From f8f8acd7249d224ed5f9704a5738c469b137bc8e Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 6 Jul 2010 19:32:09 +0200 Subject: [PATCH] MX51: Support for TTECH vision2 board The patch adds support for TTECH vision2 board. The board has 512MB RAM, SDHC slot and 4MB SPI device from StMicron. Signed-off-by: Stefano Babic --- MAINTAINERS | 1 + board/ttcontrol/vision2/Makefile | 48 ++ board/ttcontrol/vision2/config.mk | 25 + board/ttcontrol/vision2/imximage_hynix.cfg | 209 +++++++++ board/ttcontrol/vision2/vision2.c | 711 +++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/vision2.h | 214 +++++++++ include/mc13892.h | 3 + 8 files changed, 1212 insertions(+) create mode 100644 board/ttcontrol/vision2/Makefile create mode 100644 board/ttcontrol/vision2/config.mk create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg create mode 100644 board/ttcontrol/vision2/vision2.c create mode 100644 include/configs/vision2.h diff --git a/MAINTAINERS b/MAINTAINERS index 2cf29dd..b348559 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -547,6 +547,7 @@ Stefano Babic polaris xscale trizepsiv xscale mx51evk i.MX51 + vision2 i.MX51 Dirk Behme diff --git a/board/ttcontrol/vision2/Makefile b/board/ttcontrol/vision2/Makefile new file mode 100644 index 0000000..309e3a3 --- /dev/null +++ b/board/ttcontrol/vision2/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := vision2.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ttcontrol/vision2/config.mk b/board/ttcontrol/vision2/config.mk new file mode 100644 index 0000000..59f3367 --- /dev/null +++ b/board/ttcontrol/vision2/config.mk @@ -0,0 +1,25 @@ +# +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds +TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage_hynix.cfg diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg new file mode 100644 index 0000000..ed531db --- /dev/null +++ b/board/ttcontrol/vision2/imximage_hynix.cfg @@ -0,0 +1,209 @@ +# +# (C) Copyright 2009 +# Stefano Babic DENX Software Engineering sbabic@denx.de. +# +# (C) Copyright 2010 +# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer docs/README.imxmage for more details about how-to configure +# and create imximage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# Boot Device : one of +# spi, nand, onenand, sd + +BOOT_FROM spi + +# Device Configuration Data (DCD) +# +# Each entry must have the format: +# Addr-type Address Value +# +# where: +# Addr-type register length (1,2 or 4 bytes) +# Address absolute address of the register +# value value to be stored in the register + +####################### +### Disable WDOG ### +####################### +DATA 2 0x73f98000 0x30 + +####################### +### SET DDR Clk ### +####################### + +# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) +DATA 4 0x73FD4018 0x000024C0 + +# DOUBLE SPI CLK (13MHz->26 MHz Clock) +DATA 4 0x73FD4038 0x2010241 + +#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST +DATA 4 0x73fa8600 0x00000107 +#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST +DATA 4 0x73fa8604 0x00000107 +#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +DATA 4 0x73fa8608 0x00000187 +#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +DATA 4 0x73fa860c 0x00000187 +#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST +DATA 4 0x73fa8614 0x00000107 +#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) +DATA 4 0x73fa86a8 0x00000187 + +####################### +### Settings IOMUXC ### +####################### + +# DDR IOMUX configuration +# Control, Data, Address pads are in their default state: HIGH DS, FAST SR. +# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS +DATA 4 0x73fa84b8 0x000000e7 +# PVTC MAX (at GPC, PGR reg) +#DATA 4 0x73FD8004 0x1fc00000 + +#DQM0 DS high slew rate slow +DATA 4 0x73fa84d4 0x000000e4 +#DQM1 DS high slew rate slow +DATA 4 0x73fa84d8 0x000000e4 +#DQM2 DS high slew rate slow +DATA 4 0x73fa84dc 0x000000e4 +#DQM3 DS high slew rate slow +DATA 4 0x73fa84e0 0x000000e4 + +#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow +DATA 4 0x73fa84bc 0x000000c4 +#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow +DATA 4 0x73fa84c0 0x000000c4 +#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow +DATA 4 0x73fa84c4 0x000000c4 +#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow +DATA 4 0x73fa84c8 0x000000c4 + +#DRAM_DATA B0 +DATA 4 0x73fa88a4 0x00000004 +#DRAM_DATA B1 +DATA 4 0x73fa88ac 0x00000004 +#DRAM_DATA B2 +DATA 4 0x73fa88b8 0x00000004 +#DRAM_DATA B3 +DATA 4 0x73fa882c 0x00000004 + +#DRAM_DATA B0 slew rate +DATA 4 0x73fa8878 0x00000000 +#DRAM_DATA B1 slew rate +DATA 4 0x73fa8880 0x00000000 +#DRAM_DATA B2 slew rate +DATA 4 0x73fa888c 0x00000000 +#DRAM_DATA B3 slew rate +DATA 4 0x73fa889c 0x00000000 + +####################### +### Configure SDRAM ### +####################### + +# Configure CS0 +####################### + +# ESDCTL0: Enable controller +DATA 4 0x83fd9000 0x83220000 + +# Init DRAM on CS0 +# ESDSCR: Precharge command +DATA 4 0x83fd9014 0x04008008 +# ESDSCR: Refresh command +DATA 4 0x83fd9014 0x00008010 +# ESDSCR: Refresh command +DATA 4 0x83fd9014 0x00008010 +# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +DATA 4 0x83fd9014 0x00338018 +# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +DATA 4 0x83fd9014 0x0020801a +# ESDSCR +DATA 4 0x83fd9014 0x00008000 + +# ESDSCR: EMR with full Drive strength +#DATA 4 0x83fd9014 0x0000801a + +# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 +DATA 4 0x83fd9000 0xC3220000 + +# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks +# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks +#DATA 4 0x83fd9004 0xC33574AA + +#micron mDDR +# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks +# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +#DATA 4 0x83FD9004 0x101564a8 + +#hynix mDDR +# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks +# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +DATA 4 0x83FD9004 0x704564a8 + +# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 +DATA 4 0x83fd9010 0x000a1700 + +# Configure CS1 +####################### + +# ESDCTL1: Enable controller +DATA 4 0x83fd9008 0x83220000 + +# Init DRAM on CS1 +# ESDSCR: Precharge command +DATA 4 0x83fd9014 0x0400800c +# ESDSCR: Refresh command +DATA 4 0x83fd9014 0x00008014 +# ESDSCR: Refresh command +DATA 4 0x83fd9014 0x00008014 +# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +DATA 4 0x83fd9014 0x0033801c +# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +DATA 4 0x83fd9014 0x0020801e +# ESDSCR +DATA 4 0x83fd9014 0x00008004 + +# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 +DATA 4 0x83fd9008 0xC3220000 + +# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks +# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks +#DATA 4 0x83fd900c 0xC33574AA + +#micron mDDR +# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks +# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +#DATA 4 0x83FD900C 0x101564a8 + +#hynix mDDR +# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks +# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +DATA 4 0x83FD900C 0x704564a8 + +# ESDSCR (mDRAM configuration finished) +DATA 4 0x83FD9014 0x00000004 + +# ESDSCR - clear "configuration request" bit +DATA 4 0x83fd9014 0x00000000 diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c new file mode 100644 index 0000000..c991ee2 --- /dev/null +++ b/board/ttcontrol/vision2/vision2.c @@ -0,0 +1,711 @@ +/* + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; + +#ifdef CONFIG_HW_WATCHDOG +#include + +void hw_watchdog_reset(void) +{ + int val; + + /* toggle watchdog trigger pin */ + val = mxc_gpio_get(66); + val = val ? 0 : 1; + mxc_gpio_set(66, val); +} +#endif + +static void init_drive_strength(void) +{ + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS, + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS, + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM); + + /* Setting pad options */ + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); +} + +u32 get_board_rev(void) +{ + system_rev = get_cpu_rev(); + + return system_rev; +} + +int dram_init(void) +{ +#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); +#if (CONFIG_NR_DRAM_BANKS > 1) + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, + PHYS_SDRAM_2_SIZE); +#endif +#else + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); +#endif + + return 0; +} + +static void setup_weim(void) +{ + struct weim *pweim = (struct weim *)WEIM_BASE_ADDR; + + pweim->csgcr1 = 0x004100b9; + pweim->csgcr2 = 0x00000001; + pweim->csrcr1 = 0x0a018000; + pweim->csrcr2 = 0; + pweim->cswcr1 = 0x0704a240; +} + +static void setup_uart(void) +{ + unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST; + /* console RX on Pin EIM_D25 */ + mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad); + /* console TX on Pin EIM_D26 */ + mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad); +} + +#ifdef CONFIG_MXC_SPI +void spi_io_init(void) +{ + /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ + mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* + * SS1 will be used as GPIO because of uninterrupted + * long SPI transmissions (GPIO4_25) + */ + mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7); + mxc_iomux_set_pad(MX51_PIN_DI1_PIN11, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); +} + +static void reset_peripherals(int reset) +{ + if (reset) { + + /* reset_n is on NANDF_D15 */ + mxc_gpio_set(89, 0); + mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT); + +#ifdef CONFIG_VISION2_HW_1_0 + /* + * set FEC Configuration lines + * set levels of FEC config lines + */ + mxc_gpio_set(75, 0); + mxc_gpio_set(74, 1); + mxc_gpio_set(95, 1); + mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT); + + /* set direction of FEC config lines */ + mxc_gpio_set(59, 0); + mxc_gpio_set(60, 0); + mxc_gpio_set(61, 0); + mxc_gpio_set(55, 1); + mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT); + + /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */ + mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); + /* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */ + mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1); + /* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */ + mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1); + /* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */ + mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1); + /* FEC_COL - sel GPIO (3-10) for configuration -> 1 */ + mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3); + /* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */ + mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3); + /* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */ + mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3); +#endif + + /* + * activate reset_n pin + * Select mux mode: ALT3 mux port: NAND D15 + */ + mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_NANDF_D15, + PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX); + } else { + /* set FEC Control lines */ + mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN); + udelay(500); + +#ifdef CONFIG_VISION2_HW_1_0 + /* FEC RDATA[3] */ + mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); + + /* FEC RDATA[2] */ + mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); + + /* FEC RDATA[1] */ + mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); + + /* FEC RDATA[0] */ + mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); + + /* FEC RX_CLK */ + mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); + + /* FEC RX_ER */ + mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); + + /* FEC COL */ + mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); +#endif + } +} + +static void power_init_mx51(void) +{ + unsigned int val; + + /* Write needed to Power Gate 2 register */ + val = pmic_reg_read(REG_POWER_MISC); + + /* enable VCAM with 2.775V to enable read from PMIC */ + val = VCAMCONFIG | VCAMEN; + pmic_reg_write(REG_MODE_1, val); + + /* + * Set switchers in Auto in NORMAL mode & STANDBY mode + * Setup the switcher mode for SW1 & SW2 + */ + val = pmic_reg_read(REG_SW_4); + val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | + (SWMODE_MASK << SWMODE2_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); + pmic_reg_write(REG_SW_4, val); + + /* Setup the switcher mode for SW3 & SW4 */ + val = pmic_reg_read(REG_SW_5); + val &= ~((SWMODE_MASK << SWMODE4_SHIFT) | + (SWMODE_MASK << SWMODE3_SHIFT)); + val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE3_SHIFT); + pmic_reg_write(REG_SW_5, val); + + + /* Set VGEN3 to 1.8V, VCAM to 3.0V */ + val = pmic_reg_read(REG_SETTING_0); + val &= ~(VCAM_MASK | VGEN3_MASK); + val |= VCAM_3_0; + pmic_reg_write(REG_SETTING_0, val); + + /* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */ + val = pmic_reg_read(REG_SETTING_1); + val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); + val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8; + pmic_reg_write(REG_SETTING_1, val); + + /* Configure VGEN3 and VCAM regulators to use external PNP */ + val = VGEN3CONFIG | VCAMCONFIG; + pmic_reg_write(REG_MODE_1, val); + udelay(200); + + /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ + val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | + VVIDEOEN | VAUDIOEN | VSDEN; + pmic_reg_write(REG_MODE_1, val); + + val = pmic_reg_read(REG_POWER_CTL2); + val |= WDIRESET; + pmic_reg_write(REG_POWER_CTL2, val); + + udelay(2500); + +} +#endif + +static void setup_gpios(void) +{ + unsigned int i; + + /* CAM_SUP_DISn, GPIO1_7 */ + mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82); + + /* DAB Display EN, GPIO3_1 */ + mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82); + + /* WDOG_TRIGGER, GPIO3_2 */ + mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82); + + /* Now we need to trigger the watchdog */ + WATCHDOG_RESET(); + + /* Display2 TxEN, GPIO3_3 */ + mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82); + + /* DAB Light EN, GPIO3_4 */ + mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82); + + /* AUDIO_MUTE, GPIO3_5 */ + mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82); + + /* SPARE_OUT, GPIO3_6 */ + mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4); + mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82); + + /* BEEPER_EN, GPIO3_26 */ + mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82); + + /* POWER_OFF, GPIO3_27 */ + mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82); + + /* FRAM_WE, GPIO3_30 */ + mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82); + + /* EXPANSION_EN, GPIO4_26 */ + mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82); + + /* + * Set GPIO1_4 to high and output; it is used to reset + * the system on reboot + */ + mxc_gpio_set(4, 1); + mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT); + + mxc_gpio_set(7, 0); + mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT); + for (i = 65; i < 71; i++) { + mxc_gpio_set(i, 0); + mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT); + } + + mxc_gpio_set(94, 0); + mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT); + + /* Set POWER_OFF high */ + mxc_gpio_set(91, 1); + mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT); + + mxc_gpio_set(90, 0); + mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT); + + mxc_gpio_set(122, 0); + mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT); + + mxc_gpio_set(121, 1); + mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT); + + WATCHDOG_RESET(); +} + +static void setup_fec(void) +{ + /*FEC_MDIO*/ + mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD); + + /*FEC_MDC*/ + mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); + + /* FEC RDATA[3] */ + mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); + + /* FEC RDATA[2] */ + mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); + + /* FEC RDATA[1] */ + mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); + + /* FEC RDATA[0] */ + mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); + + /* FEC TDATA[3] */ + mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); + + /* FEC TDATA[2] */ + mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); + + /* FEC TDATA[1] */ + mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); + + /* FEC TDATA[0] */ + mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); + + /* FEC TX_EN */ + mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); + + /* FEC TX_ER */ + mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); + + /* FEC TX_CLK */ + mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); + + /* FEC TX_COL */ + mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); + + /* FEC RX_CLK */ + mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); + + /* FEC RX_CRS */ + mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); + + /* FEC RX_ER */ + mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); + mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); + + /* FEC RX_DV */ + mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); +} + +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {MMC_SDHC1_BASE_ADDR, 1}, +}; + +int get_mmc_getcd(u8 *cd, struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) + *cd = mxc_gpio_get(0); + else + *cd = 0; + + return 0; +} + +#ifdef CONFIG_FSL_ESDHC +int board_mmc_init(bd_t *bis) +{ + mxc_request_iomux(MX51_PIN_SD1_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA0, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA1, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA2, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_request_iomux(MX51_PIN_SD1_DATA3, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CMD, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_CLK, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, + PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | + PAD_CTL_PUE_PULL | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_GPIO1_0, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_0, + PAD_CTL_HYS_ENABLE); + mxc_request_iomux(MX51_PIN_GPIO1_1, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_1, + PAD_CTL_HYS_ENABLE); + + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} +#endif + +int board_early_init_f(void) +{ + + + init_drive_strength(); + + /* Setup debug led */ + mxc_gpio_set(6, 0); + mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT); + mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + /* wait a little while to give the pll time to settle */ + sdelay(100000); + + setup_weim(); + setup_uart(); + setup_fec(); + setup_gpios(); + + spi_io_init(); + + return 0; +} + +int board_init(void) +{ +#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC + board_early_init_f(); +#endif + gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int board_late_init(void) +{ + power_init_mx51(); + + reset_peripherals(1); + udelay(2000); + reset_peripherals(0); + udelay(2000); + + /* Early revisions require a second reset */ +#ifdef CONFIG_VISION2_HW_1_0 + reset_peripherals(1); + udelay(2000); + reset_peripherals(0); + udelay(2000); +#endif + + return 0; +} + +int checkboard(void) +{ + u32 system_rev = get_cpu_rev(); + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + puts("Board: TTControl Vision II CPU V"); + + switch (system_rev & 0xff) { + case CHIP_REV_3_0: + puts("3.0 ["); + break; + case CHIP_REV_2_5: + puts("2.5 ["); + break; + case CHIP_REV_2_0: + puts("2.0 ["); + break; + case CHIP_REV_1_1: + puts("1.1 ["); + break; + case CHIP_REV_1_0: + default: + puts("1.0 ["); + break; + } + + cause = src_regs->srsr; + switch (cause) { + case 0x0001: + puts("POR"); + break; + case 0x0009: + puts("RST"); + break; + case 0x0010: + case 0x0011: + puts("WDOG"); + break; + default: + printf("unknown 0x%x", cause); + } + puts("]\n"); + + return 0; +} + diff --git a/boards.cfg b/boards.cfg index 02eb153..88c4060 100644 --- a/boards.cfg +++ b/boards.cfg @@ -47,6 +47,7 @@ jadecpu arm arm926ejs jadecpu syteco mb86r0x suen3 arm arm926ejs km_arm keymile kirkwood rd6281a arm arm926ejs - Marvell kirkwood mx51evk arm armv7 mx51evk freescale mx51 +vision2 arm armv7 vision2 ttcontrol mx51 actux1 arm ixp actux2 arm ixp actux3 arm ixp diff --git a/include/configs/vision2.h b/include/configs/vision2.h new file mode 100644 index 0000000..44a6f8b --- /dev/null +++ b/include/configs/vision2.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51-3Stack Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + +#define CONFIG_MX51 /* in a mx51 */ +#define CONFIG_L2_OFF + +#define CONFIG_MX51_HCLK_FREQ 24000000 +#define CONFIG_MX51_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define BOARD_LATE_INIT + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (2048 * 1024) + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX51_UART3 +#define CONFIG_MXC_GPIO +#define CONFIG_MXC_SPI +#define CONFIG_HW_WATCHDOG + + /* + * SPI Configs + * */ +#define CONFIG_FSL_SF +#define CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +/* + * Use gpio 4 pin 25 as chip select for SPI flash + * This corresponds to gpio 121 + */ +#define CONFIG_SPI_FLASH_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 25000000 + +#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 + +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) +#define CONFIG_ENV_SIZE (4 * 1024) + +#define CONFIG_FSL_ENV_IN_SF +#define CONFIG_ENV_IS_IN_SPI_FLASH + +/* PMIC Controller */ +#define CONFIG_FSL_PMIC +#define CONFIG_FSL_PMIC_BUS 0 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 2500000 +#define CONFIG_FSL_PMIC_MODE SPI_MODE_0 +#define CONFIG_RTC_MC13783 + +/* + * MMC Configs + */ +#define CONFIG_FSL_ESDHC +#ifdef CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000) +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +#define CONFIG_MMC + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_CMD_DATE + +/* + * Eth Configs + */ +#define CONFIG_HAS_ETH1 +#define CONFIG_NET_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 3 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include + +#define CONFIG_CMD_SPI +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x90800000\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "Vision II U-boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x90000000 +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "Vision II U-boot > " + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_BASE 0x90000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000 + +#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC +#define CONFIG_SYS_INIT_RAM_END (64 * 1024) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) +#undef CONFIG_SKIP_RELOCATE_UBOOT +#else +#define CONFIG_SKIP_RELOCATE_UBOOT +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + 0x2000) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F + +/* 166 MHz DDR RAM */ +#define CONFIG_SYS_DDR_CLKSEL 0 +#define CONFIG_SYS_CLKTL_CBCDR 0x19239100 + +#define CONFIG_SYS_NO_FLASH + +#endif /* __CONFIG_H */ diff --git a/include/mc13892.h b/include/mc13892.h index b291757..791e3ec 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -157,4 +157,7 @@ #define VSDSTBY (1 << 19) #define VSDMODE (1 << 20) +/* Reg Power Control 2*/ +#define WDIRESET (1 << 12) + #endif