u-boot

Commit Graph

Author	SHA1	Message	Date
Wolfgang Denk	1a4596601f	Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>	12 years ago
Markus Hubig	7d899c14cc	Fixes the crippled console output on PortuxG20. In order to use the serial interface on the PortuxG20 we need to enable the level converter first by setting the PC9 pin to high. The level converter needs some time to settle so we have to use the mdelay() function to wait for some time. Unfortunately we have no timers available at board_early_init_f() so we enable the serial output early within board_postclk_init(). Now the U-Boot output looks fine: \| U-Boot 2012.07-00132-gaf1a3b0-dirty (Aug 16 2012 - 18:21:32) \| \| CPU: AT91SAM9G20 \| Crystal frequency: 18.432 MHz \| CPU clock : 396.288 MHz \| Master clock : 132.096 MHz \| DRAM: 64 MiB \| WARNING: Caches not enabled \| NAND: 128 MiB \| In: serial \| Out: serial \| Err: serial \| Net: macb0 \| Hit any key to stop autoboot: 0 Signed-off-by: Markus Hubig <mhubig@imko.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>	12 years ago
Markus Hubig	2399ef7385	at91: Add support for taskit AT91SAM9G20 boards. This adds support for the AT91SAM9G20 boards by taskit GmbH. Both boards, Stamp9G20 and PortuxG20, are integrated in one file. PortuxG20 is basically a SBC built around the Stamp9G20. Signed-off-by: Markus Hubig <mhubig@imko.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.deve@googlemail.com>	12 years ago

Author

SHA1

Message

Date

Wolfgang Denk

1a4596601f

Add GPL-2.0+ SPDX-License-Identifier to source files

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

12 years ago

Markus Hubig

7d899c14cc

Fixes the crippled console output on PortuxG20.

In order to use the serial interface on the PortuxG20 we need to enable the
level converter first by setting the PC9 pin to high. The level converter needs
some time to settle so we have to use the mdelay() function to wait for some
time. Unfortunately we have no timers available at board_early_init_f() so we
enable the serial output early within board_postclk_init().

Now the U-Boot output looks fine:

| U-Boot 2012.07-00132-gaf1a3b0-dirty (Aug 16 2012 - 18:21:32)
|
| CPU: AT91SAM9G20
| Crystal frequency:   18.432 MHz
| CPU clock        :  396.288 MHz
| Master clock     :  132.096 MHz
| DRAM:  64 MiB
| WARNING: Caches not enabled
| NAND:  128 MiB
| In:    serial
| Out:   serial
| Err:   serial
| Net:   macb0
| Hit any key to stop autoboot:  0

Signed-off-by: Markus Hubig <mhubig@imko.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

12 years ago

Markus Hubig

2399ef7385

at91: Add support for taskit AT91SAM9G20 boards.

This adds support for the AT91SAM9G20 boards by taskit GmbH.
Both boards, Stamp9G20 and PortuxG20, are integrated in one
file. PortuxG20 is basically a SBC built around the Stamp9G20.

Signed-off-by: Markus Hubig <mhubig@imko.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Andreas Bießmann <andreas.deve@googlemail.com>

12 years ago

3 Commits (262737f05aa94b29d24f21d7eae89756c242df8e)