From fcb185244b700a7289e5c30d075fccf81099a253 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 13 Mar 2017 15:04:30 +0200 Subject: [PATCH] board: ti: am57xx-idk: Auto detect LCD Panel AM571x IDK and AM572x IDK have optional LCD Kits that can be purchased. These can be one of OSD101T2045 or the newer OSD101T2587. The LCD panel itself has no registers that can be used to identify the panel, however, the touchscreen controllers on the panels are different. Hence to ease user experience, we can use the touch screen controller's ID information to detect what kind of panel we use and select the appropriate kernel dtb for the platform configuration. NOTE: AM572x IDK default configuration is for LCD Connectivity, however the AM571x IDK has a jumper (J51) that needs to be mounted for the IDK to operate with LCD (Vs two PRUSS ethernet port option). Touchscreen ID information is documented in: http://www.osddisplays.com/TI/OSD101T2587-53TS_A.1.pdf Acked-by: Lokesh Vutla Signed-off-by: Nishanth Menon Signed-off-by: Lokesh Vutla Signed-off-by: Roger Quadros Reviewed-by: Tom Rini --- board/ti/am57xx/board.c | 78 ++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 70 insertions(+), 8 deletions(-) diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 1dcc8a3..1cfc08b 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -54,6 +54,19 @@ DECLARE_GLOBAL_DATA_PTR; /* GPIO 7_11 */ #define GPIO_DDR_VTT_EN 203 +/* Touch screen controller to identify the LCD */ +#define OSD_TS_FT_BUS_ADDRESS 0 +#define OSD_TS_FT_CHIP_ADDRESS 0x38 +#define OSD_TS_FT_REG_ID 0xA3 +/* + * Touchscreen IDs for various OSD panels + * Ref: http://www.osddisplays.com/TI/OSD101T2587-53TS_A.1.pdf + */ +/* Used on newer osd101t2587 Panels */ +#define OSD_TS_FT_ID_5x46 0x54 +/* Used on older osd101t2045 Panels */ +#define OSD_TS_FT_ID_5606 0x08 + #define SYSINFO_BOARD_NAME_MAX_LEN 45 #define TPS65903X_PRIMARY_SECONDARY_PAD2 0xFB @@ -473,10 +486,64 @@ int board_init(void) return 0; } -int board_late_init(void) +void am57x_idk_lcd_detect(void) { - char *idk_lcd; + int r = -ENODEV; + char *idk_lcd = "no"; + uint8_t buf = 0; + + /* Only valid for IDKs */ + if (board_is_x15() || board_is_am572x_evm()) + return; + + /* Only AM571x IDK has gpio control detect.. so check that */ + if (board_is_am571x_idk() && !am571x_idk_needs_lcd()) + goto out; + + r = i2c_set_bus_num(OSD_TS_FT_BUS_ADDRESS); + if (r) { + printf("%s: Failed to set bus address to %d: %d\n", + __func__, OSD_TS_FT_BUS_ADDRESS, r); + goto out; + } + r = i2c_probe(OSD_TS_FT_CHIP_ADDRESS); + if (r) { + /* AM572x IDK has no explicit settings for optional LCD kit */ + if (board_is_am571x_idk()) { + printf("%s: Touch screen detect failed: %d!\n", + __func__, r); + } + goto out; + } + + /* Read FT ID */ + r = i2c_read(OSD_TS_FT_CHIP_ADDRESS, OSD_TS_FT_REG_ID, 1, &buf, 1); + if (r) { + printf("%s: Touch screen ID read %d:0x%02x[0x%02x] failed:%d\n", + __func__, OSD_TS_FT_BUS_ADDRESS, OSD_TS_FT_CHIP_ADDRESS, + OSD_TS_FT_REG_ID, r); + goto out; + } + + switch (buf) { + case OSD_TS_FT_ID_5606: + idk_lcd = "osd101t2045"; + break; + case OSD_TS_FT_ID_5x46: + idk_lcd = "osd101t2587"; + break; + default: + printf("%s: Unidentifed Touch screen ID 0x%02x\n", + __func__, buf); + /* we will let default be "no lcd" */ + } +out: + setenv("idk_lcd", idk_lcd); + return; +} +int board_late_init(void) +{ setup_board_eeprom_env(); u8 val; @@ -507,12 +574,7 @@ int board_late_init(void) omap_die_id_serial(); - /* TBD: Add LCD panel detection once information is available */ - if (am571x_idk_needs_lcd()) - idk_lcd = "osd101t2045"; /* Default to legacy LCD */ - else - idk_lcd = "no"; - setenv("idk_lcd", idk_lcd); + am57x_idk_lcd_detect(); #if !defined(CONFIG_SPL_BUILD) board_ti_set_ethaddr(2);