mkimage will now report information about loadable

Added FIT_LOADABLE_PROP, so the user can identify an optional entry
named "loadables" in their .its configuration. "loadables" is a comma
separated list in the .its

Documentation can be found in doc/uImage.FIT/source_file_format.txt and
                              doc/uImage.Fit/multi-with-loadables.its

Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common/image-fit.c

@@ -1436,6 +1436,7 @@ void fit_conf_print(const void *fit, int noffset, const char *p)
 	char *desc;
 	char *uname;
 	int ret;
+	int loadables_index;
 
 	/* Mandatory properties */
 	ret = fit_get_desc(fit, noffset, &desc);
@@ -1460,6 +1461,22 @@ void fit_conf_print(const void *fit, int noffset, const char *p)
 	uname = (char *)fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL);
 	if (uname)
 		printf("%s  FDT:          %s\n", p, uname);
+
+	/* Print out all of the specified loadables */
+	for (loadables_index = 0;
+	     !fdt_get_string_index(fit, noffset,
+			FIT_LOADABLE_PROP,
+			loadables_index,
+			(const char **)&uname) > 0;
+	     loadables_index++)
+	{
+		if (loadables_index == 0) {
+			printf("%s  Loadables:    ", p);
+		} else {
+			printf("%s                ", p);
+		}
+		printf("%s\n", uname);
+	}
 }
 
 static int fit_image_select(const void *fit, int rd_noffset, int verify)

doc/uImage.FIT/multi-with-loadables.its

@@ -0,0 +1,89 @@
+/*
+ * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
+ * This example makes use of the 'loadables' field
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Configuration to load a Xen Kernel";
+	#address-cells = <1>;
+
+	images {
+		xen_kernel@1 {
+			description = "xen binary";
+			data = /incbin/("./xen");
+			type = "kernel";
+			arch = "arm";
+			os = "linux";
+			compression = "none";
+			load = <0xa0000000>;
+			entry = <0xa0000000>;
+			hash@1 {
+				algo = "md5";
+			};
+		};
+
+		fdt@1 {
+			description = "xexpress-ca15 tree blob";
+			data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
+			type = "flat_dt";
+			arch = "arm";
+			compression = "none";
+			load = <0xb0000000>;
+			hash@1 {
+				algo = "md5";
+			};
+		};
+
+		fdt@2 {
+			description = "xexpress-ca15 tree blob";
+			data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
+			type = "flat_dt";
+			arch = "arm";
+			compression = "none";
+			load = <0xb0400000>;
+			hash@1 {
+				algo = "md5";
+			};
+		};
+
+		linux_kernel@1 {
+			description = "Linux Image";
+			data = /incbin/("./Image");
+			type = "kernel";
+			arch = "arm";
+			os = "linux";
+			compression = "none";
+			load = <0xa0000000>;
+			entry = <0xa0000000>;
+			hash@1 {
+				algo = "md5";
+			};
+		};
+	};
+
+	configurations {
+		default = "config@2";
+
+		config@1 {
+			description = "Just plain Linux";
+			kernel = "linux_kernel@1";
+			fdt = "fdt@1";
+		};
+
+		config@2 {
+			description = "Xen one loadable";
+			kernel = "xen_kernel@1";
+			fdt = "fdt@1";
+			loadables = "linux_kernel@1";
+		};
+
+		config@3 {
+			description = "Xen two loadables";
+			kernel = "xen_kernel@1";
+			fdt = "fdt@1";
+			loadables = "linux_kernel@1", "fdt@2";
+		};
+	};
+};

doc/uImage.FIT/source_file_format.txt

@@ -235,6 +235,7 @@ o config@1
   |- kernel = "kernel sub-node unit name"
   |- ramdisk = "ramdisk sub-node unit name"
   |- fdt = "fdt sub-node unit-name"
+  |- loadables = "loadables sub-node unit-name"
 
 
   Mandatory properties:
@@ -249,6 +250,9 @@ o config@1
     "fdt type").
   - setup : Unit name of the corresponding setup binary (used for booting
     an x86 kernel). This contains the setup.bin file built by the kernel.
+  - loadables : Unit name containing a list of additional binaries to be
+    loaded at their given locations.  "loadables" is a comma-separated list
+    of strings. U-Boot will load each binary at its given start-address.
 
 The FDT blob is required to properly boot FDT based kernel, so the minimal
 configuration for 2.6 FDT kernel is (kernel, fdt) pair.

include/image.h

@@ -742,6 +742,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end);
 #define FIT_KERNEL_PROP		"kernel"
 #define FIT_RAMDISK_PROP	"ramdisk"
 #define FIT_FDT_PROP		"fdt"
+#define FIT_LOADABLE_PROP	"loadables"
 #define FIT_DEFAULT_PROP	"default"
 #define FIT_SETUP_PROP		"setup"