upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/fsl_usb.h

99 lines
2.7 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Freescale USB Controller
*
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#ifndef _ASM_FSL_USB_H_
#define _ASM_FSL_USB_H_
#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
struct ccsr_usb_port_ctrl {
u32 ctrl;
u32 drvvbuscfg;
u32 pwrfltcfg;
u32 sts;
u8 res_14[0xc];
u32 bistcfg;
u32 biststs;
u32 abistcfg;
u32 abiststs;
u8 res_30[0x10];
u32 xcvrprg;
u32 anaprg;
u32 anadrv;
u32 anasts;
};
struct ccsr_usb_phy {
u32 id;
struct ccsr_usb_port_ctrl port1;
u8 res_50[0xc];
u32 tvr;
u32 pllprg[4];
u8 res_70[0x4];
u32 anaccfg;
u32 dbg;
u8 res_7c[0x4];
struct ccsr_usb_port_ctrl port2;
u8 res_dc[0x334];
};
#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
#define CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV (1 << 0)
#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
#define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13)
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
#define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK (5 << 4)
#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK (6 << 16)
#define CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN (1 << 20)
#endif
#define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4)
#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
#define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0)
#define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN (1 << 7)
#define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK (3 << 4)
#define INC_DCNT_THRESHOLD_25MV (0 << 4)
#define INC_DCNT_THRESHOLD_50MV (1 << 4)
#define DEC_DCNT_THRESHOLD_25MV (2 << 4)
#define DEC_DCNT_THRESHOLD_50MV (3 << 4)
#else
struct ccsr_usb_phy {
u32 config1;
u32 config2;
u32 config3;
u32 config4;
u32 config5;
u32 status1;
u32 usb_enable_override;
u8 res[0xe4];
};
#define CONFIG_SYS_FSL_USB_HS_DISCNCT_INC (3 << 22)
#define CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL (1 << 20)
#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0 13
#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3 16
#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0 0
#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3 3
#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07
#endif
/* USB Erratum Checking code */
#if defined(CONFIG_PPC) || defined(CONFIG_ARM)
bool has_dual_phy(void);
bool has_erratum_a006261(void);
bool has_erratum_a007075(void);
bool has_erratum_a007798(void);
bool has_erratum_a007792(void);
bool has_erratum_a005697(void);
bool has_erratum_a004477(void);
bool has_erratum_a008751(void);
bool has_erratum_a010151(void);
#endif
#endif /*_ASM_FSL_USB_H_ */