3bb6680655
Fix mkimage bug with multifile images created on 64 bit systems.
19 years ago
c7428d49ac
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
19 years ago
97c8d0bbbd
Add support for 28F256J3A flash chips
19 years ago
27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
19 years ago
e6b6d16de7
Merge with /home/sr/git/u-boot
19 years ago
a9e642e2f8
MPC5200: Set PCI retry counter to 0 = infinite retry;
...
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
19 years ago
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
19 years ago
e43232dee8
Merge with /home/m8/git/u-boot
19 years ago
7481266e4e
19 years ago
3a7b142b62
Change port configuration for O2DNT (CODEC1 on PSC1)
19 years ago
a889bd27ef
Fix DPRAM offset/size for MPC8541/8555.
...
Simplify TQM85xx Makefile handling.
19 years ago
41253be442
Fix data overflow (typo?) in rtc/ds1302.c
19 years ago
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
19 years ago
c75eba3b41
Fix U-Boot compilation for MIPS boards using ELDK 4.0
19 years ago
4a86d779ff
Merge with /home/sr/git/u-boot
19 years ago
b6f8435664
Adjust TQM834x PHY addresses for latest hardware revision.
19 years ago
d00de23b15
Increase malloc arena on TQM5200 board to 256 kB.
...
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
19 years ago
d9785c14bf
Fix miiphy global data initialization (problem on 4xx boards when no
...
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().
Based on initial patch for 4xx platform by Matthias Fuchs.
19 years ago
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
19 years ago
a46726fdba
Compile warning fixed
...
Patch by Stefan Roese, 29 Nov 2005
19 years ago
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
19 years ago
1178a412d2
Minor AMCC 4xx board cleanups
...
Patch by Stefan Roese, 27 Nov 2005
19 years ago
0a69b26ed6
Increase IPB and PCI clocks for O2DNT board.
19 years ago
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
19 years ago
f08abe311b
Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
19 years ago
aa7cfc463a
Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
...
The COPYING file was extended to make clear that these files can be
used in non-GPL code, too.
19 years ago
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
19 years ago
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
19 years ago
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
19 years ago
3ca377638a
Add CHANGELOG entry
...
Patch by Stefan Roese, 15 Nov 2005
19 years ago
c7911c7e8f
Merge with /server/home/stefan/git/u-boot/bamboo-sdram
19 years ago
fd49bf0214
Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
...
Patch by Stefan Roese, 15 Nov 2005
19 years ago
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
19 years ago
3ada834e30
Add explanation for CDP checksum algorithm
19 years ago
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
19 years ago
527b5a511c
Fix MPC85xx PCI support (pci_register_hose() before pci config access)
...
Patch by Stefan Roese, 07 Nov 2005
19 years ago
182e10691f
Correct PPC Timebase register definitions (SPRN_TBRL...)
...
Patch by Stefan Roese, 07 Nov 2005
19 years ago
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
19 years ago
4d03a21f23
Adjust TQM85x PHY addresses for latest hardware revision.
19 years ago
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
19 years ago
8e9655f863
* Add hook to NAND erase and implement nand_wait function.
...
Patch by Mike Rapoport, 01 Nov 2005
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
19 years ago
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
19 years ago
d9f2f5008c
Merge with /git/u-boot.git
19 years ago
be360d9824
More verbose CHANGELOG entry.
19 years ago
5d4ee51061
Merge with /home/m8/git/u-boot
19 years ago
99eb35dbbf
Add missing CHANGELOG entries.
19 years ago
63ff004c4f
Add support for multiple PHYs.
19 years ago
fe93483a0a
Correct includes for flat tree builder.
19 years ago
170d5e6d4c
Fix conflicting types (flash_write()) in trab auto_update.c
19 years ago
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
19 years ago
Wolfgang Denk
Stefan Roese
Marian Balakowicz
Rafal Jaworowski
Wolfgang Denk