upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
247 lines
6.4 KiB
247 lines
6.4 KiB
/*
|
|
* Functions related to OMAP3 SDRC.
|
|
*
|
|
* This file has been created after exctracting and consolidating
|
|
* the SDRC related content from mem.c and board.c, also created
|
|
* generic init function (mem_init).
|
|
*
|
|
* Copyright (C) 2004-2010
|
|
* Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Copyright (C) 2011
|
|
* Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
|
|
*
|
|
* Author :
|
|
* Vaibhav Hiremath <hvaibhav@ti.com>
|
|
*
|
|
* Original implementation by (mem.c, board.c) :
|
|
* Sunil Kumar <sunilsaini05@gmail.com>
|
|
* Shashi Ranjan <shashiranjanmca05@gmail.com>
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
extern omap3_sysinfo sysinfo;
|
|
|
|
static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
|
|
|
|
/*
|
|
* is_mem_sdr -
|
|
* - Return 1 if mem type in use is SDR
|
|
*/
|
|
u32 is_mem_sdr(void)
|
|
{
|
|
if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* make_cs1_contiguous -
|
|
* - For es2 and above remap cs1 behind cs0 to allow command line
|
|
* mem=xyz use all memory with out discontinuous support compiled in.
|
|
* Could do it at the ATAG, but there really is two banks...
|
|
* - Called as part of 2nd phase DDR init.
|
|
*/
|
|
void make_cs1_contiguous(void)
|
|
{
|
|
u32 size, a_add_low, a_add_high;
|
|
|
|
size = get_sdr_cs_size(CS0);
|
|
size >>= 25; /* divide by 32 MiB to find size to offset CS1 */
|
|
a_add_high = (size & 3) << 8; /* set up low field */
|
|
a_add_low = (size & 0x3C) >> 2; /* set up high field */
|
|
writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* get_sdr_cs_size -
|
|
* - Get size of chip select 0/1
|
|
*/
|
|
u32 get_sdr_cs_size(u32 cs)
|
|
{
|
|
u32 size;
|
|
|
|
/* get ram size field */
|
|
size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
|
|
size &= 0x3FF; /* remove unwanted bits */
|
|
size <<= 21; /* multiply by 2 MiB to find size in MB */
|
|
return size;
|
|
}
|
|
|
|
/*
|
|
* get_sdr_cs_offset -
|
|
* - Get offset of cs from cs0 start
|
|
*/
|
|
u32 get_sdr_cs_offset(u32 cs)
|
|
{
|
|
u32 offset;
|
|
|
|
if (!cs)
|
|
return 0;
|
|
|
|
offset = readl(&sdrc_base->cs_cfg);
|
|
offset = (offset & 15) << 27 | (offset & 0x30) << 17;
|
|
|
|
return offset;
|
|
}
|
|
|
|
/*
|
|
* do_sdrc_init -
|
|
* - Initialize the SDRAM for use.
|
|
* - code called once in C-Stack only context for CS0 and a possible 2nd
|
|
* time depending on memory configuration from stack+global context
|
|
*/
|
|
void do_sdrc_init(u32 cs, u32 early)
|
|
{
|
|
struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
|
|
|
|
if (early) {
|
|
/* reset sdrc controller */
|
|
writel(SOFTRESET, &sdrc_base->sysconfig);
|
|
wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
|
|
12000000);
|
|
writel(0, &sdrc_base->sysconfig);
|
|
|
|
/* setup sdrc to ball mux */
|
|
writel(SDRC_SHARING, &sdrc_base->sharing);
|
|
|
|
/* Disable Power Down of CKE cuz of 1 CKE on combo part */
|
|
writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
|
|
&sdrc_base->power);
|
|
|
|
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
|
|
sdelay(0x20000);
|
|
}
|
|
|
|
/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need
|
|
* to prevent this to be build in non-SPL build */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* If we use a SPL there is no x-loader nor config header so we have
|
|
* to do the job ourselfs
|
|
*/
|
|
if (cs == CS0) {
|
|
sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
|
|
|
|
/* General SDRC config */
|
|
writel(V_MCFG, &sdrc_base->cs[cs].mcfg);
|
|
writel(V_RFR_CTRL, &sdrc_base->cs[cs].rfr_ctrl);
|
|
|
|
/* AC timings */
|
|
writel(V_ACTIMA_165, &sdrc_actim_base0->ctrla);
|
|
writel(V_ACTIMB_165, &sdrc_actim_base0->ctrlb);
|
|
|
|
/* Initialize */
|
|
writel(CMD_NOP, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
|
|
|
|
writel(V_MR, &sdrc_base->cs[cs].mr);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* SDRC timings are set up by x-load or config header
|
|
* We don't need to redo them here.
|
|
* Older x-loads configure only CS0
|
|
* configure CS1 to handle this ommission
|
|
*/
|
|
if (cs == CS1) {
|
|
sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
|
|
sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
|
|
writel(readl(&sdrc_base->cs[CS0].mcfg),
|
|
&sdrc_base->cs[CS1].mcfg);
|
|
writel(readl(&sdrc_base->cs[CS0].rfr_ctrl),
|
|
&sdrc_base->cs[CS1].rfr_ctrl);
|
|
writel(readl(&sdrc_actim_base0->ctrla),
|
|
&sdrc_actim_base1->ctrla);
|
|
writel(readl(&sdrc_actim_base0->ctrlb),
|
|
&sdrc_actim_base1->ctrlb);
|
|
|
|
writel(CMD_NOP, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
|
|
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
|
|
writel(readl(&sdrc_base->cs[CS0].mr),
|
|
&sdrc_base->cs[CS1].mr);
|
|
}
|
|
|
|
/*
|
|
* Test ram in this bank
|
|
* Disable if bad or not present
|
|
*/
|
|
if (!mem_ok(cs))
|
|
writel(0, &sdrc_base->cs[cs].mcfg);
|
|
}
|
|
|
|
/*
|
|
* dram_init -
|
|
* - Sets uboots idea of sdram size
|
|
*/
|
|
int dram_init(void)
|
|
{
|
|
unsigned int size0 = 0, size1 = 0;
|
|
|
|
size0 = get_sdr_cs_size(CS0);
|
|
/*
|
|
* If a second bank of DDR is attached to CS1 this is
|
|
* where it can be started. Early init code will init
|
|
* memory on CS0.
|
|
*/
|
|
if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
|
|
do_sdrc_init(CS1, NOT_EARLY);
|
|
make_cs1_contiguous();
|
|
|
|
size1 = get_sdr_cs_size(CS1);
|
|
}
|
|
gd->ram_size = size0 + size1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize (void)
|
|
{
|
|
unsigned int size0 = 0, size1 = 0;
|
|
|
|
size0 = get_sdr_cs_size(CS0);
|
|
size1 = get_sdr_cs_size(CS1);
|
|
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = size0;
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
|
|
gd->bd->bi_dram[1].size = size1;
|
|
}
|
|
|
|
/*
|
|
* mem_init -
|
|
* - Init the sdrc chip,
|
|
* - Selects CS0 and CS1,
|
|
*/
|
|
void mem_init(void)
|
|
{
|
|
/* only init up first bank here */
|
|
do_sdrc_init(CS0, EARLY_INIT);
|
|
}
|
|
|