diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt index 3720274..a0df9a7 100644 --- a/doc/driver-model/serial-howto.txt +++ b/doc/driver-model/serial-howto.txt @@ -6,7 +6,6 @@ ones remain: serial_bfin.c serial_pxa.c - serial_s3c24x0.c The deadline for this work was the end of January 2016. If no one steps forward to convert these, at some point there may come a patch to remove them! diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 21b1292..8430668 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_MESON_SERIAL) += serial_meson.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o endif -obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o obj-$(CONFIG_SCIF_CONSOLE) += serial_sh.o diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c deleted file mode 100644 index 0f0878a..0000000 --- a/drivers/serial/serial_s3c24x0.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SERIAL1 -#define UART_NR S3C24X0_UART0 - -#elif defined(CONFIG_SERIAL2) -#define UART_NR S3C24X0_UART1 - -#elif defined(CONFIG_SERIAL3) -#define UART_NR S3C24X0_UART2 - -#else -#error "Bad: you didn't configure serial ..." -#endif - -#include -#include - -/* Multi serial device functions */ -#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \ - int s3serial##port##_init(void) \ - { \ - return serial_init_dev(port); \ - } \ - void s3serial##port##_setbrg(void) \ - { \ - serial_setbrg_dev(port); \ - } \ - int s3serial##port##_getc(void) \ - { \ - return serial_getc_dev(port); \ - } \ - int s3serial##port##_tstc(void) \ - { \ - return serial_tstc_dev(port); \ - } \ - void s3serial##port##_putc(const char c) \ - { \ - serial_putc_dev(port, c); \ - } \ - void s3serial##port##_puts(const char *s) \ - { \ - serial_puts_dev(port, s); \ - } - -#define INIT_S3C_SERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = s3serial##port##_init, \ - .stop = NULL, \ - .setbrg = s3serial##port##_setbrg, \ - .getc = s3serial##port##_getc, \ - .tstc = s3serial##port##_tstc, \ - .putc = s3serial##port##_putc, \ - .puts = s3serial##port##_puts, \ -} - -static void _serial_setbrg(const int dev_index) -{ - struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - unsigned int reg = 0; - int i; - - /* value is calculated so : (int)(PCLK/16./baudrate) -1 */ - reg = get_PCLK() / (16 * gd->baudrate) - 1; - - writel(reg, &uart->ubrdiv); - for (i = 0; i < 100; i++) - /* Delay */ ; -} - -static inline void serial_setbrg_dev(unsigned int dev_index) -{ - _serial_setbrg(dev_index); -} - -/* Initialise the serial port. The settings are always 8 data bits, no parity, - * 1 stop bit, no start bits. - */ -static int serial_init_dev(const int dev_index) -{ - struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - - /* FIFO enable, Tx/Rx FIFO clear */ - writel(0x07, &uart->ufcon); - writel(0x0, &uart->umcon); - - /* Normal,No parity,1 stop,8 bit */ - writel(0x3, &uart->ulcon); - /* - * tx=level,rx=edge,disable timeout int.,enable rx error int., - * normal,interrupt or polling - */ - writel(0x245, &uart->ucon); - - _serial_setbrg(dev_index); - - return (0); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int _serial_getc(const int dev_index) -{ - struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - - while (!(readl(&uart->utrstat) & 0x1)) - /* wait for character to arrive */ ; - - return readb(&uart->urxh) & 0xff; -} - -static inline int serial_getc_dev(unsigned int dev_index) -{ - return _serial_getc(dev_index); -} - -/* - * Output a single byte to the serial port. - */ -static void _serial_putc(const char c, const int dev_index) -{ - struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); - - while (!(readl(&uart->utrstat) & 0x2)) - /* wait for room in the tx FIFO */ ; - - writeb(c, &uart->utxh); -} - -static inline void serial_putc_dev(unsigned int dev_index, const char c) -{ - _serial_putc(c, dev_index); -} - -/* - * Test whether a character is in the RX buffer - */ -static int _serial_tstc(const int dev_index) -{ - struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - - return readl(&uart->utrstat) & 0x1; -} - -static inline int serial_tstc_dev(unsigned int dev_index) -{ - return _serial_tstc(dev_index); -} - -static void _serial_puts(const char *s, const int dev_index) -{ - while (*s) { - _serial_putc(*s++, dev_index); - } -} - -static inline void serial_puts_dev(int dev_index, const char *s) -{ - _serial_puts(s, dev_index); -} - -DECLARE_S3C_SERIAL_FUNCTIONS(0); -struct serial_device s3c24xx_serial0_device = -INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0"); -DECLARE_S3C_SERIAL_FUNCTIONS(1); -struct serial_device s3c24xx_serial1_device = -INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1"); -DECLARE_S3C_SERIAL_FUNCTIONS(2); -struct serial_device s3c24xx_serial2_device = -INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2"); - -__weak struct serial_device *default_serial_console(void) -{ -#if defined(CONFIG_SERIAL1) - return &s3c24xx_serial0_device; -#elif defined(CONFIG_SERIAL2) - return &s3c24xx_serial1_device; -#elif defined(CONFIG_SERIAL3) - return &s3c24xx_serial2_device; -#else -#error "CONFIG_SERIAL? missing." -#endif -} - -void s3c24xx_serial_initialize(void) -{ - serial_register(&s3c24xx_serial0_device); - serial_register(&s3c24xx_serial1_device); - serial_register(&s3c24xx_serial2_device); -} diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 9cabd99..121b4f2 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -3805,7 +3805,6 @@ CONFIG_S3C2410_NAND_BBT CONFIG_S3C2410_NAND_HWECC CONFIG_S3C2440 CONFIG_S3C24X0 -CONFIG_S3C24X0_SERIAL CONFIG_S3C24XX_CUSTOM_NAND_TIMING CONFIG_S3C24XX_TACLS CONFIG_S3C24XX_TWRPH0