upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/compulab/cm_t335/mux.c

116 lines
4.1 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Pinmux configuration for Compulab CM-T335 board
*
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
*
* Author: Ilya Ledvich <ilya@compulab.co.il>
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
{-1},
};
static struct module_pin_mux uart1_pin_mux[] = {
{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
{OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
{-1},
};
static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
{-1},
};
static struct module_pin_mux i2c0_pin_mux[] = {
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{-1},
};
static struct module_pin_mux i2c1_pin_mux[] = {
/* I2C_DATA */
{OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
/* I2C_SCLK */
{OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{-1},
};
static struct module_pin_mux rgmii1_pin_mux[] = {
{OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
{OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
{OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
{OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
{OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
{OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
{-1},
};
static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
{-1},
};
static struct module_pin_mux eth_phy_rst_pin_mux[] = {
{OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */
{-1},
};
static struct module_pin_mux status_led_pin_mux[] = {
{OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */
{-1},
};
void set_uart_mux_conf(void)
{
configure_module_pin_mux(uart0_pin_mux);
configure_module_pin_mux(uart1_pin_mux);
}
void set_mux_conf_regs(void)
{
configure_module_pin_mux(i2c0_pin_mux);
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(eth_phy_rst_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
configure_module_pin_mux(nand_pin_mux);
configure_module_pin_mux(status_led_pin_mux);
}