upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
936 lines
23 KiB
936 lines
23 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2001-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/byteorder/swab.h>
|
|
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/* Board support for 1 or 2 flash devices */
|
|
#define FLASH_PORT_WIDTH8
|
|
|
|
typedef unsigned char FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned char FLASH_PORT_WIDTHV;
|
|
|
|
#define SWAP(x) (x)
|
|
|
|
/* Intel-compatible flash ID */
|
|
#define INTEL_COMPAT 0x89
|
|
#define INTEL_ALT 0xB0
|
|
|
|
/* Intel-compatible flash commands */
|
|
#define INTEL_PROGRAM 0x10
|
|
#define INTEL_ERASE 0x20
|
|
#define INTEL_CLEAR 0x50
|
|
#define INTEL_LOCKBIT 0x60
|
|
#define INTEL_PROTECT 0x01
|
|
#define INTEL_STATUS 0x70
|
|
#define INTEL_READID 0x90
|
|
#define INTEL_CONFIRM 0xD0
|
|
#define INTEL_RESET 0xFF
|
|
|
|
/* Intel-compatible flash status bits */
|
|
#define INTEL_FINISHED 0x80
|
|
#define INTEL_OK 0x80
|
|
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define FLASH_CYCLE1 0x0555
|
|
#define FLASH_CYCLE2 0x02aa
|
|
|
|
#define WR_BLOCK 0x20
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static ulong flash_get_size (FPW * addr, flash_info_t * info);
|
|
static int write_data (flash_info_t * info, ulong dest, FPW data);
|
|
static int write_data_block (flash_info_t * info, ulong src, ulong dest);
|
|
static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
|
|
static void flash_get_offsets (ulong base, flash_info_t * info);
|
|
void inline spin_wheel (void);
|
|
static void flash_sync_real_protect (flash_info_t * info);
|
|
static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
|
|
static unsigned char same_chip_banks (int bank1, int bank2);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
int i;
|
|
ulong size = 0;
|
|
ulong fsize = 0;
|
|
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
|
memset (&flash_info[i], 0, sizeof (flash_info_t));
|
|
|
|
switch (i) {
|
|
case 0:
|
|
flash_get_size ((FPW *) CFG_FLASH1_BASE,
|
|
&flash_info[i]);
|
|
flash_get_offsets (CFG_FLASH1_BASE, &flash_info[i]);
|
|
break;
|
|
case 1:
|
|
flash_get_size ((FPW *) CFG_FLASH1_BASE,
|
|
&flash_info[i]);
|
|
fsize = CFG_FLASH1_BASE + flash_info[i - 1].size;
|
|
flash_get_offsets (fsize, &flash_info[i]);
|
|
break;
|
|
case 2:
|
|
flash_get_size ((FPW *) CFG_FLASH0_BASE,
|
|
&flash_info[i]);
|
|
flash_get_offsets (CFG_FLASH0_BASE, &flash_info[i]);
|
|
break;
|
|
case 3:
|
|
flash_get_size ((FPW *) CFG_FLASH0_BASE,
|
|
&flash_info[i]);
|
|
fsize = CFG_FLASH0_BASE + flash_info[i - 1].size;
|
|
flash_get_offsets (fsize, &flash_info[i]);
|
|
break;
|
|
default:
|
|
panic ("configured to many flash banks!\n");
|
|
break;
|
|
}
|
|
size += flash_info[i].size;
|
|
|
|
/* get the h/w and s/w protection status in sync */
|
|
flash_sync_real_protect(&flash_info[i]);
|
|
}
|
|
|
|
/* Protect monitor and environment sectors
|
|
*/
|
|
#if defined (CFG_AMD_BOOT)
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_MONITOR_BASE,
|
|
CFG_MONITOR_BASE + monitor_flash_len - 1,
|
|
&flash_info[2]);
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_INTEL_BASE,
|
|
CFG_INTEL_BASE + monitor_flash_len - 1,
|
|
&flash_info[1]);
|
|
#else
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_MONITOR_BASE,
|
|
CFG_MONITOR_BASE + monitor_flash_len - 1,
|
|
&flash_info[3]);
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_AMD_BASE,
|
|
CFG_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
|
|
#endif
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_ENV1_ADDR,
|
|
CFG_ENV1_ADDR + CFG_ENV1_SIZE - 1, &flash_info[1]);
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR,
|
|
CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[3]);
|
|
|
|
return size;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_get_offsets (ulong base, flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
return;
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
info->start[i] = base + (i * PHYS_AMD_SECT_SIZE);
|
|
info->protect[i] = 0;
|
|
}
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_INTEL:
|
|
printf ("INTEL ");
|
|
break;
|
|
case FLASH_MAN_AMD:
|
|
printf ("AMD ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F128J3A:
|
|
printf ("28F128J3A\n");
|
|
break;
|
|
|
|
case FLASH_AM040:
|
|
printf ("AMD29F040B\n");
|
|
break;
|
|
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i], info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
static ulong flash_get_size (FPW * addr, flash_info_t * info)
|
|
{
|
|
FPWV value;
|
|
static int amd = 0;
|
|
|
|
/* Write auto select command: read Manufacturer ID */
|
|
/* Write auto select command sequence and test FLASH answer */
|
|
addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
|
|
__asm__ ("sync");
|
|
addr[FLASH_CYCLE2] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
|
|
__asm__ ("sync");
|
|
addr[FLASH_CYCLE1] = (FPW) 0x00900090; /* selects Intel or AMD */
|
|
__asm__ ("sync");
|
|
|
|
udelay (100);
|
|
|
|
switch (addr[0] & 0xff) {
|
|
|
|
case (uchar) AMD_MANUFACT:
|
|
info->flash_id = FLASH_MAN_AMD;
|
|
value = addr[1];
|
|
break;
|
|
|
|
case (uchar) INTEL_MANUFACT:
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
value = addr[2];
|
|
break;
|
|
|
|
default:
|
|
printf ("unknown\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (0); /* no or unknown flash */
|
|
}
|
|
|
|
switch (value) {
|
|
|
|
case (FPW) INTEL_ID_28F128J3A:
|
|
info->flash_id += FLASH_28F128J3A;
|
|
info->sector_count = 64;
|
|
info->size = 0x00800000; /* => 16 MB */
|
|
break;
|
|
|
|
case (FPW) AMD_ID_LV040B:
|
|
info->flash_id += FLASH_AM040;
|
|
if (amd == 0) {
|
|
info->sector_count = 7;
|
|
info->size = 0x00070000; /* => 448 KB */
|
|
amd = 1;
|
|
} else {
|
|
/* for Environment settings */
|
|
info->sector_count = 1;
|
|
info->size = PHYS_AMD_SECT_SIZE; /* => 64 KB */
|
|
amd = 0;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
if (info->sector_count > CFG_MAX_FLASH_SECT) {
|
|
printf ("** ERROR: sector count %d > max (%d) **\n",
|
|
info->sector_count, CFG_MAX_FLASH_SECT);
|
|
info->sector_count = CFG_MAX_FLASH_SECT;
|
|
}
|
|
|
|
if (value == (FPW) INTEL_ID_28F128J3A)
|
|
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
|
else
|
|
addr[0] = (FPW) 0x00F000F0; /* restore read mode */
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
|
|
/*
|
|
* This function gets the u-boot flash sector protection status
|
|
* (flash_info_t.protect[]) in sync with the sector protection
|
|
* status stored in hardware.
|
|
*/
|
|
static void flash_sync_real_protect (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F128J3A:
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
info->protect[i] = intel_sector_protected(info, i);
|
|
}
|
|
break;
|
|
case FLASH_AM040:
|
|
default:
|
|
/* no h/w protect support */
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* checks if "sector" in bank "info" is protected. Should work on intel
|
|
* strata flash chips 28FxxxJ3x in 8-bit mode.
|
|
* Returns 1 if sector is protected (or timed-out while trying to read
|
|
* protection status), 0 if it is not.
|
|
*/
|
|
static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
|
|
{
|
|
FPWV *addr;
|
|
FPWV *lock_conf_addr;
|
|
ulong start;
|
|
unsigned char ret;
|
|
|
|
/*
|
|
* first, wait for the WSM to be finished. The rationale for
|
|
* waiting for the WSM to become idle for at most
|
|
* CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
|
|
* because of: (1) erase, (2) program or (3) lock bit
|
|
* configuration. So we just wait for the longest timeout of
|
|
* the (1)-(3), i.e. the erase timeout.
|
|
*/
|
|
|
|
/* wait at least 35ns (W12) before issuing Read Status Register */
|
|
udelay(1);
|
|
addr = (FPWV *) info->start[sector];
|
|
*addr = (FPW) INTEL_STATUS;
|
|
|
|
start = get_timer (0);
|
|
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
|
|
if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
|
|
*addr = (FPW) INTEL_RESET; /* restore read mode */
|
|
printf("WSM busy too long, can't get prot status\n");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* issue the Read Identifier Codes command */
|
|
*addr = (FPW) INTEL_READID;
|
|
|
|
/* wait at least 35ns (W12) before reading */
|
|
udelay(1);
|
|
|
|
/* Intel example code uses offset of 4 for 8-bit flash */
|
|
lock_conf_addr = (FPWV *) info->start[sector] + 4;
|
|
ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
|
|
|
|
/* put flash back in read mode */
|
|
*addr = (FPW) INTEL_RESET;
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Checks if "bank1" and "bank2" are on the same chip. Returns 1 if they
|
|
* are and 0 otherwise.
|
|
*/
|
|
static unsigned char same_chip_banks (int bank1, int bank2)
|
|
{
|
|
unsigned char same_chip[CFG_MAX_FLASH_BANKS][CFG_MAX_FLASH_BANKS] = {
|
|
{1, 1, 0, 0},
|
|
{1, 1, 0, 0},
|
|
{0, 0, 1, 1},
|
|
{0, 0, 1, 1}
|
|
};
|
|
return same_chip[bank1][bank2];
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int flag, prot, sect;
|
|
ulong type, start, last;
|
|
int rcode = 0, intel = 0;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
printf ("- missing\n");
|
|
else
|
|
printf ("- no sectors to erase\n");
|
|
return 1;
|
|
}
|
|
|
|
type = (info->flash_id & FLASH_VENDMASK);
|
|
if ((type != FLASH_MAN_INTEL)) {
|
|
type = (info->flash_id & FLASH_VENDMASK);
|
|
if ((type != FLASH_MAN_AMD)) {
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
if (type == FLASH_MAN_INTEL)
|
|
intel = 1;
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
FPWV *addr = (FPWV *) (info->start[sect]);
|
|
FPW status;
|
|
|
|
printf ("Erasing sector %2d ... ", sect);
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer (0);
|
|
|
|
if (intel) {
|
|
*addr = (FPW) 0x00500050; /* clear status register */
|
|
*addr = (FPW) 0x00200020; /* erase setup */
|
|
*addr = (FPW) 0x00D000D0; /* erase confirm */
|
|
} else {
|
|
FPWV *base; /* first address in bank */
|
|
|
|
base = (FPWV *) (CFG_AMD_BASE);
|
|
base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
|
|
base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */
|
|
base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
|
|
*addr = (FPW) 0x00300030; /* erase sector */
|
|
}
|
|
|
|
while (((status =
|
|
*addr) & (FPW) 0x00800080) !=
|
|
(FPW) 0x00800080) {
|
|
if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
if (intel) {
|
|
*addr = (FPW) 0x00B000B0; /* suspend erase */
|
|
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
|
|
} else
|
|
*addr = (FPW) 0x00F000F0; /* reset to read mode */
|
|
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (intel) {
|
|
*addr = (FPW) 0x00500050; /* clear status register cmd. */
|
|
*addr = (FPW) 0x00FF00FF; /* resest to read mode */
|
|
} else
|
|
*addr = (FPW) 0x00F000F0; /* reset to read mode */
|
|
|
|
printf (" done\n");
|
|
}
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
* 4 - Flash not identified
|
|
*/
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
return 4;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD:
|
|
{
|
|
FPW data = 0; /* 16 or 32 bit word, matches flash bus width */
|
|
int bytes; /* number of bytes to program in current word */
|
|
int left; /* number of bytes left to program */
|
|
int i, res;
|
|
|
|
for (left = cnt, res = 0;
|
|
left > 0 && res == 0;
|
|
addr += sizeof (data), left -=
|
|
sizeof (data) - bytes) {
|
|
|
|
bytes = addr & (sizeof (data) - 1);
|
|
addr &= ~(sizeof (data) - 1);
|
|
|
|
/* combine source and destination data so can program
|
|
* an entire word of 16 or 32 bits
|
|
*/
|
|
for (i = 0; i < sizeof (data); i++) {
|
|
data <<= 8;
|
|
if (i < bytes || i - bytes >= left)
|
|
data += *((uchar *) addr + i);
|
|
else
|
|
data += *src++;
|
|
}
|
|
|
|
res = write_word_amd (info, (FPWV *) addr,
|
|
data);
|
|
}
|
|
return res;
|
|
} /* case FLASH_MAN_AMD */
|
|
|
|
case FLASH_MAN_INTEL:
|
|
{
|
|
ulong cp, wp;
|
|
FPW data;
|
|
int count, i, l, rc, port_width;
|
|
|
|
/* get lower word aligned address */
|
|
wp = addr;
|
|
port_width = 1;
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
}
|
|
|
|
for (; i < port_width && cnt > 0; ++i) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
|
|
for (; cnt == 0 && i < port_width; ++i, ++cp)
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
|
|
if ((rc =
|
|
write_data (info, wp, SWAP (data))) != 0)
|
|
return (rc);
|
|
wp += port_width;
|
|
}
|
|
|
|
if (cnt > WR_BLOCK) {
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
count = 0;
|
|
while (cnt >= WR_BLOCK) {
|
|
|
|
if ((rc =
|
|
write_data_block (info,
|
|
(ulong) src,
|
|
wp)) != 0)
|
|
return (rc);
|
|
|
|
wp += WR_BLOCK;
|
|
src += WR_BLOCK;
|
|
cnt -= WR_BLOCK;
|
|
|
|
if (count++ > 0x800) {
|
|
spin_wheel ();
|
|
count = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (cnt < WR_BLOCK) {
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
count = 0;
|
|
while (cnt >= port_width) {
|
|
data = 0;
|
|
for (i = 0; i < port_width; ++i)
|
|
data = (data << 8) | *src++;
|
|
|
|
if ((rc =
|
|
write_data (info, wp,
|
|
SWAP (data))) != 0)
|
|
return (rc);
|
|
|
|
wp += port_width;
|
|
cnt -= port_width;
|
|
if (count++ > 0x800) {
|
|
spin_wheel ();
|
|
count = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (cnt == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < port_width && cnt > 0;
|
|
++i, ++cp) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
}
|
|
|
|
for (; i < port_width; ++i, ++cp)
|
|
data = (data << 8) | (*(uchar *) cp);
|
|
|
|
return (write_data (info, wp, SWAP (data)));
|
|
} /* case FLASH_MAN_INTEL */
|
|
|
|
} /* switch */
|
|
return (0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word or halfword to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_data (flash_info_t * info, ulong dest, FPW data)
|
|
{
|
|
FPWV *addr = (FPWV *) dest;
|
|
ulong start;
|
|
int flag;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*addr & data) != data) {
|
|
printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr);
|
|
return (2);
|
|
}
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
*addr = (FPW) 0x00400040; /* write setup */
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer (0);
|
|
|
|
/* wait while polling the status register */
|
|
while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
|
|
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word or halfword to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_data_block (flash_info_t * info, ulong src, ulong dest)
|
|
{
|
|
FPWV *srcaddr = (FPWV *) src;
|
|
FPWV *dstaddr = (FPWV *) dest;
|
|
ulong start;
|
|
int flag, i;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
for (i = 0; i < WR_BLOCK; i++)
|
|
if ((*dstaddr++ & 0xff) != 0xff) {
|
|
printf ("not erased at %08lx (%lx)\n",
|
|
(ulong)dstaddr, (ulong)*dstaddr);
|
|
return (2);
|
|
}
|
|
|
|
dstaddr = (FPWV *) dest;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
*dstaddr = (FPW) 0x00e800e8; /* write block setup */
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer (0);
|
|
|
|
/* wait while polling the status register */
|
|
while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
|
|
*dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
*dstaddr = (FPW) 0x001f001f; /* write 32 to buffer */
|
|
for (i = 0; i < WR_BLOCK; i++)
|
|
*dstaddr++ = *srcaddr++;
|
|
|
|
dstaddr -= 1;
|
|
*dstaddr = (FPW) 0x00d000d0; /* write 32 to buffer */
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer (0);
|
|
|
|
/* wait while polling the status register */
|
|
while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
|
|
*dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
*dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash for AMD FLASH
|
|
* A word is 16 or 32 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
|
|
{
|
|
ulong start;
|
|
int flag;
|
|
int res = 0; /* result, assume success */
|
|
FPWV *base; /* first address in flash bank */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
base = (FPWV *) (CFG_AMD_BASE);
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts ();
|
|
|
|
base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
|
|
base[FLASH_CYCLE1] = (FPW) 0x00A000A0; /* selects program mode */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
start = get_timer (0);
|
|
|
|
/* data polling for D7 */
|
|
while (res == 0
|
|
&& (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
|
|
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
|
|
*dest = (FPW) 0x00F000F0; /* reset bank */
|
|
res = 1;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
void inline spin_wheel (void)
|
|
{
|
|
static int p = 0;
|
|
static char w[] = "\\/-";
|
|
|
|
printf ("\010%c", w[p]);
|
|
(++p == 3) ? (p = 0) : 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Set/Clear sector's lock bit, returns:
|
|
* 0 - OK
|
|
* 1 - Error (timeout, voltage problems, etc.)
|
|
*/
|
|
int flash_real_protect (flash_info_t * info, long sector, int prot)
|
|
{
|
|
ulong start;
|
|
int i, j;
|
|
int curr_bank;
|
|
int bank;
|
|
int rc = 0;
|
|
FPWV *addr = (FPWV *) (info->start[sector]);
|
|
int flag = disable_interrupts ();
|
|
|
|
/*
|
|
* 29F040B AMD flash does not support software protection/unprotection,
|
|
* the only way to protect the AMD flash is marked it as prot bit.
|
|
* This flash only support hardware protection, by supply or not supply
|
|
* 12vpp to the flash
|
|
*/
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
|
|
info->protect[sector] = prot;
|
|
|
|
return 0;
|
|
}
|
|
|
|
*addr = INTEL_CLEAR; /* Clear status register */
|
|
if (prot) { /* Set sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
} else { /* Clear sector lock bit */
|
|
*addr = INTEL_LOCKBIT; /* All sectors lock bits */
|
|
*addr = INTEL_CONFIRM; /* clear */
|
|
}
|
|
|
|
start = get_timer (0);
|
|
|
|
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
|
|
if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) {
|
|
printf ("Flash lock bit operation timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (*addr != INTEL_OK) {
|
|
printf ("Flash lock bit operation failed at %08X, CSR=%08X\n",
|
|
(uint) addr, (uint) * addr);
|
|
rc = 1;
|
|
}
|
|
|
|
if (!rc)
|
|
info->protect[sector] = prot;
|
|
|
|
/*
|
|
* Clear lock bit command clears all sectors lock bits, so
|
|
* we have to restore lock bits of protected sectors.
|
|
*/
|
|
if (!prot) {
|
|
/*
|
|
* re-locking must be done for all banks that belong on one
|
|
* FLASH chip, as all the sectors on the chip were unlocked
|
|
* by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope
|
|
* that banks never span chips, in particular chips which
|
|
* support h/w protection differently).
|
|
*/
|
|
|
|
/* find the current bank number */
|
|
curr_bank = CFG_MAX_FLASH_BANKS + 1;
|
|
for (j = 0; j < CFG_MAX_FLASH_BANKS; ++j) {
|
|
if (&flash_info[j] == info) {
|
|
curr_bank = j;
|
|
}
|
|
}
|
|
if (curr_bank == CFG_MAX_FLASH_BANKS + 1) {
|
|
printf("Error: can't determine bank number!\n");
|
|
}
|
|
|
|
for (bank = 0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
|
|
if (!same_chip_banks(curr_bank, bank)) {
|
|
continue;
|
|
}
|
|
info = &flash_info[bank];
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if (info->protect[i]) {
|
|
start = get_timer (0);
|
|
addr = (FPWV *) (info->start[i]);
|
|
*addr = INTEL_LOCKBIT; /* Sector lock bit */
|
|
*addr = INTEL_PROTECT; /* set */
|
|
while ((*addr & INTEL_FINISHED) !=
|
|
INTEL_FINISHED) {
|
|
if (get_timer (start) >
|
|
CFG_FLASH_UNLOCK_TOUT) {
|
|
printf ("Flash lock bit operation timed out\n");
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* get the s/w sector protection status in sync with the h/w,
|
|
* in case something went wrong during the re-locking.
|
|
*/
|
|
flash_sync_real_protect(info); /* resets flash to read mode */
|
|
}
|
|
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
*addr = INTEL_RESET; /* Reset to read array mode */
|
|
|
|
return rc;
|
|
}
|
|
|