upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
198 lines
5.5 KiB
198 lines
5.5 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* (C) Copyright 2009-2011
|
|
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
|
|
* esd electronic system design gmbh <www.esd.eu>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
/*
|
|
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
|
|
* peripheral pins. Good to have if hardware is soldered optionally
|
|
* or in case of SPI no slave is selected. Avoid lines to float
|
|
* needlessly. Use a short local PUP define.
|
|
*
|
|
* Due to errata "TXD floats when CTS is inactive" pullups are always
|
|
* on for TXD pins.
|
|
*/
|
|
#ifdef CONFIG_AT91_GPIO_PULLUP
|
|
# define PUP CONFIG_AT91_GPIO_PULLUP
|
|
#else
|
|
# define PUP 0
|
|
#endif
|
|
|
|
void at91_serial0_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART0);
|
|
}
|
|
|
|
void at91_serial1_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART1);
|
|
}
|
|
|
|
void at91_serial2_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART2);
|
|
}
|
|
|
|
void at91_seriald_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
|
|
at91_periph_clk_enable(ATMEL_ID_SYS);
|
|
}
|
|
|
|
#ifdef CONFIG_ATMEL_SPI
|
|
void at91_spi0_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SPI0);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTB, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 11, 1);
|
|
}
|
|
}
|
|
|
|
void at91_spi1_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SPI1);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_GENERIC_ATMEL_MCI)
|
|
void at91_mci_hw_init(void)
|
|
{
|
|
at91_periph_clk_enable(ATMEL_ID_MCI1);
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */
|
|
|
|
#if defined(CONFIG_ATMEL_MCI_PORTB)
|
|
at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* MCI1_CDB */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* MCI1_DB0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 23, PUP); /* MCI1_DB1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 24, PUP); /* MCI1_DB2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* MCI1_DB3 */
|
|
#else
|
|
at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCI1_CDA */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCI1_DA0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCI1_DA1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCI1_DA2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCI1_DA3 */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
void at91_macb_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTE, 21, 0); /* ETXCK_EREFCK */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ERXDV */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 25, 0); /* ERX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 26, 0); /* ERX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 27, 0); /* ERXER */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 28, 0); /* ETXEN */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 23, 0); /* ETX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 24, 0); /* ETX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 30, 0); /* EMDIO */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 29, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_a_periph(AT91_PIO_PORTE, 22, 0); /* ECRS */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
void at91_uhp_hw_init(void)
|
|
{
|
|
/* Enable VBus on UHP ports */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 21, 0);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 24, 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_AT91_CAN
|
|
void at91_can_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_CAN);
|
|
}
|
|
#endif
|
|
|