Add SoC level initialization code - arch_cpu_init - mmu table - detect cpu revision - reset cpu and wdog settings - timer init - wdog settings - lowlevel init to save/restore registers - a few dummy header file to avoid build failure - ft_system_setup Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>master
parent
c1ef486327
commit
fcdbde7ce0
@ -0,0 +1,10 @@ |
||||
/*
|
||||
* Copyright 2017 NXP |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef _ASM_ARCH_MX8M_CRM_REGS_H |
||||
#define _ASM_ARCH_MX8M_CRM_REGS_H |
||||
/* Dummy header, some imx-common code needs this file */ |
||||
#endif |
@ -0,0 +1,12 @@ |
||||
/*
|
||||
* Copyright 2017 NXP |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __ASM_ARCH_MX8M_GPIO_H |
||||
#define __ASM_ARCH_MX8M_GPIO_H |
||||
|
||||
#include <asm/mach-imx/gpio.h> |
||||
|
||||
#endif |
@ -0,0 +1,18 @@ |
||||
/*
|
||||
* Copyright (C) 2017 NXP |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __ARCH_MX8M_SYS_PROTO_H |
||||
#define __ARCH_MX8M_SYS_PROTO_H |
||||
|
||||
#include <asm/mach-imx/sys_proto.h> |
||||
|
||||
void set_wdog_reset(struct wdog_regs *wdog); |
||||
void enable_tzc380(void); |
||||
void restore_boot_params(void); |
||||
extern unsigned long rom_pointer[]; |
||||
enum boot_device get_boot_device(void); |
||||
bool is_usb_boot(void); |
||||
#endif |
@ -0,0 +1,63 @@ |
||||
/* |
||||
* Copyright 2017 NXP |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <config.h> |
||||
|
||||
.align 8
|
||||
.global rom_pointer
|
||||
rom_pointer: |
||||
.space 256
|
||||
|
||||
/* |
||||
* Routine: save_boot_params (called after reset from start.S) |
||||
*/ |
||||
|
||||
.global save_boot_params
|
||||
save_boot_params: |
||||
/* The firmware provided ATAG/FDT address can be found in r2/x0 */ |
||||
adr x0, rom_pointer |
||||
stp x1, x2, [x0], #16 |
||||
stp x3, x4, [x0], #16 |
||||
stp x5, x6, [x0], #16 |
||||
stp x7, x8, [x0], #16 |
||||
stp x9, x10, [x0], #16 |
||||
stp x11, x12, [x0], #16 |
||||
stp x13, x14, [x0], #16 |
||||
stp x15, x16, [x0], #16 |
||||
stp x17, x18, [x0], #16 |
||||
stp x19, x20, [x0], #16 |
||||
stp x21, x22, [x0], #16 |
||||
stp x23, x24, [x0], #16 |
||||
stp x25, x26, [x0], #16 |
||||
stp x27, x28, [x0], #16 |
||||
stp x29, x30, [x0], #16 |
||||
mov x30, sp |
||||
str x30, [x0], #8 |
||||
|
||||
/* Returns */ |
||||
b save_boot_params_ret |
||||
|
||||
.global restore_boot_params
|
||||
restore_boot_params: |
||||
adr x0, rom_pointer |
||||
ldp x1, x2, [x0], #16 |
||||
ldp x3, x4, [x0], #16 |
||||
ldp x5, x6, [x0], #16 |
||||
ldp x7, x8, [x0], #16 |
||||
ldp x9, x10, [x0], #16 |
||||
ldp x11, x12, [x0], #16 |
||||
ldp x13, x14, [x0], #16 |
||||
ldp x15, x16, [x0], #16 |
||||
ldp x17, x18, [x0], #16 |
||||
ldp x19, x20, [x0], #16 |
||||
ldp x21, x22, [x0], #16 |
||||
ldp x23, x24, [x0], #16 |
||||
ldp x25, x26, [x0], #16 |
||||
ldp x27, x28, [x0], #16 |
||||
ldp x29, x30, [x0], #16 |
||||
ldr x0, [x0] |
||||
mov sp, x0 |
||||
ret |
@ -0,0 +1,227 @@ |
||||
/*
|
||||
* Copyright 2017 NXP |
||||
* |
||||
* Peng Fan <peng.fan@nxp.com> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <asm/arch/imx-regs.h> |
||||
#include <asm/io.h> |
||||
#include <asm/arch/clock.h> |
||||
#include <asm/arch/sys_proto.h> |
||||
#include <asm/mach-imx/hab.h> |
||||
#include <asm/mach-imx/boot_mode.h> |
||||
#include <asm/mach-imx/syscounter.h> |
||||
#include <asm/armv8/mmu.h> |
||||
#include <errno.h> |
||||
#include <fdt_support.h> |
||||
#include <fsl_wdog.h> |
||||
#include <imx_sip.h> |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
#if defined(CONFIG_SECURE_BOOT) |
||||
struct imx_sec_config_fuse_t const imx_sec_config_fuse = { |
||||
.bank = 1, |
||||
.word = 3, |
||||
}; |
||||
#endif |
||||
|
||||
int timer_init(void) |
||||
{ |
||||
#ifdef CONFIG_SPL_BUILD |
||||
struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; |
||||
unsigned long freq = readl(&sctr->cntfid0); |
||||
|
||||
/* Update with accurate clock frequency */ |
||||
asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory"); |
||||
|
||||
clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1, |
||||
SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG); |
||||
#endif |
||||
|
||||
gd->arch.tbl = 0; |
||||
gd->arch.tbu = 0; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
void enable_tzc380(void) |
||||
{ |
||||
struct iomuxc_gpr_base_regs *gpr = |
||||
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; |
||||
|
||||
/* Enable TZASC and lock setting */ |
||||
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN); |
||||
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK); |
||||
} |
||||
|
||||
void set_wdog_reset(struct wdog_regs *wdog) |
||||
{ |
||||
/*
|
||||
* Output WDOG_B signal to reset external pmic or POR_B decided by |
||||
* the board design. Without external reset, the peripherals/DDR/ |
||||
* PMIC are not reset, that may cause system working abnormal. |
||||
* WDZST bit is write-once only bit. Align this bit in kernel, |
||||
* otherwise kernel code will have no chance to set this bit. |
||||
*/ |
||||
setbits_le16(&wdog->wcr, WDOG_WDT_MASK | WDOG_WDZST_MASK); |
||||
} |
||||
|
||||
static struct mm_region imx8m_mem_map[] = { |
||||
{ |
||||
/* ROM */ |
||||
.virt = 0x0UL, |
||||
.phys = 0x0UL, |
||||
.size = 0x100000UL, |
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
||||
PTE_BLOCK_OUTER_SHARE |
||||
}, { |
||||
/* OCRAM */ |
||||
.virt = 0x900000UL, |
||||
.phys = 0x900000UL, |
||||
.size = 0x200000UL, |
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
||||
PTE_BLOCK_OUTER_SHARE |
||||
}, { |
||||
/* AIPS */ |
||||
.virt = 0xB00000UL, |
||||
.phys = 0xB00000UL, |
||||
.size = 0x3f500000UL, |
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
||||
PTE_BLOCK_NON_SHARE | |
||||
PTE_BLOCK_PXN | PTE_BLOCK_UXN |
||||
}, { |
||||
/* DRAM1 */ |
||||
.virt = 0x40000000UL, |
||||
.phys = 0x40000000UL, |
||||
.size = 0xC0000000UL, |
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
||||
PTE_BLOCK_OUTER_SHARE |
||||
}, { |
||||
/* DRAM2 */ |
||||
.virt = 0x100000000UL, |
||||
.phys = 0x100000000UL, |
||||
.size = 0x040000000UL, |
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
||||
PTE_BLOCK_OUTER_SHARE |
||||
}, { |
||||
/* List terminator */ |
||||
0, |
||||
} |
||||
}; |
||||
|
||||
struct mm_region *mem_map = imx8m_mem_map; |
||||
|
||||
u32 get_cpu_rev(void) |
||||
{ |
||||
struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR; |
||||
u32 reg = readl(&ana_pll->digprog); |
||||
u32 type = (reg >> 16) & 0xff; |
||||
u32 rom_version; |
||||
|
||||
reg &= 0xff; |
||||
|
||||
if (reg == CHIP_REV_1_0) { |
||||
/*
|
||||
* For B0 chip, the DIGPROG is not updated, still TO1.0. |
||||
* we have to check ROM version further |
||||
*/ |
||||
rom_version = readl((void __iomem *)ROM_VERSION_A0); |
||||
if (rom_version != CHIP_REV_1_0) { |
||||
rom_version = readl((void __iomem *)ROM_VERSION_B0); |
||||
if (rom_version >= CHIP_REV_2_0) |
||||
reg = CHIP_REV_2_0; |
||||
} |
||||
} |
||||
|
||||
return (type << 12) | reg; |
||||
} |
||||
|
||||
static void imx_set_wdog_powerdown(bool enable) |
||||
{ |
||||
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; |
||||
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; |
||||
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR; |
||||
|
||||
/* Write to the PDE (Power Down Enable) bit */ |
||||
writew(enable, &wdog1->wmcr); |
||||
writew(enable, &wdog2->wmcr); |
||||
writew(enable, &wdog3->wmcr); |
||||
} |
||||
|
||||
int arch_cpu_init(void) |
||||
{ |
||||
/*
|
||||
* Init timer at very early state, because sscg pll setting |
||||
* will use it |
||||
*/ |
||||
timer_init(); |
||||
|
||||
if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
||||
clock_init(); |
||||
imx_set_wdog_powerdown(false); |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
bool is_usb_boot(void) |
||||
{ |
||||
return get_boot_device() == USB_BOOT; |
||||
} |
||||
|
||||
#ifdef CONFIG_OF_SYSTEM_SETUP |
||||
int ft_system_setup(void *blob, bd_t *bd) |
||||
{ |
||||
int i = 0; |
||||
int rc; |
||||
int nodeoff; |
||||
|
||||
/* Disable the CPU idle for A0 chip since the HW does not support it */ |
||||
if (is_soc_rev(CHIP_REV_1_0)) { |
||||
static const char * const nodes_path[] = { |
||||
"/cpus/cpu@0", |
||||
"/cpus/cpu@1", |
||||
"/cpus/cpu@2", |
||||
"/cpus/cpu@3", |
||||
}; |
||||
|
||||
for (i = 0; i < ARRAY_SIZE(nodes_path); i++) { |
||||
nodeoff = fdt_path_offset(blob, nodes_path[i]); |
||||
if (nodeoff < 0) |
||||
continue; /* Not found, skip it */ |
||||
|
||||
printf("Found %s node\n", nodes_path[i]); |
||||
|
||||
rc = fdt_delprop(blob, nodeoff, "cpu-idle-states"); |
||||
if (rc) { |
||||
printf("Unable to update property %s:%s, err=%s\n", |
||||
nodes_path[i], "status", fdt_strerror(rc)); |
||||
return rc; |
||||
} |
||||
|
||||
printf("Remove %s:%s\n", nodes_path[i], |
||||
"cpu-idle-states"); |
||||
} |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
#endif |
||||
|
||||
void reset_cpu(ulong addr) |
||||
{ |
||||
struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; |
||||
|
||||
/* Clear WDA to trigger WDOG_B immediately */ |
||||
writew((WCR_WDE | WCR_SRS), &wdog->wcr); |
||||
|
||||
while (1) { |
||||
/*
|
||||
* spin for .5 seconds before reset |
||||
*/ |
||||
} |
||||
} |
Loading…
Reference in new issue