 @@ |
||||
/*
|
||||
* (C) Copyright 2009 |
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __MANROLAND_MPC52XX__COMMON_H |
||||
#define __MANROLAND_MPC52XX__COMMON_H |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
#define CONFIG_MPC5200 1 /* MPC5200 CPU */ |
||||
|
||||
/* ... running at 33.000000MHz */ |
||||
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 |
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
||||
|
||||
/*
|
||||
* Serial console configuration |
||||
*/ |
||||
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ |
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\ |
||||
230400 } |
||||
|
||||
#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */ |
||||
# define CONFIG_SYS_LOWBOOT 1 |
||||
#endif |
||||
|
||||
/*
|
||||
* IPB Bus clocking configuration. |
||||
*/ |
||||
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
||||
|
||||
/*
|
||||
* Flash configuration |
||||
*/ |
||||
#define CONFIG_SYS_FLASH_BASE 0xFF800000 |
||||
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ |
||||
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */ |
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks |
||||
(= chip selects) */ |
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/ |
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/ |
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER |
||||
#define CONFIG_SYS_FLASH_CFI |
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO |
||||
#define CONFIG_SYS_FLASH_CFI_AMD_RESET |
||||
|
||||
/*
|
||||
* Environment settings |
||||
*/ |
||||
#define CONFIG_ENV_IS_IN_FLASH 1 |
||||
#define CONFIG_ENV_SIZE 0x4000 |
||||
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) |
||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
||||
|
||||
/*
|
||||
* Memory map |
||||
*/ |
||||
#define CONFIG_SYS_MBAR 0xF0000000 |
||||
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 |
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ |
||||
GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
||||
#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */ |
||||
#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */ |
||||
|
||||
/* Settings for XLB = 132 MHz */ |
||||
#define SDRAM_DDR 1 |
||||
#define SDRAM_MODE 0x018D0000 |
||||
#define SDRAM_EMODE 0x40090000 |
||||
#define SDRAM_CONTROL 0x714f0f00 |
||||
#define SDRAM_CONFIG1 0x73722930 |
||||
#define SDRAM_CONFIG2 0x47770000 |
||||
#define SDRAM_TAPDELAY 0x10000000 |
||||
|
||||
/* Use ON-Chip SRAM until RAM will be available */ |
||||
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM |
||||
#ifdef CONFIG_POST |
||||
/* preserve space for the post_word at end of on-chip SRAM */ |
||||
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE |
||||
#else |
||||
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE |
||||
#endif |
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) |
||||
# define CONFIG_SYS_RAMBOOT 1 |
||||
#endif |
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (192 << 10) |
||||
#define CONFIG_SYS_MALLOC_LEN (512 << 10) |
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) |
||||
|
||||
/*
|
||||
* Ethernet configuration |
||||
*/ |
||||
#define CONFIG_MPC5xxx_FEC 1 |
||||
#define CONFIG_MPC5xxx_FEC_MII100 |
||||
#define CONFIG_PHY_ADDR 0x00 |
||||
#define CONFIG_MII 1 |
||||
|
||||
/*use Hardware WDT */ |
||||
#define CONFIG_HW_WATCHDOG |
||||
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
||||
#endif |
||||
|
||||
/*
|
||||
* Various low-level settings |
||||
*/ |
||||
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI |
||||
#define CONFIG_SYS_HID0_FINAL HID0_ICE |
||||
|
||||
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE |
||||
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE |
||||
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE |
||||
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE |
||||
|
||||
/* 8Mbit SRAM @0x80100000 */ |
||||
#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE |
||||
|
||||
#define CONFIG_SYS_CS_BURST 0x00000000 |
||||
#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff Supports IDE harddisk |
||||
*----------------------------------------------------------------------- |
||||
*/ |
||||
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ |
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */ |
||||
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
||||
|
||||
#define CONFIG_IDE_PREINIT 1 |
||||
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
||||
|
||||
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA |
||||
|
||||
/* Offset for data I/O */ |
||||
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) |
||||
|
||||
/* Offset for normal register accesses */ |
||||
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) |
||||
|
||||
/* Offset for alternate registers */ |
||||
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) |
||||
|
||||
/* Interval between registers */ |
||||
#define CONFIG_SYS_ATA_STRIDE 4 |
||||
|
||||
#define CONFIG_ATAPI 1 |
||||
|
||||
#define OF_CPU "PowerPC,5200@0" |
||||
#define OF_SOC "soc5200@f0000000" |
||||
#define OF_TBCLK (bd->bi_busfreq / 4) |
||||
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" |
||||
#define CONFIG_OF_IDE_FIXUP |
||||
|
||||
#endif /* __MANROLAND_MPC52XX__COMMON_H */ |
||||
Loading…
Reference in new issue