/** * @file IxAtmm.h * * @date 3-DEC-2001 * * @brief Header file for the IXP400 ATM Manager component (IxAtmm) * * * @par * IXP400 SW Release version 2.0 * * -- Copyright Notice -- * * @par * Copyright 2001-2005, Intel Corporation. * All rights reserved. * * @par * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ /** * @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API * * @brief IXP400 ATM Manager component Public API * * @{ */ #ifndef IXATMM_H #define IXATMM_H /* * Put the user defined include files required */ #include "IxAtmSch.h" #include "IxOsalTypes.h" /* * #defines and macros used in this file. */ /** * @def IX_ATMM_RET_ALREADY_INITIALIZED * * @brief Component has already been initialized */ #define IX_ATMM_RET_ALREADY_INITIALIZED 2 /** * @def IX_ATMM_RET_INVALID_PORT * * @brief Specified port does not exist or is out of range */ #define IX_ATMM_RET_INVALID_PORT 3 /** * @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR * * @brief The VC description does not adhere to ATM standards */ #define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4 /** * @def IX_ATMM_RET_VC_CONFLICT * * @brief The VPI/VCI values supplied are either reserved, or they * conflict with a previously registered VC on this port */ #define IX_ATMM_RET_VC_CONFLICT 5 /** * @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL * * @brief The virtual connection cannot be established on the port * because the remaining port capacity is not sufficient to * support it */ #define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6 /** * @def IX_ATMM_RET_NO_SUCH_VC * * @brief No registered VC, as described by the supplied VCI/VPI or * VC identifier values, exists on this port */ #define IX_ATMM_RET_NO_SUCH_VC 7 /** * @def IX_ATMM_RET_INVALID_VC_ID * * @brief The specified VC identifier is out of range. */ #define IX_ATMM_RET_INVALID_VC_ID 8 /** * @def IX_ATMM_RET_INVALID_PARAM_PTR * * @brief A pointer parameter was NULL. */ #define IX_ATMM_RET_INVALID_PARAM_PTR 9 /** * @def IX_ATMM_UTOPIA_SPHY_ADDR * * @brief The phy address when in SPHY mode */ #define IX_ATMM_UTOPIA_SPHY_ADDR 31 /** * @def IX_ATMM_THREAD_PRI_HIGH * * @brief The value of high priority thread */ #define IX_ATMM_THREAD_PRI_HIGH 90 /* * Typedefs whose scope is limited to this file. */ /** @brief Definition for use in the @ref IxAtmmVc structure. * Indicates the direction of a VC */ typedef enum { IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/ IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/ IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/ } IxAtmmVcDirection; /** @brief Definition for use with @ref IxAtmmVcChangeCallback * callback. Indicates that the event type represented by the * callback for this VC. */ typedef enum { IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/ IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/ IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/ } IxAtmmVcChangeEvent; /** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to * indicate that UTOPIA loopback should be enabled or disabled * on initialisation. */ typedef enum { IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/ IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/ IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/ } IxAtmmUtopiaLoopbackMode; /** @brief This structure describes the required attributes of a * virtual connection. */ typedef struct { unsigned vpi; /**< VPI value of this virtual connection */ unsigned vci; /**< VCI value of this virtual connection. */ IxAtmmVcDirection direction; /**< VC direction */ /** Traffic descriptor of this virtual connection. This structure * is defined by the @ref IxAtmSch component. */ IxAtmTrafficDescriptor trafficDesc; } IxAtmmVc; /** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to * indicate that UTOPIA multi-phy/single-phy mode is used. */ typedef enum { IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/ IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/ IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/ } IxAtmmPhyMode; /** @brief Structure contains port-specific information required to * initialize IxAtmm, and specifically, the IXP400 UTOPIA * Level-2 device. */ typedef struct { unsigned reserved_1:11; /**< [31:21] Should be zero */ unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the * transmit (Tx) PHY for this * port on the 5-bit UTOPIA * Level-2 address bus */ unsigned reserved_2:11; /**< [15:5] Should be zero */ unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive * (Rx) PHY for this port on the * 5-bit UTOPIA Level-2 * address bus */ } IxAtmmPortCfg; /** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface * Defines a callback type which will be used to notify registered * users of registration/deregistration events on a particular port * * @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating * whether the VC supplied has been added or * removed * * @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has * occurred * * @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives * details of the VC which has been added * or removed on the port */ typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType, IxAtmLogicalPort port, const IxAtmmVc* vcChanged); /* * Variable declarations global to this file only. Externs are followed by * static variables. */ /* * Extern function prototypes */ /* * Function declarations */ /** * @ingroup IxAtmm * * @fn ixAtmmInit (void) * * @brief Interface to initialize the IxAtmm software component. Can * be called once only. * * Must be called before any other IxAtmm API is called. * * @param "none" * * @return @li IX_SUCCESS : IxAtmm has been successfully initialized. * Calls to other IxAtmm interfaces may now be performed. * @return @li IX_FAIL : IxAtmm has already been initialized. */ PUBLIC IX_STATUS ixAtmmInit (void); /** * @ingroup IxAtmm * * @fn ixAtmmUtopiaInit (unsigned numPorts, IxAtmmPhyMode phyMode, IxAtmmPortCfg portCfgs[], IxAtmmUtopiaLoopbackMode loopbackMode) * * @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor * for the specified number of physical ports. The function * must be called before the ixAtmmPortInitialize interface * can operate successfully. * * @param numPorts unsigned [in] - Indicates the total number of logical * ports that are active on the device. Up to 12 ports are * supported. * * @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY * or MPHY mode. * * @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements * detailing the UTOPIA specific port characteristics. The * length of the array must be equal to the number of ports * activated. ATM ports are referred to by the relevant * offset in this array in all subsequent IxAtmm interface * calls. * * @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of * @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref * IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether * loopback should be enabled on the device. Loopback can * only be supported on a single PHY, therefore the numPorts * parameter must be 1 if loopback is enabled. * * @return @li IX_SUCCESS : Indicates that the UTOPIA device has been * successfully initialized for the supplied ports. * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has * already been initialized. * @return @li IX_FAIL : The supplied parameters are invalid or have been * rejected by the UTOPIA-NPE device. * * @warning * This interface may only be called once. * Port identifiers are assumed to range from 0 to (numPorts - 1) in all * instances. * In all subsequent calls to interfaces supplied by IxAtmm, the specified * port value is expected to represent the offset in the portCfgs array * specified in this interface. i.e. The first port in this array will * subsequently be represented as port 0, the second port as port 1, * and so on.*/ PUBLIC IX_STATUS ixAtmmUtopiaInit (unsigned numPorts, IxAtmmPhyMode phyMode, IxAtmmPortCfg portCfgs[], IxAtmmUtopiaLoopbackMode loopbackMode); /** * @ingroup IxAtmm * * @fn ixAtmmPortInitialize (IxAtmLogicalPort port, unsigned txPortRate, unsigned rxPortRate) * * @brief The interface is called following @ref ixAtmmUtopiaInit () * and before calls to any other IxAtmm interface. It serves * to activate the registered ATM port with IxAtmm. * * The transmit and receive port rates are specified in bits per * second. This translates to ATM cells per second according to the * following formula: CellsPerSecond = portRate / (53*8) The * IXP400 device supports only 53 byte cells. The client shall make * sure that the off-chip physical layer device has already been * initialized. * * IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling * on the port. * * This interface must be called once for each active port in the * system. The first time the interface is invoked, it will configure * the mechanism by which the handling of transmit, transmit-done and * receive are driven with the IxAtmdAcc component. * * This function is reentrant. * * @note The minimum tx rate that will be accepted is 424 bit/s which equates * to 1 cell (53 bytes) per second. * * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be * initialized. * * @param txPortRate unsigned [in] - Value specifies the * transmit port rate for this port in * bits/second. This value is used by the ATM Scheduler * component is evaluating VC access requests for the port. * * @param rxPortRate unsigned [in] - Value specifies the * receive port rate for this port in bits/second. * * @return @li IX_SUCCESS : The specificed ATM port has been successfully * initialized. IxAtmm is ready to accept VC registrations on * this port. * * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has * already been called successfully on this port. The current * call is rejected. * * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid. The request is rejected. * * @return @li IX_FAIL : IxAtmm could not initialize the port because the * inputs are not understood. * * @sa ixAtmmPortEnable, ixAtmmPortDisable * */ PUBLIC IX_STATUS ixAtmmPortInitialize (IxAtmLogicalPort port, unsigned txPortRate, unsigned rxPortRate); /** * @ingroup IxAtmm * * @fn ixAtmmPortModify (IxAtmLogicalPort port, unsigned txPortRate, unsigned rxPortRate) * * @brief A client may call this interface to change the existing * port rate (expressed in bits/second) on an established ATM * port. * * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be * initialized. * * @param txPortRate unsigned [in] - Value specifies the`` * transmit port rate for this port in * bits/second. This value is used by the ATM Scheduler * component is evaluating VC access requests for the port. * * @param rxPortRate unsigned [in] - Value specifies the * receive port rate for this port in * bits/second. * * @return @li IX_SUCCESS : The indicated ATM port rates have been * successfully modified. * * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid. The request is rejected. * * @return @li IX_FAIL : IxAtmm could not update the port because the * inputs are not understood, or the interface was called before * the port was initialized. */ PUBLIC IX_STATUS ixAtmmPortModify (IxAtmLogicalPort port, unsigned txPortRate, unsigned rxPortRate); /** * @ingroup IxAtmm * * @fn ixAtmmPortQuery (IxAtmLogicalPort port, unsigned *txPortRate, unsigned *rxPortRate); * * @brief The client may call this interface to request details on * currently registered transmit and receive rates for an ATM * port. * * @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the * rate details are requested. * * @param *txPortRate unsigned [out] - Pointer to a value * which will be filled with the value of the transmit port * rate specified in bits/second. * * @param *rxPortRate unsigned [out] - Pointer to a value * which will be filled with the value of the receive port * rate specified in bits/second. * * @return @li IX_SUCCESS : The information requested on the specified * port has been successfully supplied in the output. * * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid. The request is rejected. * * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was * NULL. * * @return @li IX_FAIL : IxAtmm could not update the port because the * inputs are not understood, or the interface was called before * the port was initialized. */ PUBLIC IX_STATUS ixAtmmPortQuery (IxAtmLogicalPort port, unsigned *txPortRate, unsigned *rxPortRate); /** * @ingroup IxAtmm * * @fn ixAtmmPortEnable(IxAtmLogicalPort port) * * @brief The client call this interface to enable transmit for an ATM * port. At initialisation, all the ports are disabled. * * @param port @ref IxAtmLogicalPort [in] - Value identifies the port * * @return @li IX_SUCCESS : Transmission over this port is started. * * @return @li IX_FAIL : The port parameter is not valid, or the * port is already enabled * * @note - When a port is disabled, Rx and Tx VC Connect requests will fail * * @note - This function uses system resources and should not be used * inside an interrupt context. * * @sa ixAtmmPortDisable */ PUBLIC IX_STATUS ixAtmmPortEnable(IxAtmLogicalPort port); /** * @ingroup IxAtmm * * @fn ixAtmmPortDisable(IxAtmLogicalPort port) * * @brief The client call this interface to disable transmit for an ATM * port. At initialisation, all the ports are disabled. * * @param port @ref IxAtmLogicalPort [in] - Value identifies the port * * @return @li IX_SUCCESS : Transmission over this port is stopped. * * @return @li IX_FAIL : The port parameter is not valid, or the * port is already disabled * * @note - When a port is disabled, Rx and Tx VC Connect requests will fail * * @note - This function call does not stop RX traffic. It is supposed * that this function is invoked when a serious problem * is detected (e.g. physical layer broken). Then, the RX traffic * is not passing. * * @note - This function is blocking until the hw acknowledge that the * transmission is stopped. * * @note - This function uses system resources and should not be used * inside an interrupt context. * * @sa ixAtmmPortEnable */ PUBLIC IX_STATUS ixAtmmPortDisable(IxAtmLogicalPort port); /** * @ingroup IxAtmm * * @fn ixAtmmVcRegister (IxAtmLogicalPort port, IxAtmmVc *vcToAdd, IxAtmSchedulerVcId *vcId) * * @brief This interface is used to register an ATM Virtual * Connection on the specified ATM port. * * Each call to this interface registers a unidirectional virtual * connection with the parameters specified. If a bi-directional VC * is needed, the function should be called twice (once for each * direction, Tx & Rx) where the VPI and VCI and port parameters in * each call are identical. * * With the addition of each new VC to a port, a series of * callback functions are invoked by the IxAtmm component to notify * possible external components of the change. The callback functions * are registered using the @ref ixAtmmVcChangeCallbackRegister interface. * * The IxAtmSch component is notified of the registration of transmit * VCs. * * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is * to be registered. * * @param *vcToAdd @ref IxAtmmVc [in] - Pointer to an @ref IxAtmmVc structure * containing a description of the VC to be registered. The * client shall fill the vpi, vci and direction and relevant * trafficDesc members of this structure before calling this * function. * * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled * with the per-port unique identifier value for this VC. * This identifier will be required when a request is * made to deregister or change this VC. VC identifiers * for transmit VCs will have a value between 0-43, * i.e. 32 data Tx VCs + 12 OAM Tx Port VCs. * Receive VCs will have a value between 44-66, * i.e. 32 data Rx VCs + 1 OAM Rx VC. * * @return @li IX_SUCCESS : The VC has been successfully registered on * this port. The VC is ready for a client to configure IxAtmdAcc * for receive and transmit operations on the VC. * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid or has not been initialized. The request * is rejected. * @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor * pointed to by vcToAdd is invalid. The registration request * is rejected. * @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with * reserved VPI and/or VCI values or with another VC already activated * on this port. * @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be * registered in the port becuase the port capacity is * insufficient to support the requested ATM traffic contract. * The registration request is rejected. * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was * NULL. * * @warning IxAtmm has no capability of signaling or negotiating a virtual * connection. Negotiation of the admission of the VC to the network * is beyond the scope of this function. This is assumed to be * performed by the calling client, if appropriate, * before or after this function is called. */ PUBLIC IX_STATUS ixAtmmVcRegister (IxAtmLogicalPort port, IxAtmmVc *vcToAdd, IxAtmSchedulerVcId *vcId); /** * @ingroup IxAtmm * * @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId) * * @brief Function called by a client to deregister a VC from the * system. * * With the removal of each new VC from a port, a series of * registered callback functions are invoked by the IxAtmm component * to notify possible external components of the change. The callback * functions are registered using the @ref ixAtmmVcChangeCallbackRegister. * * The IxAtmSch component is notified of the removal of transmit VCs. * * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be * removed is currently registered. * * @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to * be deregistered. This value was supplied to the client when the VC was originally registered. This value can also be queried from the IxAtmm component through the @ref ixAtmmVcQuery * interface. * * @return @li IX_SUCCESS : The specified VC has been successfully * removed from this port. * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid or has not been initialized. The request * is rejected. * @return @li IX_FAIL : There is no registered VC associated with the * supplied identifier registered on this port. */ PUBLIC IX_STATUS ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId); /** * @ingroup IxAtmm * * @fn ixAtmmVcQuery (IxAtmLogicalPort port, unsigned vpi, unsigned vci, IxAtmmVcDirection direction, IxAtmSchedulerVcId *vcId, IxAtmmVc *vcDesc) * * @brief This interface supplies information about an active VC on a * particular port when supplied with the VPI, VCI and * direction of that VC. * * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be * queried is currently registered. * * @param vpi unsigned [in] - ATM VPI value of the requested VC. * * @param vci unsigned [in] - ATM VCI value of the requested VC. * * @param direction @ref IxAtmmVcDirection [in] - One of @ref * IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX * indicating the direction (Tx or Rx) of the requested VC. * * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be * filled with the VC identifier value for the requested * VC (as returned by @ref ixAtmmVcRegister), if it * exists on this port. * * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure * which will be filled with the specific details of the * requested VC, if it exists on this port. * * @return @li IX_SUCCESS : The specified VC has been found on this port * and the requested details have been returned. * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid or has not been initialized. The request * is rejected. * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified * port which matches the search criteria (VPI, VCI, direction) * given. No data is returned. * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was * NULL. * */ PUBLIC IX_STATUS ixAtmmVcQuery (IxAtmLogicalPort port, unsigned vpi, unsigned vci, IxAtmmVcDirection direction, IxAtmSchedulerVcId *vcId, IxAtmmVc *vcDesc); /** * @ingroup IxAtmm * * @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc) * * @brief This interface supplies information about an active VC on a * particular port when supplied with a vcId for that VC. * * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be * queried is currently registered. * * @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which * uniquely identifies the requested VC on this port. * * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure * which will be filled with the specific details of the * requested VC, if it exists on this port. * * @return @li IX_SUCCESS : The specified VC has been found on this port * and the requested details have been returned. * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the * input is not valid or has not been initialized. The request * is rejected. * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified * port which matches the supplied identifier. No data is * returned. * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was * NULL. */ PUBLIC IX_STATUS ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc); /** * @ingroup IxAtmm * * @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback) * * @brief This interface is invoked to supply a function to IxAtmm * which will be called to notify the client if a new VC is * registered with IxAtmm or an existing VC is removed. * * The callback, when invoked, will run within the context of the call * to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused * the change of state. * * A maximum of 32 calbacks may be registered in with IxAtmm. * * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies * with the @ref IxAtmmVcChangeCallback definition. This * function will be invoked by IxAtmm with the appropiate * parameters for the relevant VC when any VC has been * registered or deregistered with IxAtmm. * * @return @li IX_SUCCESS : The specified callback has been registered * successfully with IxAtmm and will be invoked when appropriate. * @return @li IX_FAIL : Either the supplied callback is invalid, or * IxAtmm has already registered 32 and connot accommodate * any further registrations of this type. The request is * rejected. * * @warning The client must not call either the @ref * ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces * from within the supplied callback function. */ PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback); /** * @ingroup IxAtmm * * @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback) * * @brief This interface is invoked to deregister a previously supplied * callback function. * * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies * with the @ref IxAtmmVcChangeCallback definition. This * function will removed from the table of callbacks. * * @return @li IX_SUCCESS : The specified callback has been deregistered * successfully from IxAtmm. * @return @li IX_FAIL : Either the supplied callback is invalid, or * is not currently registered with IxAtmm. */ PUBLIC IX_STATUS ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback); /** * @ingroup IxAtmm * * @fn ixAtmmUtopiaStatusShow (void) * * @brief Display utopia status counters * * @param "none" * * @return @li IX_SUCCESS : Show function was successful * @return @li IX_FAIL : Internal failure */ PUBLIC IX_STATUS ixAtmmUtopiaStatusShow (void); /** * @ingroup IxAtmm * * @fn ixAtmmUtopiaCfgShow (void) * * @brief Display utopia information(config registers and status registers) * * @param "none" * * @return @li IX_SUCCESS : Show function was successful * @return @li IX_FAIL : Internal failure */ PUBLIC IX_STATUS ixAtmmUtopiaCfgShow (void); #endif /* IXATMM_H */ /** @} */