@ -1,7 +1,7 @@
/*
* Configuation settings for the Renesas R7780MP board
*
* Copyright ( C ) 2007 Nobuhiro Iwamatsu < iwamatsu @ nigauri . org >
* Copyright ( C ) 2007 , 2008 Nobuhiro Iwamatsu < iwamatsu @ nigauri . org >
* Copyright ( C ) 2008 Yusuke Goda < goda . yusuke @ renesas . com >
*
* See file CREDITS for list of people who contributed to this
@ -31,7 +31,8 @@
# define CONFIG_SH4A 1
# define CONFIG_CPU_SH7780 1
# define CONFIG_R7780MP 1
# define __LITTLE_ENDIAN 1
# define CFG_R7780MP_OLD_FLASH 1
# define __LITTLE_ENDIAN__ 1
/*
* Command line configuration .
@ -59,12 +60,6 @@
/* check for keypress on bootdelay==0 */
/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
/* Network setting */
# define CONFIG_NETMASK 255.0.0.0
# define CONFIG_IPADDR 10.0.192.82
# define CONFIG_SERVERIP 10.0.0.1
# define CONFIG_GATEWAYIP 10.0.0.1
# define CFG_SDRAM_BASE (0x08000000)
# define CFG_SDRAM_SIZE (128 * 1024 * 1024)
@ -80,22 +75,30 @@
# define CFG_MEMTEST_START (CFG_SDRAM_BASE)
# define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
/* NOR Flash (S29PL127J60TFI130) */
/* Flash board support */
# define CFG_FLASH_BASE (0xA0000000)
# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
# define CFG_MAX_FLASH_BANKS (2)
# define CFG_MAX_FLASH_SECT 270
# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
# ifdef CFG_R7780MP_OLD_FLASH
/* NOR Flash (S29PL127J60TFI130) */
# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
# define CFG_MAX_FLASH_BANKS (2)
# define CFG_MAX_FLASH_SECT 270
# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\
CFG_FLASH_BASE + 0x100000 , \
CFG_FLASH_BASE + 0x400000 , \
CFG_FLASH_BASE + 0x700000 , }
# else /* CFG_R7780MP_OLD_FLASH */
/* NOR Flash (Spantion S29GL256P) */
# define CFG_MAX_FLASH_BANKS (1)
# define CFG_MAX_FLASH_SECT 256
# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
# endif /* CFG_R7780MP_OLD_FLASH */
# define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024)
/* Address of u-boot image in Flash */
# define CFG_MONITOR_BASE (CFG_FLASH_BASE)
# define CFG_MONITOR_LEN (112 * 1024)
# define CFG_MONITOR_LEN (256 * 1024)
/* Size of DRAM reserved for malloc() use */
# define CFG_MALLOC_LEN (256 * 1024)
# define CFG_MALLOC_LEN (1204 * 1024)
/* size in bytes reserved for initial data */
# define CFG_GBL_DATA_SIZE (256)
@ -110,7 +113,7 @@
# define CFG_FLASH_EMPTY_INFO
# define CFG_ENV_IS_IN_FLASH
# define CFG_ENV_SECT_SIZE (1 6 * 1024)
# define CFG_ENV_SECT_SIZE (25 6 * 1024)
# define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
# define CFG_FLASH_ERASE_TOUT 120000
@ -141,8 +144,10 @@
# endif /* CONFIG_CMD_PCI */
# if defined(CONFIG_CMD_NET)
/* #define CONFIG_NET_MULTI
# define CONFIG_RTL8169 * /
/*
# define CONFIG_NET_MULTI
# define CONFIG_RTL8169
*/
/* AX88696L Support(NE2000 base chip) */
# define CONFIG_DRIVER_NE2000
# define CONFIG_DRIVER_AX88796L