upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mx31ads/mx31ads.c

106 lines
2.9 KiB

/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
int board_init (void)
{
int i;
/* CS0: Nor Flash */
/*
* CS0L and CS0A values are from the RedBoot sources by Freescale
* and are also equal to those used by Sascha Hauer for the Phytec
* i.MX31 board. CS0U is just a slightly optimized hardware default:
* the only non-zero field "Wait State Control" is set to half the
* default value.
*/
__REG(CSCR_U(0)) = 0x00000f00;
__REG(CSCR_L(0)) = 0x10000D03;
__REG(CSCR_A(0)) = 0x00720900;
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
/* SPI2 */
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
/* start SPI2 clock */
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
/* PBC setup */
/* Enable UART transceivers also reset the Ethernet/external UART */
readw(CS4_BASE + 4);
writew(0x8023, CS4_BASE + 4);
/* RedBoot also has an empty loop with 100000 iterations here -
* clock doesn't run yet */
for (i = 0; i < 100000; i++)
;
/* Clear the reset, toggle the LEDs */
writew(0xDF, CS4_BASE + 6);
/* clock still doesn't run */
for (i = 0; i < 100000; i++)
;
/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
gd->bd->bi_arch_number = MACH_TYPE_MX31ADS; /* board id for linux */
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
return 0;
}
int checkboard (void)
{
printf("Board: MX31ADS\n");
return 0;
}