Convert CONFIG_CMD_REGINFO to Kconfig

This patch converts CONFIG_CMD_REGINFO to Kconfig

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
master
Christophe Leroy 7 years ago committed by Tom Rini
parent b75dfd2d46
commit fa379223cd
  1. 1
      README
  2. 2
      arch/powerpc/Kconfig
  3. 26
      arch/powerpc/cpu/mpc85xx/Kconfig
  4. 6
      cmd/Kconfig
  5. 1
      configs/MPC8541CDS_defconfig
  6. 1
      configs/MPC8541CDS_legacy_defconfig
  7. 1
      configs/MPC8544DS_defconfig
  8. 1
      configs/MPC8555CDS_defconfig
  9. 1
      configs/MPC8555CDS_legacy_defconfig
  10. 1
      configs/MPC8568MDS_defconfig
  11. 1
      configs/MPC8569MDS_ATM_defconfig
  12. 1
      configs/MPC8569MDS_defconfig
  13. 1
      configs/MPC8572DS_36BIT_defconfig
  14. 1
      configs/MPC8572DS_defconfig
  15. 1
      configs/P1022DS_36BIT_NAND_defconfig
  16. 1
      configs/P1022DS_36BIT_SDCARD_defconfig
  17. 1
      configs/P1022DS_36BIT_SPIFLASH_defconfig
  18. 1
      configs/P1022DS_36BIT_defconfig
  19. 1
      configs/P1022DS_NAND_defconfig
  20. 1
      configs/P1022DS_SDCARD_defconfig
  21. 1
      configs/P1022DS_SPIFLASH_defconfig
  22. 1
      configs/P1022DS_defconfig
  23. 1
      configs/P1023RDB_defconfig
  24. 1
      configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig
  25. 1
      configs/controlcenterd_36BIT_SDCARD_defconfig
  26. 1
      configs/qemu-ppce500_defconfig
  27. 1
      configs/socrates_defconfig
  28. 1
      configs/xpedite537x_defconfig
  29. 1
      include/config_cmd_all.h
  30. 5
      include/configs/B4860QDS.h
  31. 5
      include/configs/BSC9131RDB.h
  32. 5
      include/configs/BSC9132QDS.h
  33. 5
      include/configs/C29XPCIE.h
  34. 3
      include/configs/MCR3000.h
  35. 5
      include/configs/MPC8536DS.h
  36. 5
      include/configs/MPC8541CDS.h
  37. 5
      include/configs/MPC8544DS.h
  38. 5
      include/configs/MPC8548CDS.h
  39. 5
      include/configs/MPC8555CDS.h
  40. 8
      include/configs/MPC8560ADS.h
  41. 5
      include/configs/MPC8568MDS.h
  42. 5
      include/configs/MPC8569MDS.h
  43. 5
      include/configs/MPC8572DS.h
  44. 2
      include/configs/MPC8610HPCD.h
  45. 5
      include/configs/MPC8641HPCN.h
  46. 5
      include/configs/P1010RDB.h
  47. 5
      include/configs/P1022DS.h
  48. 5
      include/configs/P1023RDB.h
  49. 5
      include/configs/T102xQDS.h
  50. 5
      include/configs/T102xRDB.h
  51. 5
      include/configs/T1040QDS.h
  52. 5
      include/configs/T104xRDB.h
  53. 5
      include/configs/T208xQDS.h
  54. 5
      include/configs/T208xRDB.h
  55. 2
      include/configs/T4240RDB.h
  56. 5
      include/configs/TQM834x.h
  57. 5
      include/configs/UCP1020.h
  58. 3
      include/configs/controlcenterd.h
  59. 5
      include/configs/corenet_ds.h
  60. 5
      include/configs/cyrus.h
  61. 5
      include/configs/p1_p2_rdb_pc.h
  62. 5
      include/configs/p1_twr.h
  63. 2
      include/configs/qemu-ppce500.h
  64. 5
      include/configs/sbc8548.h
  65. 2
      include/configs/sbc8641d.h
  66. 3
      include/configs/smdkc100.h
  67. 1
      include/configs/socrates.h
  68. 2
      include/configs/t4qds.h
  69. 5
      include/configs/xpedite517x.h
  70. 5
      include/configs/xpedite520x.h
  71. 5
      include/configs/xpedite537x.h
  72. 5
      include/configs/xpedite550x.h
  73. 1
      scripts/config_whitelist.txt

@ -814,7 +814,6 @@ The following options need to be configured:
CONFIG_CMD_NFS NFS support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
CONFIG_CMD_REGINFO * Register dump
CONFIG_CMD_RUN run command in env variable
CONFIG_CMD_SANDBOX * sb command to access sandbox features
CONFIG_CMD_SAVES * save S record dump

@ -29,9 +29,11 @@ config MPC86xx
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
imply ENV_IS_IN_FLASH
imply CMD_REGINFO
config 8xx
bool "MPC8xx"
imply CMD_REGINFO
endchoice

@ -427,6 +427,7 @@ config ARCH_B4420
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
imply CMD_REGINFO
config ARCH_B4860
bool
@ -454,6 +455,7 @@ config ARCH_B4860
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
imply CMD_REGINFO
config ARCH_BSC9131
bool
@ -469,6 +471,7 @@ config ARCH_BSC9131
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
imply CMD_REGINFO
config ARCH_BSC9132
bool
@ -490,6 +493,7 @@ config ARCH_BSC9132
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_PCI
imply CMD_REGINFO
config ARCH_C29X
bool
@ -505,6 +509,7 @@ config ARCH_C29X
select FSL_IFC
imply CMD_NAND
imply CMD_PCI
imply CMD_REGINFO
config ARCH_MPC8536
bool
@ -520,6 +525,7 @@ config ARCH_MPC8536
select FSL_ELBC
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
config ARCH_MPC8540
bool
@ -560,6 +566,7 @@ config ARCH_MPC8548
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
imply ENV_IS_IN_FLASH
imply CMD_REGINFO
config ARCH_MPC8555
bool
@ -636,6 +643,7 @@ config ARCH_P1010
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
imply CMD_REGINFO
config ARCH_P1011
bool
@ -667,6 +675,7 @@ config ARCH_P1020
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
imply CMD_REGINFO
config ARCH_P1021
bool
@ -681,8 +690,10 @@ config ARCH_P1021
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
imply CMD_REGINFO
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
config ARCH_P1022
bool
@ -729,6 +740,7 @@ config ARCH_P1024
imply CMD_NAND
imply CMD_SATA
imply CMD_PCI
imply CMD_REGINFO
config ARCH_P1025
bool
@ -744,6 +756,7 @@ config ARCH_P1025
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
config ARCH_P2020
bool
@ -761,6 +774,7 @@ config ARCH_P2020
select FSL_ELBC
imply CMD_EEPROM
imply CMD_NAND
imply CMD_REGINFO
config ARCH_P2041
bool
@ -810,6 +824,7 @@ config ARCH_P3041
select FSL_ELBC
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
config ARCH_P4080
bool
@ -846,6 +861,7 @@ config ARCH_P4080
select SYS_FSL_SEC_COMPAT_4
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
config ARCH_P5020
bool
@ -868,6 +884,7 @@ config ARCH_P5020
select SYS_PPC64
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
config ARCH_P5040
bool
@ -890,6 +907,7 @@ config ARCH_P5040
select SYS_PPC64
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
config ARCH_QEMU_E500
bool
@ -912,6 +930,7 @@ config ARCH_T1023
select FSL_IFC
imply CMD_EEPROM
imply CMD_NAND
imply CMD_REGINFO
config ARCH_T1024
bool
@ -932,6 +951,7 @@ config ARCH_T1024
imply CMD_EEPROM
imply CMD_NAND
imply CMD_MTDPARTS
imply CMD_REGINFO
config ARCH_T1040
bool
@ -953,6 +973,7 @@ config ARCH_T1040
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
config ARCH_T1042
bool
@ -974,6 +995,7 @@ config ARCH_T1042
imply CMD_MTDPARTS
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
config ARCH_T2080
bool
@ -998,6 +1020,7 @@ config ARCH_T2080
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
config ARCH_T2081
bool
@ -1019,6 +1042,7 @@ config ARCH_T2081
select SYS_PPC64
select FSL_IFC
imply CMD_NAND
imply CMD_REGINFO
config ARCH_T4160
bool
@ -1042,6 +1066,7 @@ config ARCH_T4160
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
config ARCH_T4240
bool
@ -1068,6 +1093,7 @@ config ARCH_T4240
select FSL_IFC
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
config BOOKE
bool

@ -158,6 +158,12 @@ config CMD_LICENSE
help
Print GPL license text
config CMD_REGINFO
bool "reginfo"
depends on PPC
help
Register dump
endmenu
menu "Boot commands"

@ -7,6 +7,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y

@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y

@ -9,6 +9,7 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y

@ -7,6 +7,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y

@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_MII=y

@ -8,6 +8,7 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y

@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y

@ -9,6 +9,7 @@ CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y

@ -10,6 +10,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y

@ -9,6 +9,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y

@ -21,6 +21,7 @@ CONFIG_TPL_ENV_SUPPORT=y
CONFIG_TPL_I2C_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -19,6 +19,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -20,6 +20,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -10,6 +10,7 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -21,6 +21,7 @@ CONFIG_TPL_I2C_SUPPORT=y
CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_TPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -18,6 +18,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -19,6 +19,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -9,6 +9,7 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y

@ -10,6 +10,7 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=-1
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
# CONFIG_CMD_EEPROM is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_I2C=y

@ -16,6 +16,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set

@ -16,6 +16,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set

@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_GREPENV=y

@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_NAND=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y

@ -8,6 +8,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_CMD_REGINFO=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_I2C=y

@ -13,7 +13,6 @@
* Alphabetical list of all possible commands.
*/
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */

@ -690,11 +690,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -285,11 +285,6 @@ extern unsigned long get_sdram_size(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -508,11 +508,6 @@ combinations. this should be removed later
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -426,11 +426,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -151,7 +151,4 @@
#define BOOTFLAG_COLD 0x01
#define BOOTFLAG_WARM 0x02
/* Misc Settings */
#define CONFIG_CMD_REGINFO
#endif /* __CONFIG_H */

@ -578,11 +578,6 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifdef CONFIG_MMC

@ -338,11 +338,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -343,11 +343,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/

@ -456,11 +456,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -336,11 +336,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -349,14 +349,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#if defined(CONFIG_ETHER_ON_FCC)
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -351,11 +351,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -443,11 +443,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
#ifdef CONFIG_MMC

@ -541,11 +541,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/

@ -262,8 +262,6 @@
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_CMD_REGINFO
#define CONFIG_ULI526X
#ifdef CONFIG_ULI526X
#endif

@ -582,11 +582,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -709,11 +709,6 @@ extern unsigned long get_sdram_size(void);
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \

@ -581,11 +581,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -237,11 +237,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -768,11 +768,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -779,11 +779,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -647,11 +647,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -762,11 +762,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -733,11 +733,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -679,11 +679,6 @@ unsigned long get_board_ddr_clk(void);
*/
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -56,8 +56,6 @@
#define CONFIG_DDR_ECC
#define CONFIG_CMD_REGINFO
/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */

@ -213,11 +213,6 @@
#endif /* CONFIG_TSEC_ENET */
/*
* General PCI
* Addresses are mapped 1-1.
*/
#if defined(CONFIG_PCI)
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */

@ -411,11 +411,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -333,9 +333,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#ifndef CONFIG_TRAILBLAZER
#define CONFIG_CMD_REGINFO
/*
* Board initialisation callbacks
*/

@ -580,11 +580,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -404,11 +404,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -797,11 +797,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -373,11 +373,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* USB
*/
#define CONFIG_HAS_FSL_DR_USB

@ -10,8 +10,6 @@
#ifndef __QEMU_PPCE500_H
#define __QEMU_PPCE500_H
#define CONFIG_CMD_REGINFO
#undef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */

@ -506,11 +506,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -450,8 +450,6 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*

@ -56,9 +56,6 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/***********************************************************
* Command definition
***********************************************************/
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

@ -277,7 +277,6 @@
* Command line configuration.
*/
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_REGINFO
#undef CONFIG_WATCHDOG /* watchdog disabled */

@ -10,8 +10,6 @@
#ifndef __T4QDS_H
#define __T4QDS_H
#define CONFIG_CMD_REGINFO
/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */

@ -481,11 +481,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U
/*
* Command configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -284,11 +284,6 @@
#define CONFIG_BOOTP_GATEWAY
/*
* Command configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -334,11 +334,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_HAS_ETH1
/*
* Command configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -333,11 +333,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
/*
* Command configuration.
*/
#define CONFIG_CMD_REGINFO
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */

@ -293,7 +293,6 @@ CONFIG_CM922T_XA10
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
CONFIG_CMD_REGINFO
CONFIG_CMD_REISER
CONFIG_CMD_SANDBOX
CONFIG_CMD_SAVES

Loading…
Cancel
Save