upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Merlijn Wajer 3e07630e1b Some boards feature a capacitance on LDO3's output that is to large, ... causing inrush currents which as a result, shut down the AXP209. This has been reported before, without knowing the actual cause. A fix appeared to be done with commit 0e6e34ac8d ("sunxi: Olimex A20 boards: Enable LDO3 and LDO4 regulators"). The description there is a bit misleading, the kernel does not hang during AXP209 initialization, the PMIC shuts down, causing voltages to drop and thus the whole system to freeze. While the AXP209 does have the ability to ramp up the voltage slowly, to reduce these inrush currents, the voltage rate control (VRC) however is not applicable when switching on the LDO3 output. Only when going from an enabled lower voltage setting, to a higher voltage setting is the VRC in effect. To work around this problem, we set LDO3 to the lowest possible setting of 0.7 V if it was not yet enabled, and then let the VRC (if enabled) do its thing. It should be noted, that for some undocumented reason, there is a short delay needed between setting the LDO3 voltage register and enabling the power. One would expect that this delay ought to be just after enabling the output power at 0.7 V, but this did not work.		6 years ago
..
battery	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
domain	power domain: Introduce TI System Control Interface (TI SCI) power domain driver	6 years ago
fuel_gauge	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
mfd	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
pmic	Kconfig: Remove trailing whitespaces in prompt	6 years ago
regulator	regulator: pbias: Add additional compatible flags	6 years ago
Kconfig	Some boards feature a capacitance on LDO3's output that is to large,	6 years ago
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
axp152.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
axp209.c	Some boards feature a capacitance on LDO3's output that is to large,	6 years ago
axp221.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
axp809.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
axp818.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
exynos-tmu.c	power: change from meaningless value to error number	8 years ago
ftpmu010.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
palmas.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
power_core.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
power_dialog.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
power_fsl.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
power_i2c.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
power_spi.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
sy8106a.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
tps6586x.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
twl4030.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago
twl6030.c	SPDX: Convert all of our single license tags to Linux Kernel style	7 years ago