upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
385 lines
9.6 KiB
385 lines
9.6 KiB
/*
|
|
* Copyright 2007-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <tsec.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/mp.h>
|
|
#include <netdev.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
#include "../common/sgmii_riser.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
phys_size_t fixed_sdram(void);
|
|
|
|
int checkboard(void)
|
|
{
|
|
u8 sw;
|
|
|
|
puts("Board: P2020DS ");
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
puts("(36-bit addrmap) ");
|
|
#endif
|
|
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
/* The lower two bits are the actual vbank number */
|
|
printf("vBank: %d\n", sw & 3);
|
|
else
|
|
puts("Promjet\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
const char *board_hwconfig = "foo:bar=baz";
|
|
const char *cpu_hwconfig = "foo:bar=baz";
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
phys_size_t dram_size = 0;
|
|
|
|
puts("Initializing....");
|
|
|
|
#ifdef CONFIG_DDR_SPD
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fixed_sdram();
|
|
|
|
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
|
|
dram_size,
|
|
LAW_TRGT_IF_DDR) < 0) {
|
|
printf("ERROR setting Local Access Windows for DDR\n");
|
|
return 0;
|
|
};
|
|
#endif
|
|
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
|
dram_size *= 0x100000;
|
|
|
|
puts(" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
#if !defined(CONFIG_DDR_SPD)
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
|
|
uint d_init;
|
|
|
|
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
|
|
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
|
|
ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL;
|
|
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
|
|
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
|
|
ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL;
|
|
ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL;
|
|
ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1;
|
|
ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4;
|
|
ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5;
|
|
|
|
if (!strcmp("performance", getenv("perf_mode"))) {
|
|
/* Performance Mode Values */
|
|
|
|
ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF;
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF;
|
|
ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF;
|
|
|
|
asm("sync;isync");
|
|
|
|
udelay(500);
|
|
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF;
|
|
} else {
|
|
/* Stable Mode Values */
|
|
|
|
ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
|
|
/* ECC will be assumed in stable mode */
|
|
ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
|
|
ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
|
|
ddr->err_sbe = CONFIG_SYS_DDR_SBE;
|
|
|
|
asm("sync;isync");
|
|
|
|
udelay(500);
|
|
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
|
}
|
|
|
|
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
d_init = 1;
|
|
debug("DDR - 1st controller: memory initializing\n");
|
|
/*
|
|
* Poll until memory is initialized.
|
|
* 512 Meg at 400 might hit this 200 times or so.
|
|
*/
|
|
while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
|
|
udelay(1000);
|
|
debug("DDR: memory initialized\n\n");
|
|
asm("sync; isync");
|
|
udelay(500);
|
|
#endif
|
|
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
static struct pci_controller pcie1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
static struct pci_controller pcie2_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
static struct pci_controller pcie3_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
struct fsl_pci_info pci_info[3];
|
|
u32 devdisr, pordevsr, io_sel;
|
|
int first_free_busno = 0;
|
|
int num = 0;
|
|
|
|
int pcie_ep, pcie_configured;
|
|
|
|
devdisr = in_be32(&gur->devdisr);
|
|
pordevsr = in_be32(&gur->pordevsr);
|
|
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
|
|
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
|
|
|
|
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
|
|
printf(" eTSEC2 is in sgmii mode.\n");
|
|
if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
|
|
printf(" eTSEC3 is in sgmii mode.\n");
|
|
|
|
puts("\n");
|
|
#ifdef CONFIG_PCIE2
|
|
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
|
|
SET_STD_PCIE_INFO(pci_info[num], 2);
|
|
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
|
|
printf(" PCIE2 connected to ULI as %s (base addr %lx)\n",
|
|
pcie_ep ? "Endpoint" : "Root Complex",
|
|
pci_info[num].regs);
|
|
first_free_busno = fsl_pci_init_port(&pci_info[num++],
|
|
&pcie2_hose, first_free_busno);
|
|
|
|
/*
|
|
* The workaround doesn't work on p2020 because the location
|
|
* we try and read isn't valid on p2020, fix this later
|
|
*/
|
|
#if 0
|
|
/*
|
|
* Activate ULI1575 legacy chip by performing a fake
|
|
* memory access. Needed to make ULI RTC work.
|
|
* Device 1d has the first on-board memory BAR.
|
|
*/
|
|
|
|
pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0),
|
|
PCI_BASE_ADDRESS_1, &temp32);
|
|
if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
|
|
void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
|
|
temp32, 4, 0);
|
|
debug(" uli1575 read to %p\n", p);
|
|
in_be32(p);
|
|
}
|
|
#endif
|
|
} else {
|
|
printf(" PCIE2: disabled\n");
|
|
}
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
|
|
SET_STD_PCIE_INFO(pci_info[num], 3);
|
|
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
|
|
printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
|
|
pcie_ep ? "Endpoint" : "Root Complex",
|
|
pci_info[num].regs);
|
|
first_free_busno = fsl_pci_init_port(&pci_info[num++],
|
|
&pcie3_hose, first_free_busno);
|
|
} else {
|
|
printf(" PCIE3: disabled\n");
|
|
}
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
|
|
SET_STD_PCIE_INFO(pci_info[num], 1);
|
|
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
|
|
printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
|
|
pcie_ep ? "Endpoint" : "Root Complex",
|
|
pci_info[num].regs);
|
|
first_free_busno = fsl_pci_init_port(&pci_info[num++],
|
|
&pcie1_hose, first_free_busno);
|
|
} else {
|
|
printf(" PCIE1: disabled\n");
|
|
}
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct tsec_info_struct tsec_info[4];
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
num++;
|
|
#endif
|
|
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_init(tsec_info, num);
|
|
#endif
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_fdt_fixup(blob);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MP
|
|
void board_lmb_reserve(struct lmb *lmb)
|
|
{
|
|
cpu_mp_lmb_reserve(lmb);
|
|
}
|
|
#endif
|
|
|