upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/command.h

227 lines
6.9 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
/*
* Definitions for Command Processor
*/
#ifndef __COMMAND_H
#define __COMMAND_H
#include <linker_lists.h>
#ifndef NULL
#define NULL 0
#endif
/* Default to a width of 8 characters for help message command width */
#ifndef CONFIG_SYS_HELP_CMD_WIDTH
#define CONFIG_SYS_HELP_CMD_WIDTH 8
#endif
#ifndef __ASSEMBLY__
/*
* Monitor Command Table
*/
struct cmd_tbl_s {
char *name; /* Command Name */
int maxargs; /* maximum number of arguments */
int repeatable; /* autorepeat allowed? */
/* Implementation function */
int (*cmd)(struct cmd_tbl_s *, int, int, char * const []);
char *usage; /* Usage message (short) */
#ifdef CONFIG_SYS_LONGHELP
char *help; /* Help message (long) */
#endif
#ifdef CONFIG_AUTO_COMPLETE
/* do auto completion on the arguments */
int (*complete)(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
#endif
};
typedef struct cmd_tbl_s cmd_tbl_t;
#if defined(CONFIG_CMD_RUN)
extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
/* common/command.c */
int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int
flag, int argc, char * const argv[]);
cmd_tbl_t *find_cmd(const char *cmd);
cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);
extern int cmd_usage(const cmd_tbl_t *cmdtp);
#ifdef CONFIG_AUTO_COMPLETE
extern int var_complete(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp);
#endif
/**
* cmd_process_error() - report and process a possible error
*
* @cmdtp: Command which caused the error
* @err: Error code (0 if none, -ve for error, like -EIO)
* @return 0 (CMD_RET_SUCCESS) if there is not error,
* 1 (CMD_RET_FAILURE) if an error is found
* -1 (CMD_RET_USAGE) if 'usage' error is found
*/
int cmd_process_error(cmd_tbl_t *cmdtp, int err);
/*
* Monitor Command
*
* All commands use a common argument format:
*
* void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
*/
#if defined(CONFIG_CMD_MEMORY) || \
defined(CONFIG_CMD_I2C) || \
defined(CONFIG_CMD_ITEST) || \
defined(CONFIG_CMD_PCI)
#define CMD_DATA_SIZE
extern int cmd_get_data_size(char* arg, int default_size);
#endif
#ifdef CONFIG_CMD_BOOTD
extern int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
#ifdef CONFIG_CMD_BOOTM
extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd);
#else
static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
{
return 0;
}
#endif
extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
char *const argv[]);
extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
char * const argv[]);
/*
* Error codes that commands return to cmd_process(). We use the standard 0
* and 1 for success and failure, but add one more case - failure with a
* request to call cmd_usage(). But the cmd_process() function handles
* CMD_RET_USAGE itself and after calling cmd_usage() it will return 1.
* This is just a convenience for commands to avoid them having to call
* cmd_usage() all over the place.
*/
enum command_ret_t {
CMD_RET_SUCCESS, /* 0 = Success */
CMD_RET_FAILURE, /* 1 = Failure */
CMD_RET_USAGE = -1, /* Failure, please report 'usage' error */
};
/**
* Process a command with arguments. We look up the command and execute it
* if valid. Otherwise we print a usage message.
*
* @param flag Some flags normally 0 (see CMD_FLAG_.. above)
* @param argc Number of arguments (arg 0 must be the command text)
* @param argv Arguments
* @param repeatable This function sets this to 0 if the command is not
* repeatable. If the command is repeatable, the value
* is left unchanged.
* @param ticks If ticks is not null, this function set it to the
* number of ticks the command took to complete.
* @return 0 if the command succeeded, 1 if it failed
*/
int cmd_process(int flag, int argc, char * const argv[],
int *repeatable, unsigned long *ticks);
void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
/**
* board_run_command() - Fallback function to execute a command
*
* When no command line features are enabled in U-Boot, this function is
* called to execute a command. Typically the function can look at the
* command and perform a few very specific tasks, such as booting the
* system in a particular way.
*
* This function is only used when CONFIG_CMDLINE is not enabled.
*
* In normal situations this function should not return, since U-Boot will
* simply hang.
*
* @cmdline: Command line string to execute
* @return 0 if OK, 1 for error
*/
int board_run_command(const char *cmdline);
#endif /* __ASSEMBLY__ */
/*
* Command Flags:
*/
#define CMD_FLAG_REPEAT 0x0001 /* repeat last command */
#define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */
#define CMD_FLAG_ENV 0x0004 /* command is from the environment */
#ifdef CONFIG_AUTO_COMPLETE
# define _CMD_COMPLETE(x) x,
#else
# define _CMD_COMPLETE(x)
#endif
#ifdef CONFIG_SYS_LONGHELP
# define _CMD_HELP(x) x,
#else
# define _CMD_HELP(x)
#endif
#ifdef CONFIG_CMDLINE
#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, _comp) \
{ #_name, _maxargs, _rep, _cmd, _usage, \
_CMD_HELP(_help) _CMD_COMPLETE(_comp) }
#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
ll_entry_declare(cmd_tbl_t, _name, cmd) = \
U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, _comp);
#else
#define U_BOOT_SUBCMD_START(name) static cmd_tbl_t name[] = {};
#define U_BOOT_SUBCMD_END
#define _CMD_REMOVE(_name, _cmd) \
int __remove_ ## _name(void) \
{ \
if (0) \
_cmd(NULL, 0, 0, NULL); \
return 0; \
}
#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, \
_help, _comp) \
{ #_name, _maxargs, _rep, 0 ? _cmd : NULL, _usage, \
_CMD_HELP(_help) _CMD_COMPLETE(_comp) }
#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, \
_comp) \
_CMD_REMOVE(sub_ ## _name, _cmd)
#endif /* CONFIG_CMDLINE */
#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \
U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \
U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, NULL)
#endif /* __COMMAND_H */