/* * (C) Copyright 2003-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This file is based on mpc4200fec.c, * (C) Copyright Motorola, Inc., 2000 */ #include <common.h> #include <mpc8220.h> #include <malloc.h> #include <net.h> #include <miiphy.h> #include "dma.h" #include "fec.h" #undef DEBUG #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ defined(CONFIG_MPC8220_FEC) #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) #error "CONFIG_MII has to be defined!" #endif #ifdef DEBUG static void tfifo_print (char *devname, mpc8220_fec_priv * fec); static void rfifo_print (char *devname, mpc8220_fec_priv * fec); #endif /* DEBUG */ typedef struct { u8 data[1500]; /* actual data */ int length; /* actual length */ int used; /* buffer in use or not */ u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ } NBUF; int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal); int fec8220_miiphy_write (const char *devname, u8 phyAddr, u8 regAddr, u16 data); /********************************************************************/ #ifdef DEBUG static void mpc8220_fec_phydump (char *devname) { u16 phyStatus, i; u8 phyAddr = CONFIG_PHY_ADDR; u8 reg_mask[] = { #if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ /* regs to print: 0...7, 16...19, 21, 23, 24 */ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, #else /* regs to print: 0...8, 16...20 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, #endif }; for (i = 0; i < 32; i++) { if (reg_mask[i]) { miiphy_read (devname, phyAddr, i, &phyStatus); printf ("Mii reg %d: 0x%04x\n", i, phyStatus); } } } #endif /********************************************************************/ static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec) { int ix; char *data; static int once = 0; for (ix = 0; ix < FEC_RBD_NUM; ix++) { if (!once) { data = (char *) malloc (FEC_MAX_PKT_SIZE); if (data == NULL) { printf ("RBD INIT FAILED\n"); return -1; } fec->rbdBase[ix].dataPointer = (u32) data; } fec->rbdBase[ix].status = FEC_RBD_EMPTY; fec->rbdBase[ix].dataLength = 0; } once++; /* * have the last RBD to close the ring */ fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; fec->rbdIndex = 0; return 0; } /********************************************************************/ static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec) { int ix; for (ix = 0; ix < FEC_TBD_NUM; ix++) { fec->tbdBase[ix].status = 0; } /* * Have the last TBD to close the ring */ fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; /* * Initialize some indices */ fec->tbdIndex = 0; fec->usedTbdIndex = 0; fec->cleanTbdNum = FEC_TBD_NUM; } /********************************************************************/ static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd) { /* * Reset buffer descriptor as empty */ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); else pRbd->status = FEC_RBD_EMPTY; pRbd->dataLength = 0; /* * Now, we have an empty RxBD, restart the SmartDMA receive task */ DMA_TASK_ENABLE (FEC_RECV_TASK_NO); /* * Increment BD count */ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; } /********************************************************************/ static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec) { FEC_TBD *pUsedTbd; #ifdef DEBUG printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", fec->cleanTbdNum, fec->usedTbdIndex); #endif /* * process all the consumed TBDs */ while (fec->cleanTbdNum < FEC_TBD_NUM) { pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; if (pUsedTbd->status & FEC_TBD_READY) { #ifdef DEBUG printf ("Cannot clean TBD %d, in use\n", fec->cleanTbdNum); #endif return; } /* * clean this buffer descriptor */ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) pUsedTbd->status = FEC_TBD_WRAP; else pUsedTbd->status = 0; /* * update some indeces for a correct handling of the TBD ring */ fec->cleanTbdNum++; fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; } } /********************************************************************/ static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac) { u8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ int bit; /* loop - counter */ u32 crc = 0xffffffff; /* initial value */ /* * The algorithm used is the following: * we loop on each of the six bytes of the provided address, * and we compute the CRC by left-shifting the previous * value by one position, so that each bit in the current * byte of the address may contribute the calculation. If * the latter and the MSB in the CRC are different, then * the CRC value so computed is also ex-ored with the * "polynomium generator". The current byte of the address * is also shifted right by one bit at each iteration. * This is because the CRC generatore in hardware is implemented * as a shift-register with as many ex-ores as the radixes * in the polynomium. This suggests that we represent the * polynomiumm itself as a 32-bit constant. */ for (byte = 0; byte < 6; byte++) { currByte = mac[byte]; for (bit = 0; bit < 8; bit++) { if ((currByte & 0x01) ^ (crc & 0x01)) { crc >>= 1; crc = crc ^ 0xedb88320; } else { crc >>= 1; } currByte >>= 1; } } crc = crc >> 26; /* * Set individual hash table register */ if (crc >= 32) { fec->eth->iaddr1 = (1 << (crc - 32)); fec->eth->iaddr2 = 0; } else { fec->eth->iaddr1 = 0; fec->eth->iaddr2 = (1 << crc); } /* * Set physical address */ fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; } /********************************************************************/ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis) { mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA; const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ #ifdef DEBUG printf ("mpc8220_fec_init... Begin\n"); #endif /* * Initialize RxBD/TxBD rings */ mpc8220_fec_rbd_init (fec); mpc8220_fec_tbd_init (fec); /* * Set up Pin Muxing for FEC 1 */ *(vu_long *) MMAP_PCFG = 0; *(vu_long *) (MMAP_PCFG + 4) = 0; /* * Clear FEC-Lite interrupt event register(IEVENT) */ fec->eth->ievent = 0xffffffff; /* * Set interrupt mask register */ fec->eth->imask = 0x00000000; /* * Set FEC-Lite receive control register(R_CNTRL): */ if (fec->xcv_type == SEVENWIRE) { /* * Frame length=1518; 7-wire mode */ fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ } else { /* * Frame length=1518; MII mode; */ fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ } fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ /* tbd - rtm */ /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */ /* No MII for 7-wire mode */ fec->eth->mii_speed = 0x00000030; } /* * Set Opcode/Pause Duration Register */ fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */ /* * Set Rx FIFO alarm and granularity value */ fec->eth->rfifo_cntrl = 0x0c000000; fec->eth->rfifo_alarm = 0x0000030c; #ifdef DEBUG if (fec->eth->rfifo_status & 0x00700000) { printf ("mpc8220_fec_init() RFIFO error\n"); } #endif /* * Set Tx FIFO granularity value */ /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */ fec->eth->tfifo_cntrl = 0x0e000000; #ifdef DEBUG printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); #endif /* * Set transmit fifo watermark register(X_WMRK), default = 64 */ fec->eth->tfifo_alarm = 0x00000080; fec->eth->x_wmrk = 0x2; /* * Set individual address filter for unicast address * and set physical address registers. */ mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr)); /* * Set multicast address filter */ fec->eth->gaddr1 = 0x00000000; fec->eth->gaddr2 = 0x00000000; /* * Turn ON cheater FSM: ???? */ fec->eth->xmit_fsm = 0x03000000; #if 1 /*#if defined(CONFIG_MPC5200)*/ /* * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't * work w/ the current receive task. */ dma->PtdCntrl |= 0x00000001; #endif /* * Set priority of different initiators */ dma->IPR0 = 7; /* always */ dma->IPR3 = 6; /* Eth RX */ dma->IPR4 = 5; /* Eth Tx */ /* * Clear SmartDMA task interrupt pending bits */ DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); /* * Initialize SmartDMA parameters stored in SRAM */ *(int *) FEC_TBD_BASE = (int) fec->tbdBase; *(int *) FEC_RBD_BASE = (int) fec->rbdBase; *(int *) FEC_TBD_NEXT = (int) fec->tbdBase; *(int *) FEC_RBD_NEXT = (int) fec->rbdBase; if (fec->xcv_type != SEVENWIRE) { /* * Initialize PHY(LXT971A): * * Generally, on power up, the LXT971A reads its configuration * pins to check for forced operation, If not cofigured for * forced operation, it uses auto-negotiation/parallel detection * to automatically determine line operating conditions. * If the PHY device on the other side of the link supports * auto-negotiation, the LXT971A auto-negotiates with it * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not * support auto-negotiation, the LXT971A automatically detects * the presence of either link pulses(10Mbps PHY) or Idle * symbols(100Mbps) and sets its operating conditions accordingly. * * When auto-negotiation is controlled by software, the following * steps are recommended. * * Note: * The physical address is dependent on hardware configuration. * */ int timeout = 1; u16 phyStatus; /* * Reset PHY, then delay 300ns */ miiphy_write (dev->name, phyAddr, 0x0, 0x8000); udelay (1000); if (fec->xcv_type == MII10) { /* * Force 10Base-T, FDX operation */ #ifdef DEBUG printf ("Forcing 10 Mbps ethernet link... "); #endif miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); /* miiphy_write(fec, phyAddr, 0x0, 0x0100); */ miiphy_write (dev->name, phyAddr, 0x0, 0x0180); timeout = 20; do { /* wait for link status to go down */ udelay (10000); if ((timeout--) == 0) { #ifdef DEBUG printf ("hmmm, should not have waited..."); #endif break; } miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); #ifdef DEBUG printf ("="); #endif } while ((phyStatus & 0x0004)); /* !link up */ timeout = 1000; do { /* wait for link status to come back up */ udelay (10000); if ((timeout--) == 0) { printf ("failed. Link is down.\n"); break; } miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); #ifdef DEBUG printf ("+"); #endif } while (!(phyStatus & 0x0004)); /* !link up */ #ifdef DEBUG printf ("done.\n"); #endif } else { /* MII100 */ /* * Set the auto-negotiation advertisement register bits */ miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); /* * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation */ miiphy_write (dev->name, phyAddr, 0x0, 0x1200); /* * Wait for AN completion */ timeout = 5000; do { udelay (1000); if ((timeout--) == 0) { #ifdef DEBUG printf ("PHY auto neg 0 failed...\n"); #endif return -1; } if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { #ifdef DEBUG printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); #endif return -1; } } while (!(phyStatus & 0x0004)); #ifdef DEBUG printf ("PHY auto neg complete! \n"); #endif } } /* * Enable FEC-Lite controller */ fec->eth->ecntrl |= 0x00000006; #ifdef DEBUG if (fec->xcv_type != SEVENWIRE) mpc8220_fec_phydump (dev->name); #endif /* * Enable SmartDMA receive task */ DMA_TASK_ENABLE (FEC_RECV_TASK_NO); #ifdef DEBUG printf ("mpc8220_fec_init... Done \n"); #endif return 1; } /********************************************************************/ static void mpc8220_fec_halt (struct eth_device *dev) { mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; int counter = 0xffff; #ifdef DEBUG if (fec->xcv_type != SEVENWIRE) mpc8220_fec_phydump (dev->name); #endif /* * mask FEC chip interrupts */ fec->eth->imask = 0; /* * issue graceful stop command to the FEC transmitter if necessary */ fec->eth->x_cntrl |= 0x00000001; /* * wait for graceful stop to register */ while ((counter--) && (!(fec->eth->ievent & 0x10000000))); /* * Disable SmartDMA tasks */ DMA_TASK_DISABLE (FEC_XMIT_TASK_NO); DMA_TASK_DISABLE (FEC_RECV_TASK_NO); /* * Disable the Ethernet Controller */ fec->eth->ecntrl &= 0xfffffffd; /* * Clear FIFO status registers */ fec->eth->rfifo_status &= 0x00700000; fec->eth->tfifo_status &= 0x00700000; fec->eth->reset_cntrl = 0x01000000; /* * Issue a reset command to the FEC chip */ fec->eth->ecntrl |= 0x1; /* * wait at least 16 clock cycles */ udelay (10); #ifdef DEBUG printf ("Ethernet task stopped\n"); #endif } #ifdef DEBUG /********************************************************************/ static void tfifo_print (char *devname, mpc8220_fec_priv * fec) { u16 phyAddr = CONFIG_PHY_ADDR; u16 phyStatus; if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { miiphy_read (devname, phyAddr, 0x1, &phyStatus); printf ("\nphyStatus: 0x%04x\n", phyStatus); printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl); printf ("ievent: 0x%08x\n", fec->eth->ievent); printf ("x_status: 0x%08x\n", fec->eth->x_status); printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status); printf (" control 0x%08x\n", fec->eth->tfifo_cntrl); printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm); printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr); printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr); } } static void rfifo_print (char *devname, mpc8220_fec_priv * fec) { u16 phyAddr = CONFIG_PHY_ADDR; u16 phyStatus; if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { miiphy_read (devname, phyAddr, 0x1, &phyStatus); printf ("\nphyStatus: 0x%04x\n", phyStatus); printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl); printf ("ievent: 0x%08x\n", fec->eth->ievent); printf ("x_status: 0x%08x\n", fec->eth->x_status); printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status); printf (" control 0x%08x\n", fec->eth->rfifo_cntrl); printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm); printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr); printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr); } } #endif /* DEBUG */ /********************************************************************/ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data, int data_length) { /* * This routine transmits one frame. This routine only accepts * 6-byte Ethernet addresses. */ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; FEC_TBD *pTbd; #ifdef DEBUG printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status); tfifo_print (dev->name, fec); #endif /* * Clear Tx BD ring at first */ mpc8220_fec_tbd_scrub (fec); /* * Check for valid length of data. */ if ((data_length > 1500) || (data_length <= 0)) { return -1; } /* * Check the number of vacant TxBDs. */ if (fec->cleanTbdNum < 1) { #ifdef DEBUG printf ("No available TxBDs ...\n"); #endif return -1; } /* * Get the first TxBD to send the mac header */ pTbd = &fec->tbdBase[fec->tbdIndex]; pTbd->dataLength = data_length; pTbd->dataPointer = (u32) eth_data; pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; #ifdef DEBUG printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); #endif /* * Kick the MII i/f */ if (fec->xcv_type != SEVENWIRE) { u16 phyStatus; miiphy_read (dev->name, 0, 0x1, &phyStatus); } /* * Enable SmartDMA transmit task */ #ifdef DEBUG tfifo_print (dev->name, fec); #endif DMA_TASK_ENABLE (FEC_XMIT_TASK_NO); #ifdef DEBUG tfifo_print (dev->name, fec); #endif #ifdef DEBUG printf ("+"); #endif fec->cleanTbdNum -= 1; #ifdef DEBUG printf ("smartDMA ethernet Tx task enabled\n"); #endif /* * wait until frame is sent . */ while (pTbd->status & FEC_TBD_READY) { udelay (10); #ifdef DEBUG printf ("TDB status = %04x\n", pTbd->status); #endif } return 0; } /********************************************************************/ static int mpc8220_fec_recv (struct eth_device *dev) { /* * This command pulls one frame from the card */ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; unsigned long ievent; int frame_length, len = 0; NBUF *frame; #ifdef DEBUG printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex); printf ("-"); #endif /* * Check if any critical events have happened */ ievent = fec->eth->ievent; fec->eth->ievent = ievent; if (ievent & 0x20060000) { /* BABT, Rx/Tx FIFO errors */ mpc8220_fec_halt (dev); mpc8220_fec_init (dev, NULL); return 0; } if (ievent & 0x80000000) { /* Heartbeat error */ fec->eth->x_cntrl |= 0x00000001; } if (ievent & 0x10000000) { /* Graceful stop complete */ if (fec->eth->x_cntrl & 0x00000001) { mpc8220_fec_halt (dev); fec->eth->x_cntrl &= ~0x00000001; mpc8220_fec_init (dev, NULL); } } if (!(pRbd->status & FEC_RBD_EMPTY)) { if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) && ((pRbd->dataLength - 4) > 14)) { /* * Get buffer address and size */ frame = (NBUF *) pRbd->dataPointer; frame_length = pRbd->dataLength - 4; #if (0) { int i; printf ("recv data hdr:"); for (i = 0; i < 14; i++) printf ("%x ", *(frame->head + i)); printf ("\n"); } #endif /* * Fill the buffer and pass it to upper layers */ /* memcpy(buff, frame->head, 14); memcpy(buff + 14, frame->data, frame_length);*/ NetReceive ((volatile uchar *) pRbd->dataPointer, frame_length); len = frame_length; } /* * Reset buffer descriptor as empty */ mpc8220_fec_rbd_clean (fec, pRbd); } DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); return len; } /********************************************************************/ int mpc8220_fec_initialize (bd_t * bis) { mpc8220_fec_priv *fec; #ifdef CONFIG_HAS_ETH1 mpc8220_fec_priv *fec2; #endif struct eth_device *dev; char *tmp, *end; char env_enetaddr[6]; #ifdef CONFIG_HAS_ETH1 char env_enet1addr[6]; #endif int i; fec = (mpc8220_fec_priv *) malloc (sizeof (*fec)); dev = (struct eth_device *) malloc (sizeof (*dev)); memset (dev, 0, sizeof *dev); fec->eth = (ethernet_regs *) MMAP_FEC1; #ifdef CONFIG_HAS_ETH1 fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec)); fec2->eth = (ethernet_regs *) MMAP_FEC2; #endif fec->tbdBase = (FEC_TBD *) FEC_BD_BASE; fec->rbdBase = (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD)); fec->xcv_type = MII100; dev->priv = (void *) fec; dev->iobase = MMAP_FEC1; dev->init = mpc8220_fec_init; dev->halt = mpc8220_fec_halt; dev->send = mpc8220_fec_send; dev->recv = mpc8220_fec_recv; sprintf (dev->name, "FEC"); eth_register (dev); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register (dev->name, fec8220_miiphy_read, fec8220_miiphy_write); #endif /* * Try to set the mac address now. The fec mac address is * a garbage after reset. When not using fec for booting * the Linux fec driver will try to work with this garbage. */ tmp = getenv ("ethaddr"); if (tmp) { for (i = 0; i < 6; i++) { env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; if (tmp) tmp = (*end) ? end + 1 : end; } mpc8220_fec_set_hwaddr (fec, env_enetaddr); } #ifdef CONFIG_HAS_ETH1 tmp = getenv ("eth1addr"); if (tmp) { for (i = 0; i < 6; i++) { env_enet1addr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; if (tmp) tmp = (*end) ? end + 1 : end; } mpc8220_fec_set_hwaddr (fec2, env_enet1addr); } #endif return 1; } /* MII-interface related functions */ /********************************************************************/ int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal) { ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1; u32 reg; /* convenient holder for the PHY register */ u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; /* * reading from any PHY's register is done by properly * programming the FEC's MII data register. */ reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); /* * wait for the related interrupt */ while ((timeout--) && (!(eth->ievent & 0x00800000))); if (timeout == 0) { #ifdef DEBUG printf ("Read MDIO failed...\n"); #endif return -1; } /* * clear mii interrupt bit */ eth->ievent = 0x00800000; /* * it's now safe to read the PHY's register */ *retVal = (u16) eth->mii_data; return 0; } /********************************************************************/ int fec8220_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data) { ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1; u32 reg; /* convenient holder for the PHY register */ u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | FEC_MII_DATA_TA | phy | reg | data); /* * wait for the MII interrupt */ while ((timeout--) && (!(eth->ievent & 0x00800000))); if (timeout == 0) { #ifdef DEBUG printf ("Write MDIO failed...\n"); #endif return -1; } /* * clear MII interrupt bit */ eth->ievent = 0x00800000; return 0; } #endif /* CONFIG_MPC8220_FEC */