# # Copyright (c) 2011 The Chromium OS Authors. # # See file CREDITS for list of people who contributed to this # project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundatio; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # Device Tree Control in U-Boot ============================= This feature provides for run-time configuration of U-Boot via a flat device tree (fdt). U-Boot configuration has traditionally been done using CONFIG options in the board config file. This feature aims to make it possible for a single U-Boot binary to support multiple boards, with the exact configuration of each board controlled by a flat device tree (fdt). This is the approach recently taken by the ARM Linux kernel and has been used by PowerPC for some time. The fdt is a convenient vehicle for implementing run-time configuration for three reasons. Firstly it is easy to use, being a simple text file. It is extensible since it consists of nodes and properties in a nice hierarchical format. Finally, there is already excellent infrastructure for the fdt: a compiler checks the text file and converts it to a compact binary format, and a library is already available in U-Boot (libfdt) for handling this format. The dts directory contains a Makefile for building the device tree blob and embedding it in your U-Boot image. This is useful since it allows U-Boot to configure itself according to what it finds there. If you have a number of similar boards with different peripherals, you can describe the features of each board in the device tree file, and have a single generic source base. To enable this feature, add CONFIG_OF_CONTROL to your board config file. What is a Flat Device Tree? --------------------------- An fdt can be specified in source format as a text file. To read about the fdt syntax, take a look at the specification here: https://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf You also might find this section of the Linux kernel documentation useful: (access this in the Linux kernel source code) Documentation/devicetree/booting-without-of.txt There is also a mailing list: http://lists.ozlabs.org/listinfo/devicetree-discuss In case you are wondering, OF stands for Open Firmware. Tools ----- To use this feature you will need to get the device tree compiler here: git://jdl.com/software/dtc.git For example: $ git clone git://jdl.com/software/dtc.git $ cd dtc $ make $ sudo make install Then run the compiler (your version will vary): $ dtc -v Version: DTC 1.2.0-g2cb4b51f $ make tests $ cd tests $ ./run_tests.sh ********** TEST SUMMARY * Total testcases: 1371 * PASS: 1371 * FAIL: 0 * Bad configuration: 0 * Strange test result: 0 You will also find a useful ftdump utility for decoding a binary file. Where do I get an fdt file for my board? ---------------------------------------- You may find that the Linux kernel has a suitable file. Look in the kernel source in arch/<arch>/boot/dts. If not you might find other boards with suitable files that you can modify to your needs. Look in the board directories for files with a .dts extension. Failing that, you could write one from scratch yourself! Configuration ------------- Use: #define CONFIG_DEFAULT_DEVICE_TREE "<name>" to set the filename of the device tree source. Then put your device tree file into board/<vendor>/dts/<name>.dts This should include your CPU or SOC's device tree file, placed in arch/<arch>/dts, and then make any adjustments required. The name of this is CONFIG_ARCH_DEVICE_TREE.dts. If CONFIG_OF_EMBED is defined, then it will be picked up and built into the U-Boot image (including u-boot.bin). If CONFIG_OF_SEPARATE is defined, then it will be built and placed in a u-boot.dtb file alongside u-boot.bin. A common approach is then to join the two: cat u-boot.bin u-boot.dtb >image.bin and then flash image.bin onto your board. You cannot use both of these options at the same time. If you wish to put the fdt at a different address in memory, you can define the "fdtcontroladdr" environment variable. This is the hex address of the fdt binary blob, and will override either of the options. Be aware that this environment variable is checked prior to relocation, when only the compiled-in environment is available. Therefore it is not possible to define this variable in the saved SPI/NAND flash environment, for example (it will be ignored). To use this, put something like this in your board header file: #define CONFIG_EXTRA_ENV_SETTINGS "fdtcontroladdr=10000\0" Limitations ----------- U-Boot is designed to build with a single architecture type and CPU type. So for example it is not possible to build a single ARM binary which runs on your AT91 and OMAP boards, relying on an fdt to configure the various features. This is because you must select one of the CPU families within arch/arm/cpu/arm926ejs (omap or at91) at build time. Similarly you cannot build for multiple cpu types or architectures. That said the complexity reduction by using fdt to support variants of boards which use the same SOC / CPU can be substantial. It is important to understand that the fdt only selects options available in the platform / drivers. It cannot add new drivers (yet). So you must still have the CONFIG option to enable the driver. For example, you need to define CONFIG_SYS_NS16550 to bring in the NS16550 driver, but can use the fdt to specific the UART clock, peripheral address, etc. In very broad terms, the CONFIG options in general control *what* driver files are pulled in, and the fdt controls *how* those files work. -- Simon Glass <sjg@chromium.org> 1-Sep-11