upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/rockchip/evb_rk3399/evb-rk3399.c

94 lines
2.0 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
#include <asm/arch/periph.h>
#include <power/regulator.h>
#include <spl.h>
int board_init(void)
{
struct udevice *pinctrl, *regulator;
int ret;
/*
* The PWM do not have decicated interrupt number in dts and can
* not get periph_id by pinctrl framework, so let's init them here.
* The PWM2 and PWM3 are for pwm regulater.
*/
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto out;
}
/* Enable pwm0 for panel backlight */
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM0);
if (ret) {
debug("%s PWM0 pinctrl init fail! (ret=%d)\n", __func__, ret);
goto out;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2);
if (ret) {
debug("%s PWM2 pinctrl init fail!\n", __func__);
goto out;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM3);
if (ret) {
debug("%s PWM3 pinctrl init fail!\n", __func__);
goto out;
}
ret = regulators_enable_boot_on(false);
if (ret)
debug("%s: Cannot enable boot on regulator\n", __func__);
ret = regulator_get_by_platname("vcc5v0_host", &regulator);
if (ret) {
debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
goto out;
}
ret = regulator_set_enable(regulator, true);
if (ret) {
debug("%s vcc5v0-host-en set fail!\n", __func__);
goto out;
}
out:
return 0;
}
void spl_board_init(void)
{
struct udevice *pinctrl;
int ret;
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto err;
}
/* Enable debug UART */
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
if (ret) {
debug("%s: Failed to set up console UART\n", __func__);
goto err;
}
preloader_console_init();
return;
err:
printf("%s: Error %d\n", __func__, ret);
/* No way to report error here */
hang();
}