fpga: Added Kconfig support for FPGA_SPARTAN3

This patch added Kconfig support for FPGA_SPARTAN3 and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
7 years ago · f415834608
parent d231182441
commit f415834608
9 changed files with 9 additions and 4 deletions
--- a/configs/apf27_defconfig
+++ b/configs/apf27_defconfig
@ -40,6 +40,7 @@ CONFIG_BOOTP_GATEWAY=y
 CONFIG_BOOTP_HOSTNAME=y
 CONFIG_BOOTP_SUBNETMASK=y
 CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_SPARTAN3=y
 CONFIG_MXC_GPIO=y
 CONFIG_MMC_MXC=y
 CONFIG_NAND=y
--- a/configs/astro_mcf5373l_defconfig
+++ b/configs/astro_mcf5373l_defconfig
@ -19,4 +19,5 @@ CONFIG_CMD_JFFS2=y
 CONFIG_FPGA_ALTERA=y
 CONFIG_FPGA_CYCLON2=y
 CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_SPARTAN3=y
 CONFIG_MTD_NOR_FLASH=y
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@ -32,6 +32,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTP_DNS=y
 CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_SPARTAN3=y
 CONFIG_SYS_OMAP24_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
--- a/configs/x600_defconfig
+++ b/configs/x600_defconfig
@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8
 CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_SPARTAN3=y
 CONFIG_SYS_I2C_DW=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@ -45,4 +45,9 @@ config FPGA_ZYNQMPPL
 	  Enable FPGA driver for loading bitstream in BIT and BIN format
 	  on Xilinx Zynq UltraScale+ (ZynqMP) device.

+config FPGA_SPARTAN3
+       bool "Enable Spartan3 FPGA driver"
+       help
+         Enable Spartan3 FPGA driver for loading in BIT format.
+
 endmenu
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@ -200,7 +200,6 @@
 * FPGA
 */
 #define CONFIG_FPGA_COUNT		1
-#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_SYS_FPGA_WAIT		250 /* 250 ms */
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_SYS_FPGA_CHECK_CTRLC
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@ -171,7 +171,6 @@
 #define CONFIG_SYS_LOAD_ADDR	0x20000

 #define CONFIG_FPGA_COUNT	1
-#define	CONFIG_FPGA_SPARTAN3
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_SYS_FPGA_WAIT		1000

--- a/include/configs/mt_ventoux.h
+++ b/include/configs/mt_ventoux.h
@ -32,7 +32,6 @@
 /*
 * FPGA
 */
-#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_SYS_FPGA_WAIT	10000
 #define CONFIG_MAX_FPGA_DEVICES	1
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@ -85,7 +85,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68

 /* FPGA config options */
-#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_FPGA_COUNT	1

 /* USB EHCI options */